Sage Journals: Discover world-class research

Abstract

Fire retardant intumescent coatings based on phosphates, amides, polyols, amino and acrylic binders but free from asbestos and halogenated compounds, have been developed for polyvinyl chloride (PVC) insulated power cables. The fire performance of the coatings has been assessed by employing different procedures as per relevant national and international standards. The cable specimens, with these coatings, did not show any surface spread of flame on exposure to fire. However, the coating swelled to form a spongy, cellular insulating foam, which acted as an effective barrier against the conduction of heat to the surface and to the core of the cable specimen. The coatings were found to be quite effective in reducing the burning behavior of power cables. Significant improvement in circuit failure time is noted in coated cable specimens.

Keywords

intumescent cable coating flame propagation circuit failure time fire protection smoke generation limiting oxygen index

Get full access to this article

View all access options for this article.

References

Lyons, J.W. , The Chemistry and Uses of Fire Retardants. New York: Wiley Interscience, 1970, pp 256–272.

Lewin, J.M. , Atlas S.M. and Pearce, E.M. , Flame Retardant Polymeric Materials. New York: Plenum Press, 1975, pp 36–37.

Baker, D.S. , ‘‘Flame retarding wood and timber products’, Chemistry and Industry, Vol. 2, 1977, pp 74–79.

Baker, D.S. , ‘‘Flame spread and flame retardant treatments’, Chemistry and Industry, Vol. 14, 1981, pp 485–490.

Dua, A.C. , ‘‘Fire retardant paints – effects of various additives in their formulations’, Paint India, Vol. 32, No. 7, 1982, pp 3–5.

Mishra, J.P. and Srivasamban, M.A. , ‘‘Fire retardant coatings’, Paint India, Vol. 29, No. 6, 1979, pp 21–26.

Bhatnagar, V.M. and Vergnaud, J.M. , ‘‘Fire retardant paints’, Paint India, Vol. 33, No. 7, 1983, 15–17.

Jain, J.P. , Saxena, N.K. and Singh, Ilam , ‘‘Fire retardant surface coating for cellulosic materials’, Research and Industry, Vol. 30, No. 1, 1985, pp 20–24.

Saxena, N.K. and Gupta, D.R. , ‘‘Development and evaluation of fire retardant coatings’, Fire Technology, Vol. 26, No. 4, 1990, pp 329–341.

10.

Saxena, N.K. , Sharma, Sunil and Gupta, D.R. , ‘‘Fire protection of wood based products by coating’, J. Ind. Acad. Wood Sci., Vol. 21, No. 2, 1990, pp 59–62.

11.

Smith, T. , ‘‘Flame resistant and intumescent paints and compounds’, Pigment and Resin Technology, Vol. 11, No. 4, 1982, pp 15–18.

12.

Smith, C.A. , ‘‘Review of flame retardant and intumescent paints and compounds’, Pigment and Resin Technology, Vol. 13, No. 5, 1984, pp 9–10.

13.

IEC-331, Fire resisting characteristics of electric cables. International Electro-Technical Commission. Geneva, Switzerland, 1970.

14.

IEC-332, Tests on electric cables under fire conditions. Part 1: test on a single vertical insulated wire or cable. International Electro-Technical Commission. Geneva, Switzerland, 1979

15.

ANSI/IEEE-383, Standard for type test of class IE electric cables, field splices and connections for nuclear power generating stations. The Institute of Electrical and Electronics Engineers Inc., New York, 1974

16.

ASTM D-2863, Standard methods for measuring the minimum oxygen concentration to support candle-like combustion of plastic (oxygen index), American Society for Testing and Materials, Philadelphia, PA, USA, 1977.

17.

ASTM E-662, Standard test method for specific optical density of smoke generated by solid materials. American Society for Testing and Materials, Philadelphia, PA, USA, 1979.

18.

Clark, F.B. and Lyons, J.W. , ‘‘The alcoholysis of polyphosphoric acid’, J. Amer. Chem. Soc., Vol. 88, 1966, pp 4401–4405.

Fire Protection of Electric Cables by Coating

Abstract

Keywords

Get full access to this article

References