In this paper, 30 beam tests, 48 Losberg pullout tests and 6 standard pullout tests were conducted to investigate bond-slip response of sand-coated deformed glass fibre-reinforced polymer (GFRP) rebars in concrete. The specimen parameters varied were concrete strength, embedment length, bar diameter and test method. Two failure modes including pullout failure and splitting failure were observed. The experimental bond stress-slip (τ-s) curves of sand-coated deformed GFRP rebars in concrete in pullout failure included a micro-slippage branch, a slippage branch, a descending branch and a residual branch, while the τ-s curves in splitting failure included a micro-slippage branch and a slippage branch. Based on the tests, a new bond-slip constitutive model for sand-coated deformed GFRP rebars in concrete was presented. Compared with other available models, the model proposed in this paper can provide more reliable simulations of the test results.
ACI Committee 440, “Guide for the Design and Construction of Concrete Reinforced with FRP Bars”, Farmington Hills, Michigan, USA (2006).
2.
LinX., ZhangY.X., “Novel Composite Beam Element with Bond-Slip for Nonlinear Finite Element Analyses of Steel/FRP-Reinforced Concrete Beams,”Journal of Structural Engineering, 138(12), (2013), 6–13.
3.
MalvarL.J., “Tensile and Bond Properties of GFRP Reinforcing Bars,”ACI Material Journal, 92(3) (1995) 276–285.
4.
LinX.S., ZhangY.X., “Evaluation of Bond Stress-Slip Models for FRP Reinforcing Bars in Concrete,”Composite Structures, 107, (2014), 131–141.
5.
RossettiV.A., GaleotaD., GiammatteoM.M., “Local Bond Stress–Slip Relationships of Glass Fibre Reinforced Plastic Bars Embedded in Concrete,”Materials and Structures, 28(6), (1995), 340–344.
6.
CosenzaE., ManfrediG., RealfonzoR., “Analytical Modelling of Bond between FRP Reinforcing Bars and Concrete,” In: Proceedings of second international RILEM symposium (FRPRCS-2), 164–171, London: E and FN Spon, (1995), Taerwe L, editor.
7.
CosenzaE., ManfrediG., RealfonzoR.“Behaviour and Modeling of Bond of FRP Rebars to Concrete,”Journal of Composites for Construction, 1(2) (1997) 40–51.
8.
GaoD., ZhuH., XieJ., “The Constitutive Models for Bond Slip Relation between FRP Bars and Concrete,”Industrial Construction, 33(7) (2003) 41–43.
LeeJ.Y., KimB.I., YiC.K., CheongY.G., “Bond Stress–Slip Behavior of Two Common GFRP Rebar Types with Pullout Failure,”Magazine of Concrete Research, 64(2012), 575–591.
11.
American Society for Testing and Materials, “Standard Test Methods and Definitions for Mechanical Testing of Steel Products,”Annual Book of ASTM Standards, Vol. 01.01, (2012).
12.
ACI Committee 440, “Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures,”Farmington Hills, Michigan, USA (2012).
13.
RILEM CEB FIP, “Bond Test for Reinforcing Steel 2: Pullout Test,”tRecommendation RC6, E and FN Spon (1983).
14.
LosbergA., “Force Transfer and Stress Distribution at Anchorage and Curtailment of Reinforcement,” Rep. No. 608, Chalmers Univ. of Technology, Dept. of Building Technology, Goteborg, Sweden (1963).
15.
OkeloR., “Realistic Bond Strength of FRP Rebars in NSC from Beam Specimens,”Journal of Aerospace Engineering, 20(3), (2007), 133–140.
16.
AielloM.A., LeoneM., PecceM., “Bond Performances of FRP Rebars-Reinforced Concrete,”Journal of materials in civil engineering, 19(3) (2007) 205–213.
17.
RILEM CEB FIP, “Test of the Bond Strength of Reinforcement of Concrete: Test by Bending”. Recommendation RC5, E and FN Spon (1978).
18.
BaenaM., TorresL., TuronA., BarrisC., “Experimental Study of Bond Behaviour Between Concrete and FRP Bars Using a Pull-Out Test,”Composites Part B: Engineering40(8) (2009) 784–797.
19.
AchillidesZ., PilakoutasK., “Bond Behaviour of Fibre Reinforced Polymer Bars Under Direct Pullout Conditions,”Journal of Composites for Construction, 8(2) (2004) 173–181.
20.
Chinese Standard, “Standard for Test Method of Concrete Structures,”Architecture and Building Press, Beijing, China (2010).
21.
OkeloR., YuanR., “Bond Strength of Fiber Reinforced Polymer Bars in Normal Strength Concrete,”Journal of Composites for Construction, 9(3) (2005), 203–213.
22.
WonJ.P., ParkC.G., KimH.H., LeeS.W., WonC., “Bond Behaviour of FRP Reinforcing Bars in High-Strength Steel Fiber-Reinforced Concrete,”Polymers and Polymer Composites, 15(7) (2007) 569–578.
23.
WambekeB., ShieldC.K., “Development Length of Glass Fiber-Reinforced Polymer Bars in Concrete,”ACI Structural Journal, 103(1) (2006) 11–17.
24.
NanniA., UtsunomiyaT., YonekuraH., “Transmission of Prestressing Force to Concrete by Bonded Fiber Reinforced Plastic Tendons,”ACI Structural Journal, 89(3) (1992) 335–344.
25.
TighiouartB., BenmokraneB., GaoD., “Investigation of Bond in Concrete Member with Fibre Reinforced Polymer (FRP) Bars,”Construction and Building Materials, 12(1998) 453–462.
26.
LippensB.C., De BoerJ.H., “Studies on Pore Systems in Catalysts: V. The t Method,”Journal of Catalysis, 4(3) (1965) 319–323.
27.
SpiegelM., SchillerJ.J., SrinivasanR.A., “Schaum's Outline of Theory and Problems of Probability and Statistics (2nd Edition),”The McGraw-Hill Companies, USA (2000).
