The influence of a rare-earth coupling agent (RE) on the non-isothermal crystallization behaviour of PP was studied by differential scanning calorimetry. Experimental results showed that use of RE caused a decrease in the crystallization temperature, melting temperature and crystallinity of PP in WF/RE/PP compared with those in WF/PP. The Avrami, Ozawa and Mo methods were used to describe the crystallization process. The Avrami and Ozawa methods neglected the secondary crystallization and followed primary crystallization. The Mo approach could successfully describe the overall crystallization process. The relation of the half times of crystallization (t1/2) of the three samples, t1/2(WF/PP) <t1/2(WF/RE/PP) <t1/2 (PP) and the F(T)(WF/PP)< F(T)(WF/RE/PP)<F(T)(PP), suggested that the crystallization rate of WF/RE/PP was slower than that of WF/PP The activation energy was calculated by using the Kissinger method and the results indicated that the incorporation of RE resulted in a compatible effect, which led to a reduction in the crystallization rate and an increase in activation energy compared with WF/PP.
GrubbstromG., and OksmanK., Influence of wood flour moisture content on the degree of silane-crosslinking and its relationship to structure-property relations of wood-thermoplastic composites, Compos Sci Technol., 69 (2009), 1045–1050.
2.
SoniaM.B., GrazielaS., and SimoneM.L., New polymeric-coupling agent for polypropylene/wood-flour composites, Polym Test., 26, (2007), 619–628.
3.
KarmarkarA., ChauhanS.S., ModakJ.M., and ChandaM., Mechanical properties of wood–fiber reinforced polypropylene composites: effect of a novel compatibilizer with isocyanate functional group, Compos Part A-Appl Sci., 38 (2007), 227–233.
4.
GuoC.G., and WangQ.W., Influence of m-isopropenyl-α, α-dimethylbenzyl isocyanate grafted polypropylene on interfacial interaction of polypropylene/wood-flour composites, J. Appl Polym. Sci., 109 (2008), 3080–3086.
5.
KazayawokoM., BalatineczJ.J., and MatuanaL.M., Surface modification and adhesion mechanisms in woodfiber–polypropylene composites, J. Mater Sci., 34 (1999), 6189–6199.
6.
MohantyA.K., DryalL.T., and MisraM., Novel hybrid coupling agent as an adhesion promoter in natural fiber reinforced powder polypropylene composites, J. Mater Sci Lett., 21 (2002), 1885–1888.
7.
CaoJ.Z., WangY., XuW.Y., and WangL., Preliminary study of viscoelastic properties of MAPP-modified wood flour/polypropylene composites, Forestry research in China., 12 (2010), 85–89.
8.
SunZ.Y., HanH.S., and DaiG.C., Mechanical properties of injection-molded natural fiber-reinforced polypropylene composites: formulation and compounding processes, J. Reinf Plast Comp. doi:10.1177/0731684408100264.
9.
GassanJ., and BledzkiA.K., The influence of fiber-surface treatment on the mechanical properties of jute–polypropylene composites, Compos Part A-Appl S., 28 (1997), 1001–1005.
10.
BotaroV.R., GandiniA., and BelgacemN., Heterogeneous chemical modification of cellulose for composite materials, J. Thermoplast Compos., 18 (2005), 107–117.
11.
MaldasD., and KoktaB. V., Improving adhesion of wood fiber with polystyrene by chemical treatment of fiber with coupling agent and the influence on the mechanical properties of the composites, J. Adhes Sci Technol., 3 (1989), 529–539.
12.
ReicheltL., and PollerS., Uber die umsetzung von cellulose und lignin mit isocyanates bzw, isocyanatgruppenhaltigen prapolymeren, Acta Polym., 32 (1981), 172–176.
13.
XieY., CallumA.S., and XiaoZ., Silane coupling agents used for natural fiber/polymer composites: A review, Compos Part A-Appl S., 41 (2010), 806–819.
14.
JiaoC., WangZ., LiangX., and HuY., Non-isothermal crystallization kinetics of silane crosslinked polyethylene, Polym Test., 24 (2005), 71–80.
15.
XuZ.W., HuangY.D., SongY.J., ZhangC.H., and LiuL., Surface characteristics of rare-earth treated carbon fiber and interfacial properties of composites, J. Rare. Earth., 25 (2007) 462–468.
16.
RyszardK., and MariaW.P., Flammability and fire resistance of composites reinforced by natural fibers. Polym Advan Technol., 19 (2008), 446–453.
17.
YaoF., WuQ.L., LeiY., GuoW.H., and XuY.J., Thermal decomposition kinetics of natural fibers: activation energy with dynamic thermogravimetric analysis. Polym Degrad Stabil., 93 (2008), 90–98.
18.
SombatsompopN., KositchaiyongA., and WimolmalaE., Experimental analysis of temperature and crystallinity profiles of wood sawdust/polypropylene composites during cooling. J Appl Polym Sci., 102 (2006), 1896–1905.
19.
MantiaF.P.L., and MorrealeM., Accelerated weathering of polypropylene/wood flour composites. Polym Degrad Stabil., 93 (2008), 1252–1258.
20.
OzawaT., Kinetics of non-isothermal crystallization. Polymer., 12 (1971), 150–158.
21.
MaityJ., JacobC., DasC.K., AlamS., and SinghR.P., Direct fluorination of twaron fiber and the mechanical, thermal and crystallization behaviour of short Twaron fiber reinforced polypropylene composites. Compos part A- Appl S., 39 (2008), 825–833.
22.
SvobodaP., SvobodovaD., SlobodianP., OugizawaT., and InoueT., Crystallization kinetics of polypropylene/ethylene–octene copolymer blends. Polym Test., 28, (2009), 215–222.
23.
Razavi-NouriM., Ghorbanzadeh-AhangariM., FereidoonA., and JahanshahiM., Effect of carbon nanotubes content on crystallization kinetics and morphology of polypropylene. Polym Test., 28, (2009), 46–52.
24.
ArdanuyM., VelascoJ.I., RealinhoV., ArenconD., and MartinezA.B., Non-isothermal crystallization kinetics and activity of filler in polypropylene/Mg-Al layered double hydroxide nanocomposites, Thermochim Acta., 479, (2008), 45–52.
25.
Karger-KocsisJ., Polypropylene structure, blends and composites, Chapman and Hall, London, 1995.
26.
ZafeiropoulosN.E., BaillieC. A., and MatthewsF.L., A study of transcrystallinity and its effect on the interface in flax fibre reinforced composite materials. Compos part A-Appl S., 32, (2001), 525–543.
27.
Girone'sJ., PimentaM.T.B., VilasecaF., CarvalhoA.J.F., MutjeP., and CurveloA.A.S., Blocked diisocyanates as reactive coupling agents: Application to pine fiber–polypropylene composites. Carbohyd Polym., 74, (2008), 106–113.
28.
PracellaM., ChionnaD., and AnguillesiI., Functionalization, compatibilization and properties of polypropylene composites with hemp fibres. Compos Sci Technol., 66 (2006), 2218–2230.
29.
AchaB.A., ReboredoM.M., and MarcovichN.E., Effect of coupling agents on the thermal and mechanical properties of polypropylene–jute fabric composites. Polym Int., 55 (2006), 1104–1113.
30.
DevauxE., GérardJ.F., BourginP., and ChabertB., Two-dimensional simulation of crystalline growth fronts in a polypropylene/glass-fibre composite depending on processing conditions. Compos Sci Technol, 48 (1993), 199–203.
31.
ArbelaizA., Fern′andezB., RamosJ.A., and MondragonI., Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effect of treatments. Thermochim Acta., 440 (2006), 111–121.
32.
QiuS.C., ZhengY.Y., ZengA.R., and GuoY., Prediction of non-isothermal crystallization parameters for isotactic polypropylene, Thermochim Acta., 512 (2010), 28–33.
33.
ArdanuyM., VelascoJ.I., RealinhoV., and ArenconD., Non-isothermal crystallization kinetics and activity of filler in polypropylene/Mg-Al layered double hydroxide nanocomposites, Thermochim Acta., 479 (2008), 45–52.
34.
AvramiM., Kinetics of phase change. Temperature-transformation-time relations for random distribution of nuclei, J. Chem Phys., 8 (1940), 212–215.
35.
MoZ.S., A method for the nonisothermal crystallization kinetics of polymers, Acta Polym Sin., 7 (2008), 656–660.
36.
KissingerH.E., Variation of peak temperature with heating rate in differential thermal analysis, J Res Natl Bur Stand., 57 (1956), 217–221.
