Hybrid-loop servo control system of double toggle mechanical press for flexible forming process based on sliding mode control and neural network techniques
Restricted accessResearch articleFirst published online January, 2016
Hybrid-loop servo control system of double toggle mechanical press for flexible forming process based on sliding mode control and neural network techniques
A hybrid-loop servo control system based on sliding-mode control and neural network control is proposed in this article to realize flexible forming process on a double toggle mechanical press. First, kinematics and dynamic analysis of the drive system are conducted to derive the control objective behavior. Then, the structure of the hybrid-loop system is introduced; sliding-mode control is applied to compensate the punch position errors. In the inner loop of the servo motor, complementary sliding-mode control is used to track the motor rotation angle, and a radial basis function neural network estimator is applied to eliminate the considerable load disturbances in the stamping stage. Finally, experimental hardware is constructed and a compound blanking and drawing process is carried out to validate the proposed servo control system in practice. With different materials and drawing depth, high tracking accuracy and robustness are exhibited to realize favorable forming performance.
OsakadaKMoriKAltanT. Mechanical servo press technology for metal forming. CIRP Ann: Manuf Techn2011; 60: 651–672.
2.
OsakadaKMatsumotoROtsuM. Precision extrusion methods with double axis servo-press using counter pressure. CIRP Ann: Manuf Techn2005; 54(1): 245–248.
3.
MoriKAkitaKAbeY. Springback behaviour in bending of ultra-high-strength steel sheets using CNC servo press. Int J Mach Tool Manu2007; 47(2): 321–325.
4.
OtsuMYamagataCOsakadaK. Reduction of blanking noise by controlling press motion. CIRP Ann: Manuf Techn2003; 52(1): 245–248.
5.
TokuzLCUyanS. Modeling, simulation and control of a four-bar mechanism with a brushless servo motor. Mechatronics1997; 7(4): 369–383.
6.
ChoiHJangDKoB. A study on the optimization of a mechanical press drive. Proc IMechE, Part B: J Engineering Manufacture2004; 218(2): 189–196.
7.
HeYPZhaoSDWangJ. Working mechanisms of the mechanical press with low-speed forging-stamping. J Mech Eng2006; 42(2): 145–149 (in Chinese).
8.
ShangWFZhaoSDShenYJ. A flexible tolerance genetic algorithm for optimal problems with nonlinear equality constraints. Adv Eng Inform2009; 23(3): 253–264.
9.
SongQYGuoBFLiJ. Drawing motion profile planning and optimizing for heavy servo press. Int J Adv Manuf Tech2013; 69: 2819–2831.
10.
JinMLeeJChangPH. Practical nonsingular terminal sliding-mode control of robot manipulators for high-accuracy tracking control. IEEE T Ind Electron2009; 56(9): 3593–3601.
11.
ShangWFZhaoSD. A sliding mode flux-linkage controller with integral compensation for switched reluctance motor. IEEE T Magn2009; 45(9): 3322–3328.
12.
HuangYSSungCC. Implementation of sliding mode controller for linear synchronous motors based on direct thrust control theory. IET Control Theory A2010; 4(3): 326–338.
13.
SuJPWangCC. Complementary sliding control of non-linear system. Int J Control2002; 75(5): 360–368.
14.
LinFJChenSYHuangMS. Adaptive complementary sliding-mode control for thrust active magnetic bearing system. Control Eng Pract2011; 19: 711–722.
15.
WangWLiuXD. Fuzzy sliding mode control for a class of piezoelectric system with a sliding mode state estimator. Mechatronics2010; 20(6): 712–719.
16.
VuNTYuDYChoiHH. T-S fuzzy-model-based sliding-mode control for surface-mounted permanent magnet synchronous motors considering uncertainties. IEEE T Ind Electron2013; 60(10): 4281–4291.
17.
FeiJTZhouJ. Robust adaptive control of MEMS triaxial gyroscope using fuzzy compensator. IEEE T Syst Man Cy B2012; 42(6): 1599–1607.
18.
KarayiannisNBRandolph-GipsMM. On the construction and training of reformulated radial basis function neural networks. IEEE T Neural Networ2003; 14(4): 835–846.
19.
AbiyevRHKaynakO.Fuzzy wavelet neural networks for identification and control of dynamic plants - A novel structure and a comparative study. IEEE T Ind Electron2008; 55(8): 3133–3140.
20.
WaiRJMuthusamyR. Fuzzy-neural-network inherited sliding-mode control for robot manipulator including actuator dynamics. IEEE T Neural Network Learn Syst2013; 24(2): 274–287.
21.
BukkemsBKosticDde JagerB. Learning-based identification and iterative learning control of direct-drive robots. IEEE T Contr Syst T2005; 13(4): 537–549.
22.
LinJLianRJ. Hybrid self-organizing fuzzy and radial basis-function neural-network controller for gas-assisted injection molding combination systems. Mechatronics2010; 20(6): 698–711.
23.
FeiJTDingHF. Adaptive vibration control of microelectromechanical systems triaxial gyroscope using radial basis function sliding mode technique. Proc IMechE, Part I: J Systems and Control Engineering2013; 227(12): 264–269.
24.
FeiJTDingHF. Adaptive sliding mode control of dynamic system using RBF neural network. Nonlinear Dynam2012; 70(2): 1563–1573.
25.
ChengHLPeiLT. Experimental study on a hybrid-driven servo press using iterative learning control. Int J Mach Tool Manu2008; 48(2): 209–219.
26.
WeiSGZhaoSDZhengJM. Self-tuning dead-zone compensation fuzzy logic controller for a switched-reluctance-motor direct-drive hydraulic press. Proc IMechE, Part I: J Systems and Control Engineering2009; 223(5): 647–656.
27.
ChengPYChenPJLinYT. Small mechanical press with double-axis servo system for forming of small metal products. Int J Adv Manuf Tech2013; 68: 2371–2381.
28.
TsangKMWangJ.Control of a permanent magnet synchronous motor using a second-order non-linear trajectory smoother. Proc IMechE, Part I: J Systems and Control Engineering2005; 219(18): 565–575.
29.
TeelAR. Asymptotic convergence from Lp stability. IEEE T Automat Contr1999; 44(11): 2169–2170.
30.
YanHSYehCC. Integrated kinematic and dynamic designs for variable-speed plate cam mechanisms. Proc IMechE, Part C: J Mechanical Engineering Science2011; 225(1): 194–203.
31.
WickCBenedictJTVeilleuxRF. Tool and manufacturing engineers handbook, vol. 1 materials, cold-working & non-tradition technology. Dearborn, MI: Society of Manufacturing Engineers, 1983, pp.15–63.
