Modelling,design,and testing of an electromagnetic power generator optimized for integration into shoes

Abstract

Modelling and analysis of an electromagnetic generator designed for harvesting power produced during walking is presented. The generator is designed to be unobtrusive to the user by embedding it within the thickness of a normal shoe sole, and by applying a passive generation principle which requires minimal additional force over that normally exerted by the user during walking. In this way, a portion of the power used in walking is harvested for potential use in powering portable electronic devices. Analysis of different geometrical and material properties is applied to identify conditions for optimized designs; average power levels of up to 14 mW (200 mW of instantaneous power) are demonstrated within a volume of 15 × 15 × 100 mm³ at a walking speed of 2 steps per second. At least two of these volumes can be easily accommodated within a shoe heel to provide up to a 56 mW average power per user, and higher power levels can be achieved for faster walking or running speeds.

Keywords

energy harvesting electromagnetic generator wearable electronics

Get full access to this article

View all access options for this article.

References

Kazmierski

T. J.

Beeby

(Eds) Energy harvesting systems: principles, modeling and applications, 2011 (Springer, New York, Dordrecht, Heidelberg, London).

Mitcheson

P. D.

Yeatman

E. M.

Rao

G. K.

Holmes

A. S.

Green

T. C.

Energy harvesting from human and machine motion for wireless electronic devices. Proc. IEEE, 2008, 96(9), 1457–1486.

Saha

O’Donnell

Loder

Beeby

Tudor

Optimization of an electromagnetic energy harvesting device. IEEE Trans. Magn., 2006, 42(10), 3509–3511.

Granstrom

Feenstra

Sodano

H. A.

Farinholt

Energy harvesting from a backpack instrumented with piezoelectric shoulder straps. Smart Mater. Struct., 2007, 16, 1810–1820.

Baedekers

Oliver

Priya

Pen harvester for powering a pulse rate sensor. J. Phys. D: Appl. Phys., 2009, 42, 105105 (9 pp.).

Starner

Human-powered wearable computing. IBM Syst. J., 1996, 35(3&4), 618–629.

Yaglioglu

Modeling and design considerations for a micro-hydraulic piezoelectric power generator. Master’s Thesis, EECS Department, Massachusetts Institute of Technology, 2002.

Mateu

Moll

Optimum piezoelectric bending beam structures for energy harvesting using shoe inserts. J. Intell. Mater. Syst. Struct., 2005, 16(10), 835–845.

Kendall

C. J.

Kymissis

Paradiso

Parasitic power harvesting in shoes. The Second IEEE International Conference on Wearable Computing, Pittsburgh, Pennsylvania, 19–20 October 1998, pp. 132–139.

10.

Shenck

N. S.

Paradiso

J. A.

Energy scavenging with shoe-mounted piezoelectrics. IEEE Micro, 2001, 21(3), 30–42.

11.

Duffy

Carroll

Electromagnetic generators for power harvesting. In Proceedings of the 35th IEEE Power electronics specialists conference, Aachen, Germany, 20–25 June 2004, vol. 3, pp. 2075–2081 (IEEE).

12.

Spreemann

Hoffmann

Folkme

Manoli

Numerical optimization approach for resonant electromagnetic vibration transducer designed for random vibration. J. Micromech. Microengng, 2008, 18, 104001.

13.

Saria

Balkana

Kulah

An electromagnetic micro power generator for wideband environmental vibrations. Sens. Actuators A: Phys., 2008, 145-146, 405–413.

14.

Yang

Lee

Xiang

Xie

J. H.

Kotlanka

R. K.

Low

S. P.

Feng

Electromagnetic energy harvesting from vibrations of multiple frequencies. J. Micromech. Microengng, 2009, 19(3), 035001.

15.

Arnold

D. P.

Review of microscale magnetic power generation. IEEE Trans. Magn., 2007, 43(11), 3940–3951.

16.

Winter

D. A.

Foot trajectory in human gait: a precise and multifactorial motor control task. Phys. Therapy, 1992, 72(1) 45–53.

17.

Kram

J. M.

Kram

Kuo

A. D.

Mechanical work for step-to-step transitions is a major determinant of the metabolic cost of human walking. J. Exp. Biol., 2002, 205, 3717–3727.

18.

McCarthy

Bash

Pekarek

Design of an air-core linear generator drive for energy harvest applications. In Proceedings of the 23rd Annual IEEE Conference on Applied power electronics, Austin, Texas, 24–28 February 2008, pp. 1832–1838 (IEEE Press, Piscataway, New Jersey).

19.

von Büren