The aim of this paper is to optimize the input parameters of diesel engine with respect to hydrocarbon emission and smoke opacity through experimentation and Taguchi approach. Four parameters, namely, compression ratio, fuel injection timing, air temperature, and air pressure were varied at five different levels and their effect on hydrocarbon emission and smoke opacity under no load, half load, and full load conditions were recorded. The optimum combination of control/input parameters leading to the optimum values of performance parameters/response variables, were determined using signal-to-noise ratio, analysis of means, and analysis of variance. Confirmation tests were performed to check the validity of the results, which revealed good agreement between the predicted and the experimental values of the response variables at optimum combination of the input parameters.
SimsEHRitchiewR andChadwickaJ.Turbocharging of an agricultural tractor engine. J Agric Eng Res1990;
47: 177–186.
2.
GronmanASallinenPHonkatukiaJet al.
Design and experiments of two-stage intercooled electrically assisted turbocharger. Energy Convers Manage2015;
111: 115–124.
3.
KadunicSSchererFBaarRet al. petrol engine power and efficiency through an AC driven intercooling system. In: 11th international conference on turbochargers and turbocharging 2014, The British Museum, London, 13–14 May 2014.
4.
LiewCLiHLiuSet al.
Exhaust emissions of a H2-enriched heavy-duty diesel engine equipped with cooled EGR and variable geometry turbocharger. Fuel2012;
91: 155–163.
5.
MostafaviM andAgnewB.Thermodynamic analysis of combined diesel engine and absorption unit turbocharged engine with intercooling. Appl Therm Eng1996;
16: 733–740.
6.
MuqeemM andKumarM.Turbocharging of IC engine: A review. Int J Mech Eng Technol2013;
4: 142–149.
7.
YangMGuYDengKet al.
Analysis on altitude adaptability of turbocharging systems for a heavy duty diesel engine. Appl Therm Eng2018;
128: 1196–1207.
8.
ZhengZFengHMaoBet al.
A theoretical and experimental study on the effects of parameters of two stage turbocharging system on performance of a heavy duty diesel engine. Appl Therm Eng2018;
129: 822–832.
9.
ZhuD andZhengX.Asymmetric twin scroll turbocharging in diesel engines for energy and emission improvement. Energy2017;
141: 702–714.
10.
FuJLiuJWangYet al.
A comparative study on various turbocharging approaches based on IC engine exhaust energy recovery. Appl Energy2014;
113: 248–257.
11.
ZamboniGMoggiaS andCapobiancoM.Hybrid EGR and turbocharging systems control for low NOx and fuel consumption in an automotive diesel engine. Appl Energy2016;
165: 839–848.
12.
KumarBRSaravananSRanaDet al.
Combined effect of injection timing and exhaust gas recirculation (EGR) on performance and emissions of a DI diesel engine fuelled with next generation advanced biofuel diesel blends using response surface methodology. Energy Convers Manage2016;
123: 470–486.
13.
KhoobbakhtGNajafiGKarimiMet al.
Optimization of operating factors and blended levels of diesel, biodiesel and ethanol fuels to minimize exhaust emissions of diesel engine using response surface methodology. Appl Therm Eng2016;
99: 1006–1017.
14.
KarnwalAHasanMKumarNet al.
Multi-response optimization of diesel engine performance parameters using thumba biodiesel-diesel blends by applying Taguchi method and grey relational analysis. Int J Autom Technol2011;
12: 599–610.
15.
MaheswariNBalajiC andRameshA.A nonlinear regression based multi-objective optimization of parameters based on experimental data from an IC engine fuelled with biodiesel blends. Biomass Bioenergy2011;
35: 2171–2183.
16.
AlonsoJMAlvarruizFDeantesjmHLet al.
G. Combining neural networks and genetic algorithms to predict and reduce diesel engine emission. IEEE Trans Evol Comput . 2007;
11: 46–55.
17.
GanapathyTMurugesanK andGakkharRP.Performance optimization of jatropha engine model using Taguchi approach. Appl Energy2009;
86: 2476–2486.
18.
YoneyaS. Development of multivariate analysis scheme for simultaneous optimization of heavy duty diesel engines. In: Mitsubishi motors technical review, 2002, vol. 14, pp. 24–30.
19.
UnalR andDeanEB. Taguchi approach to design optimization for quality and cost: An overview. In: Proceedings of annual conference of the international society of parametric analysts, Europe, 21–24 May 1991, pp. 28–32.
20.
SalemHBahnasysHE andElbazM.Prediction of the effect of injection parameters on NOx emission and burning quality in the direct injection diesel engine using a modified multizone model. J Autom Eng1998;
212: 427–436.
21.
YangBMellorM andChenSK. Multiple injections with EGR effects on NOx emissions for DI diesel engines analyzed using an engineering model. SAETechnical Paper 2002-2001-2774, 2002.
22.
WinZGakkharRPJainSCet al.
Investigation of diesel engine operating and injection system parameters for low noise, emissions and fuel consumption using Taguchi method. J Autom Eng2005;
219: 1237–1251.
23.
WuZYWuHW andHungCH.Applying Taguchi method to combustion characteristics and optimal factors determination in diesel/biodiesel engines with port-injection LPG. Fuel2014;
117: 8–14.
24.
WuHW andWuZY.Using Taguchi method on combustion performance of a diesel engine with diesel/biodiesel blend and port inducting H2. Appl Energy2013;
104: 362–370.
25.
RoySDasAK andBanerjeeR.Application of Grey-Taguchi based multi-objective optimization strategy to calibrate the PM-NHC-BSFC trade-off characteristic of a CRDI dual-fuel engine. J Nat Gas Sci Eng2014;
21: 524–531.
26.
VellaiyanS andAmirthagadeswaranKS.Taguchi-Grey relational-based multi-response optimization of the water-in-diesel emulsification process. J Mech Sci Technol2016;
30: 1399–1404.
27.
NatarajanSTrasyKASrihariNet al.
Effects of injection timing on CI engine fuelled with algae oil blend with Taguchi technique. Energy Procedia2017;
105: 1043–1050.
28.
VenkatanarayanaB andRatnamC. Selection of optimal performance parameters of DI diesel engine using Taguchi approach. Biofuels2017. DOI:10.1080/17597269.2017.1329492.
29.
MuqeemMSherwaniAFAhmadMet al.
Taguchi-based combined grey relational and principal component analyses for multi-response optimization of diesel engines. Grey Syst: Theory Appl2017;
7: 408–425.
30.
KumarM andMuqeemM.Design of an intercooler of a turbocharger unit to enhance the volumetric efficiency of diesel engine. Int J Mech Eng Technol2013;
4: 1–10.
31.
PopeJ.Analysis of a turbocharger system for a diesel engine. Rensselaer Polytechnic Institute Hartford, Connecticut, USA, 2009.
32.
BrouillardEBurnsBKhanNet al. The design and manufacturing of an intercooler assembly with R-134a integration. Wentworth Institute of Technology, Boston, USA, 2011. http://myweb.wit.edu/brouillarde.
33.
DavidCArivazhaganM andIbrahimM.Spent wash de-colourization using nano-Al2O3/kaolin photocatalyst: Taguchi and ANN approach. J Saudi Chem Soc2015;
19: 537–548.
34.
Qasim NisarSShahAet al.
Optimization of process parameters for machining of AISI-1045 steel using Taguchi design and ANOVA. Simul Model Pract Theory2015;
59: 36–51.
35.
LindmanH.Analysis of variance in experimental design.
New York:
Springer Verlag, 1992.
36.
RossPJ.Taguchi techniques for quality engineering.
Singapore:
McGraw-Hill International Editions, 1996.
