This study presents a statistically guided framework for multi-objective optimization of a 50 MW parabolic trough collector (PTC) concentrated solar power (CSP) plant operating under the high direct normal irradiance (DNI) conditions of Rif Dimashq, Syria. Four key design parameters namely: collector count, thermal energy storage (TES) capacity, row spacing, and tracking-axis tilt were evaluated using an integrated Taguchi design, Analysis of Variance (ANOVA), and Grey Relational Analysis (GRA) approach supported by annual performance simulations conducted in Greenius. The results showed that TES capacity was the dominant factor, contributing 96.77% of the variation in net annual electricity generation and more than 75% of the variation in field and system efficiencies. The optimal configuration (600 collectors, 6 h TES, 17.3 m row spacing, and 25° tilt) achieved an levelized cost of electricity (LCOE) of €0.1158/kWh, a net annual generation of 194,234 MWh, a field efficiency of 44.46%, and a system efficiency of 14.8%. Regression-based surrogate models developed for all performance metrics demonstrated excellent predictive reliability (R2 = 96.15–99.36%). This framework provides an effective and computationally efficient tool for assessing design trade-offs and supporting preliminary planning and feasibility assessment of CSP-PTC plants in high-irradiance regions.
GutiRGuerraKHaroP. Market profitability of CSP-biomass hybrid power plants: towards a firm supply of renewable energy. Renewable Energy; 335: 120754. DOI: 10.1016/j.apenergy.2023.120754. Epub ahead of print 2023.
2.
LiuHZhaiRPatchigollaK, et al.Multi-objective optimisation of a thermal-storage PV-CSP-wind hybrid power system in three operation modes. Energy2023; 284: 129255.
3.
HamiltonWTHustedMANewmanAM, et al.Dispatch optimization of concentrating solar power with utility-scale photovoltaics. Springer US, 2020. DOI: 10.1007/s11081-019-09449-y. Epub ahead of print 2020.
4.
PraveenRPBaseerMAAwanAB, et al.Performance analysis and optimization of a parabolic trough solar power plant in the middle East region. Energies2018; 11: 1–18.
5.
ElsayedKHosnyMAbuS, et al.CSP plants cooling technology: techno-economic analysis, parametric study, and stacking ensemble learning forecasting. Therm Sci Eng Prog2024; 54: 102777.
6.
AlvarRFNAguirreRAManzanoJPP. Multi-objective optimization of parabolic trough concentrated solar power with thermal energy storage plant parameters using elitist nondominated sorting genetic algorithm. In: IEEE Reg 10 Annu Int Conf Proceedings/TENCON 2020; 2020-Novem, pp. 314–319. IEEE (Institute of Electrical and Electronics Engineers).
7.
MdallalAHaridySMahmoudM, et al.Modelling and optimization of concentrated solar power using response surface methodology: a comparative study of air, water, and hybrid cooling techniques. Energy Convers Manag2026; 319: 118915.
8.
PraveenRPBaseerMA. Design, performance analysis and optimization of a 100 MW concentrated solar power plant with thermal energy storage. Proceedings of the 2018 IEEE International Conference on Current Trends toward Converging Technologies (ICCTCT 2018), Coimbatore,India. IEEE (Institute of Electrical and Electronics Engineers). 2020, pp. 3–8.
9.
PanCAFerruzzaDGuédezR, et al.Identification of optimum molten salts for use as heat transfer fluids in parabolic trough CSP plants. A techno-economic comparative optimization. SolarPACES 2017 conference proceedings, AIP Conference Proceedings, Volume 2033, Article030012 (pp. 030012-1–030012-8). AIP Publishing, 2018.
10.
BoukeliaTEArslanOMecibahMS. ANN-based optimization of a parabolic trough solar thermal power plant. Appl Therm Eng2016; 107: 1210–1218.
11.
ZayedMEZhaoJElsheikhAH, et al.Optimal design parameters and performance optimization of thermodynamically balanced dish/stirling concentrated solar power system using multi-objective particle swarm optimization. Appl Therm Eng2020; 178: 115539.
12.
AhmadMZeeshanM. Multi-objective optimization of concentrated solar power plants from an energy-water-environment nexus perspective under distinct climatic conditions – part B: environ-economic analysis. J Clean Prod2023; 385: 135689.
13.
ElbehMBSleitiAK. Analysis and optimization of concentrated solar power plant for application in arid climate. Energy Sci Eng2021; 9: 784–797.
14.
MaYMorosukTLuoJ, et al.Superstructure design and optimization on supercritical carbon dioxide cycle for application in concentrated solar power plant. Energy Convers Manag2020; 206: 112290.
15.
LiangYChenJLuoX, et al.Simultaneous optimization of combined supercritical CO2 Brayton cycle and organic Rankine cycle integrated with concentrated solar power system. J Clean Prod2020; 266: 121927.
16.
TrevisanSGuR. Thermo-economic optimization of an air driven supercritical CO2 Brayton power cycle for concentrating solar power plant with packed bed thermal energy storage balance of plant. 2020; 211: 1373–1391.
17.
BabaeiAAminianESaffariH. Enhanced heat transfer performance in a parabolic trough solar collector: a CFD investigation of silver and copper nanofluids utilizing porous medium. Proc Inst Mech Eng Part E J Process Mech Eng2024; 1–25. DOI: 10.1177/09544089241289072. Epub ahead of print.
18.
Hemmat EsfeMSarbaz KarajabadMToghraieD. Recent advances in evacuated tube solar collectors research: a comprehensive review, statistical evaluation and bibliometric analysis from 1976 to 2024. J Therm Anal Calorim2025; 150: 15849–15865.
19.
Hemmat EsfeMMotallebiSMToghraieD. Statistical analysis of published documents and providing a road map in the field of using nanofluids in flat solar collectors. J Therm Anal Calorim2025; 150: 13897–13910.
20.
MozafarifardMAzimiASobhaniH, et al.Numerical study of anomalous heat conduction in absorber plate of a solar collector using time-fractional single-phase-lag model. Case Stud Therm Eng2022; 34: 102071.
21.
Ben TaherMAPelayURusseilS, et al.A novel design to optimize the optical performances of parabolic trough collector using Taguchi, ANOVA and grey relational analysis methods. Renew Energy2023; 216: 119105.
22.
KazemianAParcheforoshASalariA, et al.Optimization of a novel photovoltaic thermal module in series with a solar collector using Taguchi based grey relational analysis. Sol Energy2021; 215: 492–507.
23.
ChenGRLiaoTWHsiehCC, et al.Using the Taguchi method and grey relational analysis to optimize the parameter design of flat-plate collectors with nanofluids, and phase change materials in an integrated solar water heating system. Energy Convers Manag X2025; 26: 100910.
24.
LiuD-KHsiehC-CLiaoT-W, et al.The use of the taguchi method with grey relational analysis for nanofluid-phase change-optimized parameter design at a rooftop solar photovoltaic thermal composite module for small households. Sustainability2023; 15: 15163.
25.
MalanAKandasamyRK. Coupled optical and thermal analysis of large aperture parabolic trough solar collector. Int J Energy Res2020; 45: 4630–4651.
26.
BhogillaSSRama SreekanthPS. Assessing the influence of thermal energy storage on the performance of concentrating solar power plant. Energy Storage2021; 3: e207.
27.
NovasNFernández-GarcíaAManzano-agugliaroF. A simplified method to avoid shadows at parabolic-trough solar collectors facilities. MDPI Symmetry2020; 12: 278.
28.
ZubairMAwanABBaseerMA, et al.Optimization of parabolic trough based concentrated solar power plant for energy export from Saudi Arabia. Energy Rep2021; 7: 4540–4554.
29.
AitHOualiLMerrouniAA, et al.Optimization and techno-economic appraisal of parabolic trough solar power plant under different scenarios: a case study of Morocco. Energies2022; 15(22): 8485.
30.
AfodanyiDKSagnaKGuenganeH, et al.Thermodynamic solar power plant in Togo feasibility study for the construction of a thermodynamic solar power plant in Togo. Sustainable Energy2023; 11: 1–11. Epub ahead of print. DOI: 10.12691/rse-11-1-1.
31.
BhogillaSSRama SreekanthPS. Techno and economic assessment of dry cooling option for concentrated solar power (CSP) plant in the desert region. Mater Today Proc2023. DOI: 10.1016/j.matpr.2023.04.168. Epub ahead of print.
32.
AlamrMAGomaaMR. A review of parabolic trough collector (PTC): application and performance comparison. Int J Appl Sci Develop2022; 1: 24–34.
33.
SintaliISAbioyeAM. Effects of tilt angles on the thermal performance of a solar parabolic trough collector system. 2020; 6: 76–82.
34.
ErmanBPeterV. Aalborg universitet the use of Taguchi, ANOVA, and GRA methods to optimize CFD analyses of ventilation performance in buildings publication date. Build Env225: 109587. Epub ahead of print 2022. DOI: 10.1016/j.buildenv.2022.109587.
35.
JozićSBajićDCelentL. Application of compressed cold air cooling: achieving multiple performance characteristics in end milling process. J Clean Prod2015; 100: 325–332.
36.
ShahIJeonHSAliM, et al.Optimal parametric mixing analysis of active and passive micromixers using Taguchi method. Proc IME C J Mech Eng Sci2019; 233(5): 1292–1303.
37.
ArslanMXianHShahI, et al.Numerical parametric optimization of fluid flow profiles in membranes using the Taguchi method. Sci Rep2025; 15: 35902.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
