Aerodynamic design and evaluation of a ducted fan lift system for vertical takeoff and landing flying cars

Abstract

Urban air mobility is a relatively new concept that has been proposed in recent years as a means of transporting passengers and goods in urban areas. It encompasses a diverse range of Vertical TakeOff and Landing (VTOL) vehicles that function more like passenger-carrying drones for on-demand transportation. Among them, the car-like VTOL is advantageous due to its compact configuration, safe rotors, high user affinity, and technological fashion. These characteristics are frequently derived from the flying car’s Ducted Fan Lift System (DFLS). This study aims to develop a method for the rapid design and the evaluation of the aerodynamic performance of the DFLS, to support the preliminary scheme demonstration of the ducted fan flying car. The proposed method uses blade element theory to design the unducted fan and applies momentum theory to calculate the aerodynamic thrust of the DFLS. The DFLS of a 1:3 scale verifier for a flying car scheme was designed and evaluated using the proposed method and a numerical method, respectively. To validate the proposed method, a prototype of the scale DFLS was manufactured and tested, and the result was compared with those of the proposed theoretical method and the numerical method. This study demonstrates that while both the theoretical and numerical methods are capable of designing an unducted fan accurately, the theoretical method is simpler and faster. Compared to the DFLS test results, the theoretical method’s average difference is approximately 1.9%. When evaluating the DFLS, the accuracy of the numerical calculation is reduced, and the difference is greater than 30% at low power. The theoretical method presented in this paper can be used to improve the aerodynamic design and evaluation efficiency of the DFLS and to aid in the configuration evaluation of VTOLs equipped with ducted fans.

Keywords

Ducted fan design urban air mobility vertical takeoff and landing numerical calculation flying car

Get full access to this article

View all access options for this article.

References

Yoeli

. Ducted fan utility vehicles and other flying cars. In: 2002 Biennial International Powered Lift Conference & Exhibit, Williamsburg, Virginia, 5 November 2002–7 November 2002, pp. 1–6.

Straubinger

Rothfeld

Shamiyeh

, et al. An overview of current research and developments in urban air mobility–Setting the scene for UAM introduction. J Air Transport Manage 2020; 87(101852): 1–12.

Zhou

Zhao

Liu

. An evaluative review of the VTOL technologies for unmanned and manned aerial vehicles. Comput Commun 2020; 149: 356–369.

Jiang

Zhang

Huang

. CFD study of an annular-ducted fan lift system for VTOL aircraft. Aerospace 2015; 2: 555–580.

Ahn

Lee

. Performance prediction and design of a ducted fan system. In: AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Fort Lauderdale, Florida, 11 July 2004–14 July 2004, pp. 1–9.

Taylor

. Experimental investigation of the effects of some shroud design variables on the static thrust characteristics of a small-scale shrouded propeller submerged in a wing, Technical Report Archive & Image Library, 1958, Vol. 8, pp. 41–50.

Fan

N-J

Yang

J-W

. Numerical study on aerodynamic characteristics of ducted fan aircraft. J Beijing Insititute Technol 2010; 19: 19–24.

Pflimlin

J-M

Binetti

Souères

, et al. Modeling and attitude control analysis of a ducted-fan micro aerial vehicle. Control Eng Pract 2010; 18: 209–218.

Eriksson

Wedell

. Performance Estimation of a Ducted Fan UAV. Linköping University, Department of Electrical Engineering, 2006.

10.

Ruzicka

Meadowcroft

Strawn

. Discrete-blade, navier-stokes computational fluid dynamics analysis of ducted-fan flow. J Aircraft 2005; 42: 1109–1117.

11.

Zheng

Peng

, et al. Investigation of the aerodynamic characters of ducted fan system. Int J Aerospace Mech Eng 2012; 6(9): 2015–2018.

12.

Schenk

. The Introduction of PropCalc, 2007, pp. 1–6.

13.

Grahame

. Aerodynamic effects of lift-jet and lift-fan inlets in transition flight. J Aircraft 1969; 6: 150–155.

14.

Platt

RJJ

Static tests of a shrouded and an unshrouded propeller. Technical Report Archive & Image Library, No. L7H25, 1948, pp. 1–40.

15.

Sheng

Zhao

. Numerical investigations of fan-in-wing aerodynamic performance with active flow control. In 34th AIAA Applied Aerodynamics Conference, Washington, DC, 13–17 June 2016, pp. 1–14.

16.

Xu He-yong

YZy

. Numerical simulation and comparison of aerodynamic characteristics of ducted and isolated propellers. J Aerospace Power 2011; 26(12): 6.

17.

Fenwick

Allen

. Development and validation of sliding grid technology for time-domain aeroservoelastic simulations. In: 23rd AIAA Applied Aerodynamics Conference, Toronto, Canada, 6 June 2005–9 June 2005. American Institute of Aeronautics and Astronautics Inc. AIAA, United States, 2005, pp. 1–16 [Conference Organiser: AIAA Other identifier: (AIAA) 2005-4844].