A pathway towards healthy and naturally ventilated indoor built environment through phase change material and insulation techniques for office buildings in India

Abstract

The thermal comfort of occupants is a necessary requirement for any building. The present pandemic demands us to opt for natural ventilation over air-conditioned spaces to reduce the spread of the infection. This work aims to prevent air-conditioner usage in a commercial building in India during daytime office hours while simultaneously enhancing the thermal comfort of the building occupants through natural ventilation/Phase Change Material (PCM)/insulation techniques. Four building configurations, such as Building A (conventional building with no PCM and no insulation), Building B (building-integrated with PCM), Building C (building-integrated with insulation) and Building D (building-integrated with PCM and insulation) were analysed for various locations using DesignBuilder software. From the results, it is understood that insulation integration is recommended for locations with average nighttime temperatures greater than 27°C, while PCM integration is recommended for locations with an average nighttime temperature less than 27°C during the summer season. Also, nighttime cooling of the building through an air-conditioner is necessary for all locations during summer to maintain adequate thermal comfort with natural ventilation in the daytime. Finally, an appropriate PCM/insulation technique is recommended for an office building located in each location that falls under each type of climate. Hence, the selection of PCM/insulation technique is to be made based on the specific site conditions.

Keywords

Natural ventilation Adaptive thermal comfort Indoor built environment Phase change materials Insulation techniques Commercial buildings

Get full access to this article

View all access options for this article.

References

Hasegawa

Park

Fujimori

, et al. Quantifying the economic impact of changes in energy demand for space heating and cooling systems under varying climatic scenarios. Palgrave Commun 2016; 2: 16013.

Inglesi-Lotz

Dogan

. The role of renewable versus non-renewable energy to the level of CO2 emissions a panel analysis of sub- Saharan Africa's Βig 10 electricity generators. Renew Energy 2018; 123: 36–43.

Arumugam

Ramalingam

Bhaganagar

. A pathway towards sustainable development of small capacity horizontal axis wind turbines – Identification of influencing design parameters & their role on performance analysis. Sustain Energy Technol Assessments 2021 Apr 1; 44: 101019.

Samuel

DGL

Nagendra

SMS

Maiya

. Passive alternatives to mechanical air conditioning of building: A review. Building Environ 2013; 66: 54–64.

Kwok

Rajkovich

. Addressing climate change in comfort standards. Building Environ 2010; 45(1): 18–22.

Awasthi

. Proper ventilation in indoor spaces can help lower Covid-10 viral load: Study. The Hindu 2020 Aug 29.

Oropeza-Perez

Østergaard

. Energy saving potential of utilizing natural ventilation under warm conditions - A case study of Mexico. Appl Energy 2014; 130: 20–32.

Tyagi

Kaushik

Tyagi

, et al. Development of phase change materials based microencapsulated technology for buildings: A review. Renew Sustainable Energy Rev 2011; 15(2): 1373–1391.

Ismail

KAR

Castro

JNC

. PCM thermal insulation in buildings. Int J Energy Res 1997; 21(14): 1281–1296.

10.

Abdelrahman

Ahmad

. Cost-effective use of thermal insulation in hot climates. Building Environ 1991; 26(2): 189–194.

11.

Al-Homoud

DMS

. Performance characteristics and practical applications of common building thermal insulation materials. Building Environ 2005; 40(3): 353–366.

12.

Emmerich

Polidoro

Axley

. Impact of adaptive thermal comfort on climatic suitability of natural ventilation in office buildings. Energy and Buildings 2011; 43(9): 2101–2107.

13.

Álvarez

Cabeza

Ruiz-Pardo

, et al. Building integration of PCM for natural cooling of buildings. Appl Energy 2013; 109: 514–522.

14.

Woodward

. You’re most likely to catch the coronavirus in a poorly ventilated space. In: That makes offices very risky. Business Insider India, 2020.

15.

Coronavirus Lingers in Air of Crowded, Non-ventilated Rooms; More Evidence of Aerosol Spread. The Week. 2020.

16.

Aroul Raj V

Velraj

Haghighat

. The contribution of dry indoor built environment on the spread of Coronavirus: Data from various Indian states. Sustainable Cities Society 2020; 62: 102371.

17.

Jones

West

. Natural ventilation and collaborative design. ASHRAE J 2001; 43(11): 46–50.

18.

Hasnain

. Review on sustainable thermal energy storage technologies, part I: Heat storage materials and techniques. Energy Convers Management 1998; 39(11): 1127–1138.

19.

Pomianowski

Heiselberg

Zhang

. Review of thermal energy storage technologies based on PCM application in buildings. Energy and Buildings 2013; 67: 56–69.

20.

Jayalath

Aye

Mendis

, et al. Effects of phase change material roof layers on thermal performance of a residential building in Melbourne and Sydney. Energy and Buildings 2016; 121: 152–158.

21.

Aditya

Mahlia

TMI

Rismanchi

, et al. A review on insulation materials for energy conservation in buildings. Renew Sustainable Energy Rev 2017; 73: 1352–1365.

22.

Tettey

UYA

Dodoo

Gustavsson

. Effects of different insulation materials on primary energy and CO2 emission of a multi-storey residential building. Energy and Buildings 2014; 82: 369–377.

23.

SP 41 . Handbook on Functional Requirements of Buildings (Other than Industrial Buildings). Bureau of Indian standards, 19871988.

24.

Energy Conservation Building Code User Guide. 2009.

25.

ISO 7730:2005(E)

Ergonomics of the Thermal Environment - Analytical Determination and Interpretation of Thermal Comfort Using Calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria. 2005.

26.

Tardieu

Behzadi

Chen

JJJ

, et al. Computer simulation and experimental measurements for an experimental PCM-impregnated office building. In: Proceedings of building simulation, Sydney, 14–16 November 2011.