The effects of porous wall as a novel flame stabilization method on flame characteristics in a premixed burner for CH 4 /air mixture by numerical simulation

Abstract

In the present investigation, the effects of inner diameter and length of porous wall on flame stability limits, temperature distribution, methane conversion, and pressure drop in a premixed burner are numerically analyzed. The governing equations are solved by the control volume method, considering Re-Normalization Group k-ɛ for turbulence modeling and eddy dissipation concept for turbulence–chemistry interaction modeling. The simulations are performed for various porous walls with the inner diameter of 30, 40, and 50 mm and the length of 22, 44, and 66 mm. The results demonstrate that the increase in inner diameter of porous wall causes an increase in the lower flame stability limit and a decrease in the upper flame stability limit, gas and solid temperatures, pressure drop, and methane conversion. Also, the maximum solid and gas temperatures in the porous wall and methane conversion are related to the porous wall with 44 mm length. Furthermore, the methane conversion and pressure drop increase with the rise in the equivalence ratio. Finally, it can be said that the change in inner diameter of porous wall is more important than the length of porous wall in the studied phenomena.

Keywords

Premixed burner porous wall numerical simulation methane conversion flame stability limits

Get full access to this article

View all access options for this article.

References

Lackner

Palotas

Winter

. Combustion: from basics to applications, Hoboken: John Wiley & Sons, 2013.

Newman

McKillop

. The final energy crisis, London: Pluto Press, 2008.

Turns

. An introduction to combustion, New York: McGraw-Hill, 1996.

Baukal

Jr . Industrial combustion testing, Boca Raton: CRC Press, 2010.

Richards GA, Straub DL and Robey EH. Dynamic response of a premix fuel injector. In: Proceeding of American Society of Mechanical Engineers. New York: ASME, pp.V002T02A003.

Park

Chung

Kim

, et al. A study on the design of recuperative burner. Int J Energy Res 1998; 22: 209–220.

Bagheri

Hosseini

Wahid

. Effects of bluff body shape on the flame stability in premixed micro-combustion of hydrogen–air mixture. Appl Therm Eng 2014; 67: 266–272.

Hosseini

Wahid

. Investigation of bluff-body micro-flameless combustion. Energy Convers Manag 2014; 88: 120–128.

Ding

Zhang

, et al. Flow induced motion and energy harvesting of bluff bodies with different cross sections. Energy Convers Manag 2015; 91: 416–426.

10.

Kun-Balog

Sztankó

Józsa

. Pollutant emission of gaseous and liquid aqueous bioethanol combustion in swirl burners. Energy Convers Manag 2017; 149: 896–903.

11.

Yang

Hung

, et al. Influence of swirl ratio on fuel distribution and cyclic variation under flash boiling conditions in a spark ignition direct injection gasoline engine. Energy Convers Manag 2017; 138: 565–576.

12.

Lewis

Marsh

Sevcenco

, et al. The effect of variable fuel composition on a swirl-stabilised producer gas combustor. Energy Convers Manag 2012; 64: 52–61.

13.

Shirsat

Gupta

. Extinction, discharge, and thrust characteristics of methanol fueled meso-scale thrust chamber. Appl Energy 2013; 103: 375–392.

14.

Mujeebu

Abdullah

Bakar

, et al. Applications of porous media combustion technology – a review. Appl Energy 2009; 86: 1365–1375.

15.

Ghorashi

Hashemi

, et al. Experimental study on pollutant emissions in the novel combined porous-free flame burner. Energy 2018; 162: 517–525.

16.

Hashemi

. Numerical study of the flame stability of premixed methane–air combustion in a combined porous-free flame burner. Proc IMechE, Part A: J Power and Energy 2018; 233: 530–544.

17.

Takeno

Sato

. An excess enthalpy flame theory. Combust Sci Technol 1979; 20: 73–84.

18.

Brenner

Pickenäcker

, et al. Numerical and experimental investigation of matrix-stabilized methane/air combustion in porous inert media. Combust Flame 2000; 123: 201–213.

19.

Tseng

C-J

. Effects of hydrogen addition on methane combustion in a porous medium burner. Int J Hydrogen Energy 2002; 27: 699–707.

20.

Mishra

Steven

Nemoda

, et al. Heat transfer analysis of a two-dimensional rectangular porous radiant burner. Int Commun Heat Mass Transf 2006; 33: 467–474.

21.

Dhamrat

Ellzey

. Numerical and experimental study of the conversion of methane to hydrogen in a porous media reactor. Combust Flame 2006; 144: 698–709.

22.

Xie

M-Z

Shi

J-R

Deng

Y-B

, et al. Experimental and numerical investigation on performance of a porous medium burner with reciprocating flow. Fuel 2009; 88: 206–213.

23.

Liu

Dong

B-W

, et al. Parametric investigations of premixed methane–air combustion in two-section porous media by numerical simulation. Fuel 2010; 89: 1736–1742.

24.

Zhou

Xie

M-Z

Luo

. Numerical study of heat transfer and combustion in IC engine with a porous media piston region. Appl Therm Eng 2014; 65: 597–604.

25.

Panigrahy

Mishra

, et al. Numerical and experimental analyses of LPG (liquefied petroleum gas) combustion in a domestic cooking stove with a porous radiant burner. Energy 2016; 95: 404–414.

26.

Hashemi

Nikfar

. The effect of inlet condition on the combustion in a porous–free flame burner. J Porous Media 2017; 20: 823–839.

27.

Hashemi

. Numerical investigation of the flame stabilization in a divergent porous media burner. Proc IMechE, Part A: J Power and Energy 2017; 231: 173–181.

28.

Liu

Fan

Yao

, et al. A numerical investigation on the effect of wall thermal conductivity on flame stability and combustion efficiency in a mesoscale channel filled with fibrous porous medium. Appl Therm Eng 2016; 101: 239–246.

29.

Hashemi

. Flame stability analysis of the premixed methane-air combustion in a two-layer porous media burner by numerical simulation. Fuel 2017; 202: 56–65.

30.

Dai

Zhao

Lin

, et al. Premixed combustion of low-concentration coal mine methane with water vapor addition in a two-section porous media burner. Fuel 2018; 213: 72–82.

31.

Chen

Xia

Y-F

B-W

, et al. Flame front inclination instability in the porous media combustion with inhomogeneous preheating temperature distribution. Appl Therm Eng 2018; 128: 1520–1530.

32.

Hashemi

Nikfar

Ghorashi

. Numerical study of the effect of thermal boundary conditions and porous medium properties on the combustion in a combined porous-free flame burner. Proc IMechE, Part A: J Power and Energy 2018; 232: 799–811.

33.

Trimis D. Stabilized combustion in porous media-applications of the porous burner technology in energy-and heat-engineering. In: Fluids 2000 Conference and Exhibit, Denver, CO, 19–22 June 2000, paper no 2298.

34.

Yan

Zhang

, et al. Numerical investigation on combustion characteristics of methane/air in a micro-combustor with a regular triangular pyramid bluff body. Int J Hydrogen Energy 2018; 43: 7581–7590.

35.

Donoso-García

Henríquez-Vargas

. Numerical study of turbulent porous media combustion coupled with thermoelectric generation in a recuperative reactor. Energy 2015; 93: 1189–1198.

36.

Dobrego

Gnesdilov

Kozlov

, et al. Numerical investigation of the new regenerator–recuperator scheme of VOC oxidizer. Int J Heat Mass Transf 2005; 48: 4695–4703.

37.

Younis

Viskanta

. Experimental determination of the volumetric heat transfer coefficient between stream of air and ceramic foam. Int J Heat Mass Transf 1993; 36: 1425–1434.

38.

Mohamad A. Combustion in porous media: fundamentals and applications. In: Ingham DB and Pop I (eds) Transport phenomena in porous media III. Amsterdam: Elsevier, 2005, pp.287–304.

39.

Patankar SV and Spalding DB. A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows. In Patankar SV, Pollard A, Singhal AK, et al. (eds) Numerical prediction of flow, heat transfer, turbulence and combustion. Amsterdam: Elsevier, 1983, pp.54–73.

40.

Smith GP, Golden DM, Frenklach M, et al. GRI 3.0 mechanism. Gas Research Institute, http://combustion.berkeley.edu/gri-mech/ (1999).

41.

Yang

Pope

. An investigation of the accuracy of manifold methods and splitting schemes in the computational implementation of combustion chemistry. Combust Flame 1998; 112: 16–32.

42.

Zarvandi

Tabejamaat

Baigmohammadi

. Numerical study of the effects of heat transfer methods on CH4/(CH4 + H2)-AIR pre-mixed flames in a micro-stepped tube. Energy 2012; 44: 396–400.

43.

Barra

Ellzey

. Heat recirculation and heat transfer in porous burners. Combust Flame 2004; 137: 230–241.

44.

Chen

Y-C

Peters

Schneemann

, et al. The detailed flame structure of highly stretched turbulent premixed methane-air flames. Combust Flame 1996; 107: 223–244, IN1–IN2.

45.

Bidi

Nobari

Avval

. A numerical investigation of turbulent premixed methane-air combustion in a cylindrical chamber. Combust Sci Technol 2007; 179: 1841–1865.

46.

Bidi

Hosseini

Nobari

. Numerical analysis of methane–air combustion considering radiation effect. Energy Convers Manag 2008; 49: 3634–3647.

47.

Yan

Wang

Pan

, et al. Numerical study of effect of wall parameters on catalytic combustion characteristics of CH4/air in a heat recirculation micro-combustor. Energy Convers Manag 2016; 118: 474–484.

48.

Zhang

Zhu

Yan

, et al. Numerical investigation on the combustion characteristics of methane/air in a micro-combustor with a hollow hemispherical bluff body. Energy Convers Manag 2015; 94: 293–299.

49.

Gao

Feng

, et al. Premixed combustion in a porous burner with different fuels. Combust Sci Technol 2015; 187: 489–504.

50.

Dehaj

Ebrahimi

Shams

, et al. Experimental analysis of natural gas combustion in a porous burner. Exp Therm Fluid Sci 2017; 84: 134–143.