Abstract
The method of moments offers an efficient way to preserve the essence of particle size distribution, which is required in many engineering problems such as modelling wet-steam flows. However, in the context of the finite volume method, high-order transport algorithms are not guaranteed to preserve the moment space, resulting in so-called ‘non-realisable’ moment sets. Non-realisability poses a serious obstacle to the quadrature-based moment methods, since no size distribution can be identified for a non-realisable moment set and the moment-transport equations cannot be closed. On the other hand, in the case of conventional method of moments, closures to the moment-transport equations are directly calculated from the moments themselves; as such, non-realisability may not be a problem. This article describes an investigation of the effects of the non-realisability problem on the flow conditions and moment distributions obtained by the conventional method of moments through several one-dimensional test cases involving systems that exhibited similar characteristics to low-pressure wet-steam flows. The predictions of pressures and mean droplet sizes were not considerably disturbed due to non-realisability in any of the test cases. However, in one case that was characterised by strong temporal and spatial gradients, non-realisability did undermine the accuracy of the predictions of measures for the underlying size distributions, including the standard deviation and skewness.
Get full access to this article
View all access options for this article.
