Meanline design of a 250 kW radial inflow turbine stage using R245fa working fluid and waste heat from a refinery process

Abstract

The purpose of this research is to develop a meanline simulation model that provides a good starting point for the detail design of radial inflow turbine stages and then demonstrate the application of the model to the design of a turbine stage. This study begins with a thermodynamic design of an organic Rankine cycle power plant with the working fluid R245fa utilizing waste heat from a refinery process. The thermodynamic cycle analysis gives the design point of a turbine expander suitable for generating a net power of 250 kW_e in the power plant. Empirical data and correlations, based on the performance measurements of a large number of turbines, from literature provide a base to determine both geometric and aerodynamic parameters of rotor blades and nozzle vanes. The efficiency of the designed turbine stage is estimated by using flow loss models for the rotor. Preliminary blade stress and modal analysis is also carried out. The numerical model is validated by comparing simulation results with published data of a gas turbine. The designed radial inflow turbine has a rotor inlet diameter of 37.2 cm and a rotational speed of 7000 r/min with a total-to-static efficiency of 87.3% predicted.

Keywords

Meanline design radial inflow turbine organic Rankine cycle industrial waste heat power generation

Get full access to this article

View all access options for this article.

References

U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy. Waste heat recovery: Technology and opportunities in U.S. Industry, 2008.

Verschoor

Brouwer

. Description of the SMR cycle, which combines fluid elements of steam and organic Rankine cycles. Energy 1995; 20: 295–303.

Yamamoto

Furuhata

Arai

. Design and testing of the organic Rankine cycle. Energy 2001; 26: 239–251.

Saitoh

Yamada

Wakashima

. Solar Rankine cycle system using scroll expander. J Environ Eng 2007; 2: 708–719.

Quoilin

Lemort

Lebrun

. Experimental study and modelling of an organic Rankine cycle using scroll expander. Appl Energy 2010; 87: 1260–1268.

ElectraTherm. Power + Generators TM in the Field, https://electratherm.com/case_studies/ (accessed 6 July 2015).

Marcuccilli F and Zouaghi S. Radial inflow turbines for Kalina and organic Rankine cycles. In: Proceedings European geothermal congress, Unterhaching, Germany, 2007.

Kang

. Design and experimental study of ORC (organic Rankine cycle) and radial turbine using R245fa working fluid. Energy 2012; 41: 514–524.

Pei

. Construction and dynamic test of a small-scale organic rankine cycle. Energy 2011; 36: 3215–3223.

10.

Chen

Baines

. The aerodynamic loading of radial and mixed-flow turbines. Int J Mech Sci 1994; 36: 63–79.

11.

Jones

. Design and test of a small, high pressure ratio radial turbine. J Turbomach 1996; 118: 362–370.

12.

Doran

Spence

Artt

. Experimental performance evaluation of a 99.0 mm radial inflow nozzled turbine with varying shroud profiles. J Power Energy 2001; 215: 267–280.

13.

Ventura

Jacobs

Rowlands

. Preliminary design and performance estimation of radial inflow turbines: An automated approach. Trans ASME J Fluids Eng 2012; 134: 031102–031102.

14.

Fiaschi

Manfrida

Maraschiello

. Thermo-fluid dynamics preliminary design of turbo-expanders for ORC cycles. Appl Energy 2012; 97: 601–608.

15.

Sauret

Rowlands

. Candidate radial-inflow turbines and high-density working fluids for geothermal power systems. Energy 2011; 36: 4460–4467.

16.

Jung

Krumdieck

Vranjes

. Feasibility assessment of refinery waste heat-to-power conversion using an organic Rankine cycle. Energy Convers Manage 2014; 77: 396–407.

17.

Klein

Alvarado

. Engineering equation solver. F-Chart Software 2009.

18.

Moustapha

Zelesky

Baines

. Axial and radial turbines, Concepts NREC, 2006.

19.

Balje

. Turbomachines: A guide to design, selection, and theory, New York: John Wiley & Sons, 1981.

20.

Gassman

. Computer program for design analysis of radial-inflow turbines, Washington, DC: NASA, 1976.

21.

Simpson A, Spence S and Watterson J. Numerical and experimental study of the performance effects of varying vaneless space and vane solidity in radial inflow turbine stators. In: Proceedings of ASME turbo expo: Power for land, sea and air, Berlin, Germany, 2008.

22.

Futral

Wasserbauer

. Off-design performance prediction with experimental verification for a radial-inflow turbine, Washington, DC: NASA, 1965.

23.

Wasserbauer

Glassman

. FORTRAN program for predicting the off-design performance of radial inflow turbines, Washington, DC: NASA, 1975.

24.

Spraker WA. Contour clearance losses in radial inflow turbines for turbochargers. ASME 1987: 87-ICE-52.

25.

Ghosh

Sahoo

Sarangi

. Mathematical analysis for off-design performance of cyogenic turboexpander. Trans ASME J Fluids Eng 2011; 133: 031001–031001.

26.

Suhrmann JF, Peitsch D, Gugau M, et al. Validation and development of loss models for small size radial turbines. In: Proceedings of ASME turbo expo 2010: Power for land, sea and air, Glasgow, UK, 2010.

27.

Sauret E. Open design of high pressure ratio radial-inflow turbine for academic validation. In: Proceedings of the ASME 2012 international mechanical engineering congress & exposition (IMECE 2012), Houston, TX, USA, 2012, p. IMECE-88315.

28.

Aungier

. Turbine aerodynamics: Axial-flow and radial-inflow turbine design and analysis, New York: ASME, 2006.

29.

Marscher WD. Structural analysis: Stresses due to centrifugal, pressure and thermal loads in radial turbines. VKI Lecture Series, Radial Turbines. von Karman Institute for Fluid Dynamic, 1992.

30.

AZO Materials. Stainless Steel - Grade 410 (UNS S41000), www.azom.com/article.aspx?ArticleID=970 (accessed 2 December 2015).

31.

Blevins

. Formulas for natural frequency and mode shape, New York: van Nostrand Reinhold Company, 1979.