Sage Journals: Discover world-class research

Abstract

Casing treatment was applied to three blade geometries for axial flow pumps to investigate its influence on their hydraulic characteristics and the well-known typical head curve instability. The geometries were a conventional blade with a radial leading edge and two blades with 45° forward and backward sweeps, respectively. The measurements were performed to show whether the effect of casing treatment does always remove the head curve instability and whether its smoothing effect on the head curve exists also in case of forward and backward sweeps, both of which geometries are known to differ considerably in stall inception. The head curves were measured in a standard way in cavitation-free flow, and additionally the pump head as function of net pressure suction head was measured to record the cavitational behaviour of the different set-ups. It was found that casing treatment strongly reduces the head curve instability though it does not always fully remove it and seems to have no distinct effect on the cavitation characteristics. All three impeller geometries are characterized by critical stall region near the tip.

Keywords

axial flow pumps rotating stall head curve instability blade sweep cavitation casing treatment

Get full access to this article

View all access options for this article.

References

Greitzer

E. M.

The stability of pumping systems. J. Fluids Eng., 1981, 103, 193–242.

Day

I. J.

Stall inception in axial flow compressors. ASME J. Turbomach., 1993, 115, 1–9.

Takata

Tsukuda

Stall margin improvement by casing treament –its mechanics and effectiveness. ASME J. Eng. Power, 1977, 99, 121–133.

Cumpsty, N.A. Part-circumference casing treatment and the effect on compressor stall, ASME paper no. 89-GT-312, The American Society for Mechanical Engineers, New York, NY, 1989.

Kurokawa

Saha

S. L.

Matsui

Imamura

An innovative device to suppress performance-curve-instability in a mixed-flow pump. J. Fluids Eng., 2000, 122, 592–598.

Goltz, I. Entstehung und Unterdrückung der Kennlinieninstabilität einer Axialpumpe, Dissertation, Uni Braunschweig, Mitt des Pfleiderer-Instituts für Strömungsmaschinen, 2004.

Forstner, M., Kuhn, K., Glas, W., and Jaberg, H. The flow field of pump impellers with forward and backward sweep. In: Proceedings of the 4th European conference on turbomachinery, fluid dynamics, and thermodynamics, Florence, Italy, 20–23 March 2001, pp.577–588.

Jaberg, H. and Forstner, M. 2003, About the onset of partload instability of swept and unswept axial pump blades. In: Proceedings of the conference on model fluid flow technologies (CMFF 03), Budapest, Hungary, 3–6 September 2003.

Greitzer

E. M.

Nikkanen

J. P.

Haddad

D. H.

Joslyn

H. D.

Mazzawy

R. S.

A fundamental criterion for the application of rotor casing treatment. J. Fluids Eng., 1979, 101, 237–243.

10.

Smith

L. M.

Yeh

Sweep and dehydral effects in axial-flow turbomachinery. J. Basic Eng., 1963, 85, 401–416.

11.

Kuhn, K. Experimentelle Untersuchung einer Axialpumpe und Rohrturbine mit gepfeilten Schaufeln, Dissertation, Technische Universität Graz, Institut für Hydraulische Strömungsmaschinen, 2000.

12.

Penninger, G. Schwingungen und mechanische Belastungen von Axialpumpenschaufeln mit und ohne Pfeilung im kavitierenden off-design Betrieb, Dissertation, Technische Universität Graz, Institut für Hydraulische Strömungsmaschinen, 2004.

Modifying unstable headcurves of swept and unswept pump bladings by means of casing treatment

Abstract

Keywords

Get full access to this article

References