Evaluation of setting time and compressive strength of a new bone cement precursor powder containing Mg–Na–Ca

Abstract

Taking the advantage of a novel magnesium phosphate precursor containing Na and Ca, the cementation rate of the cement, including only Mg/Mg–Na–Ca, was studied. Besides, two effective parameters, that is, calcination temperature, 650 °C and 800 °C, and powder-to-cement liquid ratio, 1 and 1.5 g/mL, were assessed. X-ray diffraction, scanning electron microscopy, ion chromatography, particle size analyser, Vicat needle and compression test were used to characterize the powders and obtained cements. The sample containing Mg–Na–Ca, calcined at 800 °C with powder-to-cement liquid ratio of 1.5, obtained the highest compressive strength, 20 MPa, but set fast. To control the kinetics of cementation, the powder containing Mg–Na–Ca calcined at 950 °C with powder-to-cement liquid ratio of 1.5 and 2 g/mL was assessed and the one with 2 g/mL set in 9 min possessing 22 MPa compressive strength was selected as optimal condition to be used as a candidate, injectable bone cement.