The clinical practice shows that the loosening of acetabular cups is more frequent than stem loosening. With standard cups, the incidence of dislocation failure is highest in the first year after arthroplasty implantation. The aim of the study was to quantitatively evaluate the implant-bone stability of a cementless acetabular cup prosthesis by using a device based on resonance frequency analysis. The evaluation of this device was done by finite element analysis and in vitro experiments. It was shown that not all the resonance frequencies can be measured by our device. The resonance frequencies vary within the range of 500–3000 Hz. The proposed power spectrum measurement gives the information about the absolute stiffness of the press-fit implant.
MeredithNBookKFribergB. Resonance frequency measurements of implant stability in vivo. A cross-sectional and longitudinal study of resonance frequency measurements on implants in edentulous and partially dentate maxilla. Clin Oral Implants Res1997; 8: 226–233.
2.
ValderramaPOatesTWJonesAA. Evaluation of two different resonance frequency devices to detect implant stability: clinical trial. J Periodontol2007; 78: 262–272.
3.
HuwilerMAPjeturssonBEBosshardtDD. Resonance frequency analysis in relation to jawbone characteristics and during early healing of implant installation. Clin Oral Implants Res2007; 18: 275–280.
4.
MeredithNAlleneDCawleyP. Quantitative determination of stability of implant-tissue interface using resonance frequency analysis. Clin Oral Implants Res1996; 7: 261–267.
5.
Osstell™ user’s manual. Göteborg: Integration Diagnostics AB.
6.
Osstell™ mentor user’s manuals. Göteborg: Integration Diagnostics AB.
7.
SjöströmMLundgrenSNilsonH. Monitoring of implant stability in grafted bone using resonance frequency analysis. A clinical study from placement to 6 months of loading. Int J Oral Maxillofac Surg2004; 34: 45–51.
8.
LachmannSJägerBAxmannD. Resonance frequency analysis and damping capacity assessment. Part I: in vitro study on measurement reliability and method of comparison in determination of primary dental implant stability. Clin Oral Implants Res2006; 17: 75–79.
9.
LachmannSLavalJYJägerB. Resonance frequency analysis and damping capacity assessment. Part II: peri-implant bone loss follow-up. An in vitro study with Periotest and Osstell instruments. Clin Oral Implants Res2006; 17: 80–84.
10.
Al-NawasBGroetzKAGoetzH. Comparative histomorphometry and resonance frequency analysis of implants with moderately rough surfaces in loaded animal model. Clin Oral Implants Res2008; 19: 1–8.
11.
VariniEBialoblocka-JuszczykELannoccaM. Assessment of implant stability of cementless hip prostheses through frequency response function of stem bone system. Sens Actuators A Phys2010; 163: 526–532.
12.
CristofoliniLVariniEPelgreffiI. Device to measure intra-operatively primary stability of cementless hip stems. Med Eng Phys2006; 28: 475–482.
13.
PastravLCDevosJVan der PerreG. Finite element analysis of vibrational behavior of intra-operatively manufactured prosthesis–femur system. Med Eng Phys2009; 31: 489–494.
14.
PastravLCJaecquesSJonkersI. In vivo evaluation of vibration analysis technique for per-operative monitoring of fixation of hip prostheses. J Orthop Surg Res2009; 4: 1–10.
15.
RiegerJSJaegerSSchuldC. Vibrational technique for diagnosing loosened total hip endoprostheses: experimental sawbone study. Med Eng Phys2013; 35: 329–337.
16.
RutherCNierathHEwaldH. Investigation of acoustic-mechanical method to detect implant loosening. Med Eng Phys2013; 35: 1669–1675.
17.
YamadaHYoshiharaYHenmiO. Cementless total hip replacement: past, present and future. J Ortop Sci2009; 14: 228–241.
18.
HsuJ-TChangCHHuangH. Number of screws, bone quality, and friction coefficient affect acetabular cup stability. Med Eng Phys2007; 29: 1089–1095.
19.
HernigouPRatteLRoubineauF. Risk of dislocation after total hip arthroplasty for fractures is decreased with retentive cups. Int Orthop2013; 37: 1219–1223.
20.
KluessDMartinHMittelmeierW. Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement. Med Eng Phys. 2007; 29: 465–471.
21.
HothanAHuberGWeissC. Deformation characteristics and eigenfrequencies of press-fit acetabular cups. Clin Biomech2011; 26: 46–51.
22.
NeugebauerRWernerMVoigtC. Experimental modal analysis on fresh-frozen human hemipelvic bones employing a 3D laser vibrometer for the purpose of modal parameter identification. J Biomech2011; 44: 1610–1613.
