This paper presents a design approach for large passenger aircraft nacelles. It describes nacelle functions, configurations, and major components. Design criteria for particular components of the nacelle are presented. Typical materials used for structure build including composites are elaborated. Certification requirements are shown. The paper presents challenges for nacelle design and build, including weight, aerodynamic smoothness, nacelle integration, and cost.
StalewskiWŻółtakJ. The preliminary design of the air-intake system and the nacelle in the small aircraft-engine integration process. Aircraft Eng Aerosp Technol2014; 86: 250–258.
5.
ZdębskiS. Review of structural solutions in regard to lightning Strike protection of composite structures. Transac Inst Aviat2016; 243: 40–52.
6.
IwaniukAWiśniowskiWŻółtakJ. Multi-disciplinary optimization approach for a light turboprop aircraft-engine integration and improvement. Aircraft Eng Aerosp Technol2016; 88: 348–355.
7.
Inagaki I, Takechi T, Shirai Y, et al. Application and features of titanium for the aerospace industry. Nnippon Steel & Sumitomo Metal, Technical report. Report no. 106, July 2014.
FAA Regulations, Part 25:2016.Transport category airplanes; Part 33:2016.Aircraft Engines.
10.
Certification Specification for Large Aeroplanes CS-25. EASA paper 2007/010/R, 2007.
11.
Certification Specification and Acceptable Means of Compliance for Engines CS-E. EASA paper 2015/019/R, 2015.
12.
Verseux O and Sommerer Y. New Challenges for engine nacelle compartments pressure and thermal loads management with aircraft engine evolution. In: 29th congress of the international council of the aeronautical sciences, St. Petersburg, Russia, September 7–12 2014, pp.2897–2906. New York: ICAS.
