Effect of inlet conditions on compressor intermediate duct

Abstract

With further development of the turbofan aero-engine, the compressor intermediate duct can no longer be considered to merely perform the service function of transporting fluid from low-pressure component to high-pressure stage. Especially for the practical compressor intermediate duct with inclined uncambered struts, the high-curvature geometry, great internal pressure gradient, and strong three-dimensional effect make it extremely sensitive to the real inflow conditions, which would not be applicable to the previous research methods based on two-dimensional axisymmetric assumption. In this paper, numerical investigation was conducted about the influence of inflow conditions on a compact compressor intermediate duct with eight inclined struts and numerical approach was validated by comparison with experiment data and the computation accuracy of flow field details was studied by different grid settings. This study deeply explored the flow mechanism and aerodynamic performance about how the pre-swirl angle, inlet Mach number, and distorted total pressure effect of the compressor intermediate duct flow field. The results indicate: (1) for a compact compressor intermediate duct, the proper predication for the flow separation due to an aggressive geometry depends on the radial computing grid strongly, (2) the leeward side of the uncambered strut is extremely sensitive to the pre-swirl inflow, and the existence of backflow and exit non-uniformity is caused by the pre-swirl inflow, (3) the airflow adjacent to the casing wall is more sensitive to the inlet Mach number, whose increase will strengthen the exit non-uniformity and interaction between the strut wake and endwall boundary layer, and (4) the distorted inflow through compressor intermediate duct channel will be amplified because of the compact geometry.

Keywords

Compressor intermediate duct inlet condition inlet pre-swirl inlet Mach number inlet distortion

Get full access to this article

View all access options for this article.

References

Bailey

Britchford

Carrote

. Performance assessment of an annular S-shaped duct. J Turbomach 1997; 119: 149–155.

Xiang

Zhang

. Experimental investigation of inlet conditions’ effect on compressor intermediate casing flow field. Gas Turbine Exp Res 2011; 24: 15–19.

Karakasis MK, Naylor EM, Miller RJ, et al. The effect of an upstream compressor on a non-axisymmetric S-duct. In: Proceedings of ASME turbo expo 2010: power for land, sea and air, Glasgow, UK, 2010, paper no. GT2010-23404.

Hu SZ, Zhang YF, Zhang XF, et al. Influences of inlet swirl distributions on an inter-turbine duct-part I: casing swirl variation. In: ASME paper, British Columbia, Canada, 2011, paper no. IGTI GT2011-45554.

Zhang YF, Hu SZ, Zhang XF, et al. Influences of inlet swirl distributions on an inter-turbine duct-part II: hub swirl variation. In: ASME paper, British Columbia, Canada, 2011, paper no. IGTI GT2011-45555.

Dominy

Kirkham

. The influence of blade wakes on the performance of inter-turbine diffusers. J Turbomach 1996; 118: 347–352.

Tiziano G and Massimiliano MEA. Axial compressor intermediate duct design and optimization. In: 48th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conf, Honolulu, Hawaii, 2007, paper no. AIAA 2007-1868.

Zhang Guo-chen

Zhi-hui

Zhang

Bing-long . Numerical investigation of the aerodynamic performance of a twin-branch S-shaped duct. J Shenyang Aero Univ 2011; 28: 30–34.

Que Xiaobin

HAZS

. S-shaped compressor transition duct design based on wall pressure gradient control. Acta Aeronautica et Astronautica Sinica 2010; 31: 459–460.

10.

Bailey

. The aero dynamic performance of an annular s-shape duct, UK: Loughborough University, 1997.

11.

Gao

Feng

Chen

. Exploration about compressor intermediate duct design. Acta Aeronautica Et Astronautica Sinica 2012; 34: 1057–1063.

12.

Ortiz Duenas C, Miller RJ, Hodson HP, et al. Effect of length on compressor inter-stage duct performance. In: 2007 proceedings of the ASME turbo expo: power for land, sea and air, Montreal, Canada, 2007, paper no. GT2007-27752.