Understanding the impact of train run-throughs on railway switches using finite element analysis

Abstract

Train run-throughs on railway switches is a special issue, where a train passes through non-trailable railway switches in the wrong direction. This has the potential to cause severe damage and can lead to derailment. In order to understand the impact of train run-throughs on railway switches, a three-dimensional finite element model using explicit analysis has been developed. A detailed switch model has been developed that includes all key components: stretcher bars, supplementary drive and point operating equipment. The model was validated through a specifically designed experiment where switch run-throughs were emulated on a real switch; a good agreement was found between the experimental data and the model. The model has been used to make an assessment of the locking mechanisms. The forces in each component have been assessed and investigated, and the observations of failure location and component during run-through analysis are indicated. During a run-through, the supplementary drive rod and stretcher bar encounter a significant plastic deformation, and it is recommended that they should be redesigned in order to avoid plastic behaviour.

Keywords

Finite element analysis locking mechanism switch run-through turnout explicit analysis

Get full access to this article

View all access options for this article.

References

Durso FT, Gregg SE, Ferguson AN, et al. Human factors of run through switches in US rail operations, 2014.

Esveld

. Modern railway track, Delft University of Technology, 2001.

Track system requirements – RSSB. Railway Group Standard GC/RT5021, 2011.

Pålsson

Nielsen

JCO

. Track gauge optimisation of railway switches using a genetic algorithm. Veh Syst Dyn 2012; 50: 365–387.

Nicklisch

Kassa

Nielsen

et al.

Geometry and stiffness optimization for switches and crossings, and simulation of material degradation. Proc IMechE, Part F: J Rail and Rapid Transit 2010; 224: 279–292.

Wang

et al.

Optimization of rail profiles to improve vehicle running stability in switch panel of high-speed railway turnouts. Math Probl Eng 2017; 2017: 1–3.

Rusu

. Automation of railway switch and crossing inspection, PhD Thesis, University of Birmingham, 2015.

Hemida

Stewart

Roberts

. Finite element analysis of the lock stretcher bar in a railway switch. Int J Railw Technol 2015; 4: 53–71.

Hemida H, Stewart E and Roberts C. Finite element analysis methodology of a railway switch locked by a rail clamp point locking system. In: Proceedings of the 9th international conference on engineering computer technology, Naples, Italy, 2–5 September 2014.

10.

Qdecoder, Overview of configuration variables.

11.

Profillidis

. Railway management and engineering, 3rd ed. Aldershot: Ashgate, 2006.

12.

Schilke

Ahlstrm

Karlsson

. Low cycle fatigue and deformation behaviour of austenitic manganese steel in rolled and in as-cast conditions. Procedia Eng 2010; 2: 623–628.

13.

Schilke

Ahlstrm

Karlsson

. Low cycle fatigue and deformation behaviour of austenitic manganese steel in rolled and in as-cast conditions. Procedia Eng 2010; 2: 623–628.

14.

Hibbeler RC. Mechanics of materials. 6th ed. Prentice Hall PTR, 2004.