The primary objective of this study is to develop an adaptive neuro-fuzzy inference-based system (ANFIS) that assesses the ideal parameters and impact of the micro-electro-discharge machining (Micro-EDM) technique on surface roughness (SR). In this work multi-functional Inconel alloy specimens were machined using micro-elector-discharge machining (Micro-EDM) with zinc-coated copper electrodes in a graphite nano abrasive submersion medium. An ANFIS and Taguchi design of experiments (DOE) was employed to evaluate the Micro-EDM method. The study utilized Taguchi's L9 mixed orthogonal arrays (OA) to consider three process variables, namely open voltage (V), capacitance (C), and powder concentration (CP). ANOVA analysis was conducted to identify important process variables and evaluate their influence on surface properties. The experimental results showed that all approaches were effective in representing the process. Based on the results of the response surface methodology (RSM) and ANFIS predictions, the correlation coefficients (R2) of the experimental roughness were 0.995649 and the root mean square error (RMSE) value was 1.01226e-06, respectively. The results obtained indicate a strong alignment between the predicted and experimental values, effectively fulfilling the proposed objective. These findings hold significant potential for practical applications in the Micro-EDM industry, particularly in the machining of Inconel alloy.
SivaprakasamPHariharanP. Surface characteristics of nano powder mixed micro-wire electrical discharge machining on Inconel alloy. Mater Today Proc2021 Jan 1; 38: 494–498.
2.
PhateMBendaleAToneyS,et al.Prediction and optimization of tool wear rate during electric discharge machining of Al/Cu/Ni alloy using adaptive neuro-fuzzy inference system. Heliyon2020 Oct 1; 6: e05308.
3.
GoyalASharmaDBhowmickA,et al.Experimental investigation for minimizing circularity and surface roughness under nano graphene mixed dielectric EDM exercising fuzzy-ANFIS approach. Int J Interact Des Manuf (IJIDeM)2022 Sep; 16: 1135–1154.
4.
SharmaDBhowmickAGoyalA. Enhancing EDM performance characteristics of Inconel 625 superalloy using response surface methodology and ANFIS integrated approach. CIRP J Manuf Sci Technol2022 May 1; 37: 155–173.
5.
GoyalASharmaDBhowmickA,et al.Multi-objective optimization and characterization of cylindricity and material removal rate in nanographene mixed dielectric EDM using ANFIS and MOSOA. Sādhanā2022 Jul 12; 47: 139.
6.
PouraslHHJavidaniMKhojastehnezhadVM,et al.The performance prediction of electrical discharge machining of AISI D6 tool steel using ANN and ANFIS techniques: a comparative study. Crystals (Basel)2022 Mar 2; 12: 343.
7.
MohamedRTanKTRamliKN,et al.A hybrid micro-EDM surface roughness optimization based on ANFIS and regression techniques. J Adv Res Mater Sci. Eng2021; 10: 8–17.
8.
OzkavakHVSofuMMDumanB,et al.Estimating surface roughness for different EDM processing parameters on Inconel 718 using GEP and ANN. CIRP J Manuf Sci Technol2021 May 1; 33: 306–314.
9.
SinghSPatelBUpadhyayRK,et al.Improvement of process performance of powder mixed electrical discharge machining by optimisation-A review. Adv Mater Process Technol2022 Jul 3; 8: 3074–3104.
10.
SinghNKSinghYKumarS,et al.Integration of GA and neuro-fuzzy approaches for the predictive analysis of gas-assisted EDM responses. SN Appl Sci2020 Jan; 2: 1–4.
11.
DedeakayoğullarıHKaçalAKeserK. Modeling and prediction of surface roughness at the drilling of SLM-Ti6Al4V parts manufactured with pre-hole with optimized ANN and ANFIS. Measurement ( Mahwah N J)2022 Nov 15; 203: 112029.
12.
SinghDPMishraSPorwalRK. Parametric analysis through ANFIS modelling and optimization of micro-hole machining in super duplex stainless steel by die-sinking EDM. Adv Mater Process Technol2023 Oct 2; 9: 1885–1902.
13.
KalitaKChakrabortySGhadaiRK,et al.Parametric optimization of non-traditional machining processes using multi-criteria decision making techniques: literature review and future directions. Multiscale and multidisciplinary modeling. Exp Des2023 Mar; 6: 1–40.
14.
SarkerBChakrabortyS. Discriminant analysis-based parametric study of an electrical discharge machining process. Scientia Iranica2021 Nov 14; 31: 186–205.
15.
UpadhyayAPrakashVSharmaV. Optimizing material removal rate using artificial neural network for micro-EDM. Inresearch anthology on artificial neural network applications, USA: IGI Global, 2022, pp. 843–866.
16.
RaoTB. Prediction of EDMed micro-hole quality characteristics using hybrid bio-inspired machine learning-based predictive approaches. Int J Interact Des Manuf (IJIDeM)2023 Apr; 17: 747–764.
17.
SinghSKMaliHSUnuneDR, et al.Application of generalized regression neural network and Gaussian process regression for modelling hybrid micro-electric discharge machining: a comparative study. Processes2022 Apr 13; 10: 755.
18.
KumarPAVivekJSenniangiriN, et al.A study of added sic powder in kerosene for the blind square hole machining of cfrp using electrical discharge machining. Silicon2022 Feb; 14: 1831–1849.
19.
VoraJPrajapatiNPatelS, et al.Multi-response optimization and effect of alumina mixed with dielectric fluid on WEDM process of Ti6Al4V. Inrecent advances in mechanical infrastructure: proceedings of ICRAM 2021, Singapore: Springer, 2022, pp. 277–287.
20.
KumarAPradhanMK. An ANFIS modelling and genetic algorithm-based optimization of through-hole electrical discharge drilling of Inconel-825 alloy. J Mater Res2023 Jan 28; 38: 312–327.
21.
ElumalaiBGowriSHariharanP,et al.Experimental investigations on µED milling of Inconel 718 with nano SiC abrasive mixed dielectric. Mater Res2021 Nov 22; 25: e20210468.
22.
OzkavakHVSofuMMDumanB,et al.Estimating surface roughness for different EDM processing parameters on Inconel 718 using GEP and ANN. CIRP J Manuf Sci Technol2021 May 1; 33: 306–314.
23.
VivekJMariduraiTLewiseKA, et al.Recast layer thickness and residual stress analysis for EDD AA8011/h-BN/B4C composites using cryogenically treated SiC and CFRP powder-added kerosene. Arab J Sci Eng2022 Dec; 47: 15613–15632.
24.
Rao KVMurthyPB. Modeling and optimization of tool vibration and surface roughness in boring of steel using RSM, ANN and SVM. J Intell Manuf2018 Oct; 29: 1533–1543.
25.
KumarLKumarKChhabraD. Experimental investigations of electrical discharge micro-drilling for Mg-alloy and multi-response optimization using MOGA-ANN. CIRP J Manuf Sci Technol2022 Aug 1; 38: 774–786.
26.
ChaudhariRAyestaIDoshiM, et al.Effect of multi-walled carbon nanotubes on the performance evaluation of nickel-based super-alloy–Udimet 720 machined using WEDM process. Int J Adv Manuf Technol2022 Nov; 123: 2087–2105.
27.
DeyADebnathSPandeyKM. Optimization of electrical discharge machining process parameters for Al6061/cenosphere composite using grey-based hybrid approach. Trans Nonferrous Met Soc China2017 May 1; 27: 998–1010.
28.
KumarMRajamaniDAbouel NasrE, et al.A hybrid approach of ANFIS—artificial bee colony algorithm for intelligent modeling and optimization of plasma arc cutting on monel™ 400 alloy. Materials (Basel)2021 Oct 25; 14: 6373.
29.
ChatterjeeSMahapatraSSBharadwajV, et al.Prediction of quality characteristics of laser drilled holes using artificial intelligence techniques. Eng Comput2021 Apr; 37: 1181–1204.
30.
Kumar MSRajamaniDAbouel NasrE, et al.A hybrid approach of ANFIS—artificial bee colony algorithm for intelligent modeling and optimization of plasma arc cutting on Monel™ 400 alloy. Materials (Basel)2021 Oct 25; 14: 6373.
31.
ChaudhariRAyestaIDoshiM, et al.Implementation of passing vehicle search algorithm for optimization of WEDM process of nickel-based superalloy waspaloy. Nanomaterials2022 Dec 9; 12: 4394.
32.
GuptaK. Intelligent machining of shape memory alloys. Adv Sci Technol Res J2021; 15: 43–53.
33.
SaffaranAAzadi MoghaddamMKolahanF. Optimization of backpropagation neural network-based models in EDM process using particle swarm optimization and simulated annealing algorithms. J Braz Soc Mech Sci Eng2020 Jan; 42: 1–4.
34.
NaikSDasSRDhupalD,et al.Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integr Optim Sustain2022; 6: 223–251.
35.
SanjayCAlsamhanAAbidiMH. Multi response optimization of machining parameters for an annealed monel K 500 alloy in drilling using machine learning techniques and ANN. J Intell Fuzzy Syst2022 Jan 1; 42: 5605–5625.
36.
HasanMMSalehTSophianA,et al.Experimental modeling techniques in electrical discharge machining (EDM): a review. Int J Adv Manuf Technol2023 Jun 6; 127: 2125–2150.
37.
ChaudhariRKhannaSVoraJ, et al.Experimental investigations and optimization of MWCNTs-mixed WEDM process parameters of nitinol shape memory alloy. J Mater Res Technol2021 Nov 1; 15: 2152–2169.
38.
SelvarajSKKaliappanJMuthuswamyN,et al.Prognostics, Health Assessment, and Modelling of Material Removal Rate by EDM for Al 6061 and AISI 304 via Cockroach Swarm and Fruit Fly Optimization Approaches. Adv Mater Sci Eng. 2022 Oct 4; 2022: 1–19.
39.
SinghRAbouSHussainI, et al. Modelling and optimizing performance parameters in the wire-electro discharge machining of Al5083/B 4 C composite by multi-objective response surface methodology. J Braz Soc Mech Sci Eng2020 Jun; 42: 1–32.
40.
LeeCHLaiTS. An intelligent system for improving electric discharge machining efficiency using artificial neural network and adaptive control of debris removal operations. IEEE Access2021 May 14; 9: 75302–75312.
41.
SharmaDBhowmickAGoyalA. Enhancing EDM performance characteristics of Inconel 625 superalloy using response surface methodology and ANFIS integrated approach. CIRP J Manuf Sci Technol2022; 37: 155–173.
42.
UpadhyayAnanyaPrakashVedSharmaVinay. “Optimizing material removal rate using artificial neural network for micro-EDM.” Research anthology on artificial neural network applications. IGI Global2022; 843–866.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
