To achieve better performance from parabolic solar trough collector, rotational motion in the heat-carrying liquid is imposed by installing spinning star inserts in the steady receiver. The goal of this analytical investigation is to reduce the temperature gradient in the fluid flow. A total of four cases for parabolic trough collectors are simulated in ANSYS 22R1 Fluent. Three steady receivers fitted with rotating star inserts and one without inserts is examined. Hybrid nanofluids of 1% volume content in water are obtained by mixing aluminum oxide and copper oxide. This examination considers rotating inserts in the receiver with a velocity ranging from 0 to 15 rad/s. The flow rate is from 0.016 kg/s to 0.033 kg/s. The outcomes are analyzed in terms of thermal efficiency, Nusselt number, outlet temperature, and pump work demand. It is observed that maximum improvement for thermal efficiency and Nusselt number are 38.03% and 50.90% for case 3 (star inserts with fin height of 25 mm and length of 4 mm) at 15 rad/s than receiver without inserts with nanofluid 1 (copper oxide 75%–aluminum oxide 25%) for 0.033 kg/s flow rate. At the same operating condition, the maximum increment for pump work demand is 20.41% for case 3 than receivers without inserts.
MustafaJAlqaedSSharifpurM. Numerical study on performance of double-fluid parabolic trough solar collector occupied with hybrid non-Newtonian nanofluids: investigation of effects of helical absorber tube using deep learning. Eng Anal Boundary Elem2022; 140: 562–580.
2.
ChakrabortyODasBGuptaR. Performance of parabolic trough collector having rotating receiver: Effect of elliptical insert and hybrid nanofluid. Int J Energy Res2022. https://doi.org/10.1002/er.8225.
3.
SamiezadehSKhodaverdianRDoranehgardMH,et al.CFD Simulation of thermal performance of hybrid oil-Cu-Al2O3 nanofluid flowing through the porous receiver tube inside afinned parabolic trough solar collector. Sustain Energy Technol Assess2022; 50: 101888.
4.
SulimanMIbrahimMSaeedT. Improvement of efficiency and PEC of parabolic solar collector containing EG-Cu-SWCNT hybrid nanofluid using internal helical fins. Sustain Energy Technol Assess2022; 52(Part B): 102111.
5.
MohammedHAVuthaluruHBLiuS. Heat transfer augmentation of parabolic trough solar collector receiver's tube using hybrid nanofluids and conical turbulators. J Taiwan Inst Chem Eng2021; 125: 215–242.
6.
SaniFHPourfallahMGholiniaM. The effect of MoS2–Ag/ H2O hybrid nanofluid on improving the performance of a solar collector by placing wavy strips in the absorber tube. Case Stud Therm Eng2022; 30: 101760.
7.
KhanMAlsaduniINAlluhaidanM,et al.Evaluating the energy efficiency of a parabolic trough solar collector filled with a hybrid nanofluid by utilizing double fluid system and a novel corrugated absorber tube. J Taiwan Inst Chem Eng2021; 124: 150–161.
8.
JosephASreekumarSThomasS. Energy and exergy analysis of SiO2/Ag-CuO plasmonic nanofluid on direct absorption parabolic solar collector. Renew Energy2020; 162: 1655–1664.
9.
FattahiA.Numerical simulation of a solar collector equipped with a twisted tape and containing a hybrid nanofluid. Sustain Energy Technol Assess2021; 45: 101200.
10.
BellosETzivanidisC.Thermal analysis of parabolic trough collector operating with mono and hybrid nanofluids. Sustain Energy Technol Assess2018; 26: 105–115.
11.
AlqarniMMMahmoudEEAlgehyneEA, et al.Improvement of the thermal and hydraulic performance of parabolic trough collectors using hybrid nanofluids and novel turbulators with holes and ribs. Sustain Energy Technol Assess2021; 47: 101480.
12.
MashhadianAHeyhatMMMahianO.Improving environmental performance of a direct absorption parabolic trough collector .by using hybrid nanofluids. Energy Convers Manage2021; 244: 114450.
13.
AlnaqiAAAlsarrafJAl-RashedAAAA. Hydrothermal effects of using two twisted tape inserts in a parabolic trough solar collector filled with MgO-MWCNT/thermal oil hybrid nanofluid. Sustain Energy Technol Assess2021; 47: 101331.
14.
SreekumarSJosephAKumarCSS, et al.Investigation on influence of antimony tin oxide/silver nanofluid on direct absorption parabolic solar collector. J Cleaner Prod2020; 249: 119378.
15.
AliAMAlemrajabiARezaeiA.Experimental investigation of thermal performance for direct absorption solar parabolic trough collector (DASPTC) based on binary nanofluids. Exp Therm Fluid Sci2017; 80: 218–227.
16.
ZaboliMAjarostaghiSSMSaedodinS, et al.Hybrid nanofluid flow and heat transfer in a parabolic trough solar collector with inner helical axial fins as turbulator. Eur Phys J Plus2021; 136: 841.
17.
MineaAAEl-MaghlanyWM. Influence of hybrid nanofluids on the performance of parabolic trough collectors in solar thermal systems: recent findings and numerical comparison. Renew Energy2018; 120: 350–364.
18.
KhetibYAlahmadiAAlzaedA,et al.Simulation of a parabolic trough solar collector containing hybrid nanofluid and equipped with compound turbulator to evaluate exergy efficacy and thermal-hydraulic performance. Energy Sci Eng2021. https://doi.org/10.1002/ese3.975.
19.
EkicilerRArslanKTurgutQ,et al.Effect of hybrid nanofluid on heat transfer performance of parabolic trough solar collector receiver. J Therm Anal Calorim2021; 143: 1637–1654.
20.
Al-OranOLezsovitsF. A hybrid nanofluid of alumina and tungsten oxide for performance enhancement of a parabolic trough collector under the weather conditions of Budapest. Appl Sci2021; 11: 4946.
21.
ShakerBGholiniaMPourfallahM,et al.CFD analysis of Al2O3-syltherm oil nanofluid on parabolic trough solar collector with a new flange-shaped turbulator model. Theor Appl Mech Lett2022; 12: 100323.
22.
HosseiniSMSDehajMS. An experimental study on energetic performance evaluation of a parabolic trough solar collector operating with Al2O3/water and GO/water nanofluids. Energy2021; 234: 121317.
23.
MustafaJAlqaedSSharifpurM,et al.The effect of using multichannel twisted tape and nanofluid on the absorber tube's heat transfer and the efficiency of a linear parabolic solar collector. Sustain Energy Technol Assess2022; 52(Part D): 102329.
24.
DehajMSRezaeianMMousaviD,et al.Efficiency of the parabolic through solar collector using NiFe2O4/water nanofluid and U-tube. J Taiwan Inst Chem Eng2021; 120: 136–149.
25.
BellosETzivanidisCAntonopoulosKA, et al.Thermal enhancement of solar parabolic trough collectors by using nanofluids and converging-diverging absorber tube. Renew Energy2016; 94: 213–222.
26.
WangYXuJLiuQ,et al.Performance analysis of a parabolic trough solar collector using Al2O3/synthetic oil nanofluid. Appl Therm Eng2016; 107: 469–478.
27.
GhasemiSERanjbarAA. Thermal performance analysis of solar parabolic trough collector using nanofluid as working fluid: a CFD modelling study. J Mol Liq2016; 222: 159–166.
28.
AbedNAfganICioncoliniA,et al.Effect of various multiple strip inserts and nanofluids on the thermal–hydraulic performances of parabolic trough collectors. Appl Therm Eng2022; 201(Part B): 117798.
29.
ChakrabortyODasBGuptaR. Effect of spherical balls insert in collector tube of parabolic trough collector by considering Al2O3-based water. J Braz Soc Mech Sci Eng2022; 44: 38.
30.
VengadesanERumaneyARIMitraR,et al.Heat transfer enhancement of a parabolic trough solar collector using a semicircular multitube absorber. Renew Energy2022; 196: 111–124.
31.
VengadesanEThameenansariSManikandanEJ,et al.Experimental study on heat transfer enhancement of parabolic trough solar collector using a rectangular channel receiver. J Taiwan Inst Chem Eng2022; 135: 104361.
32.
ChakrabortyORoySDasB,et al.Computational analyses of parabolic trough solar collector in the presence of helical coil-insert. Int J Environ Sci Technol2022; 87: 15254–15275.
33.
ShiXZhaoXWangF,et al.Improving overall heat transfer performance of parabolic trough solar receiver by helically convex absorber tube. Appl Therm Eng2022; 213: 118690.
34.
XiaoHLiuPLiuZ,et al.Performance analyses in parabolic trough collectors by inserting novel inclined curved-twisted baffles. Renew Energy2021; 165(Part 2): 14–27.
35.
ChakrabortyORoySDasB,et al.Effects of helical absorber tube on the energy and exergy analysis of parabolic solar trough collector – A computational analysis. Sustain Energy Technol Assess2021; 44: 101083.
36.
ChakrabortyODasBGuptaR,et al.Heat transfer enhancement analysis of parabolic trough collector with straight and helical absorber tube. Therm Sci Eng Prog2020; 20: 100718.
37.
IsravelRSRajaMSaravananS,et al.Thermal augmentation in parabolic trough collector solar water heater using rings attached twisted tapes. Mater Today Proc2020; 21(Part 1): 127–129.
38.
BellosETzivanidisC. Investigation of a star flow insert in a parabolic trough solar collector. Appl Energy2018; 224: 86–102.
39.
PatilSRChavanbSTJadhavaNS,et al.Effect of volute tongue clearance variation on performance of centrifugal blower by numerical and experimental analysis. Mater Today: Proc2018; 5: 3883–3894.
40.
VersteegHKMalalasekeraW.An introduction to computational fluid dynamics. In: The finite volume method. New York: John Wiley and Sons Ink, 1995, pp.348–378.
41.
PetukhovBS. Heat transfer and friction in turbulent pipe flow with variable physical properties. Adv Heat Transf1970; 6: 504–565.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
