In this study, a numerical analysis of a microchannel with the different configuration of varying height of pin fins entrenched at the bottom of the channel base wall has been carried out. Five different configurations of pin fins arrangement which are considered in this study are, Case 1(Full length fins in complete microchannel), Case 2(Full length fins at the upstream), Case 3(Full length fins at the downstream), Case 4(Full length fin at the center of microchannel), Case 5(Full length fins at the inlet and exit of microchannel) and the results of these five cases are compared with the plain rectangular microchannel. In this investigation, deionized ultra-filtered water is used and Reynold’s number is ranging from 150 to 350. Results reveals that the highest Nusselt number is achieved by case 2 at a lesser value of Reynold’s number while by case 5 at higher Reynold’s number and the lowest pressure drop is occurring in case 4. The overall thermal performance of case 2 beats the corresponding cases.
QuWMudawarI.Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink. Int J Heat Mass Transfer2002;
45: 2549–2565.
2.
ColganEGFurmanBGaynesM, et al.
A practical implementation of silicon microchannel coolers for high power chips. IEEE Trans Comp Packag Technol2007;
30: 218–225.
3.
TuckermanDBPeaseRFW.High-performance heat sinking for VLSI. IEEE Electron Device Lett1981;
2: 126–129.
4.
KandlikarSGGrandeWJ. Evolution of microchannel flow passages – thermohydraulic performance and fabrication technology. In: ASME international mechanical engineering congress & exposition, New Orleans, Louisiana, 17–22 November 2002.
5.
MehendaleSSJacobiAMShahRK.Fluid flow and heat transfer at micro and meso-scales with applications to heat exchanger design. Appl Mech Rev2000;
53: 175–193.
6.
Cornwell K and Kew PA. Boiling in Small Parallel Channels. In: Pilavachi PA (eds) Energy Efficiency in Process Technology. Dordrecht: Springer, 1993, pp.624--638.
7.
KewPACornwellK.Correlation for prediction of boiling heat transfer in small diameter channel. Appl Therm Eng1997;
17: 705–715.
8.
HarirchianTGarimellaSV.A comprehensive flow regime map for microchannel flow boiling with quantitative transition criteria. Int J Heat Mass Transfer2010;
53: 2694–2702.
9.
SuiYLeePSTeoCJ.An experimental study of flow friction and heat transfer in wavy microchannels with rectangular cross section. Int J Therm Sci2011;
50: 2473–2482.
10.
LinLChenYYZhangXX, et al.
Optimization of geometry and flow rate distribution for double-layer microchannel heat sink. Int J Therm Sci2014;
78: 158–168.
11.
LinLDengMXZhangXX, et al.
Numerical analysis and parametric study of multilayered microchannel heat sinks. Adv Mech Eng2015;
7: 1–10.
12.
IzadiMHashemi PourSMRKarimdoost YasuriA, et al.
Mixed convection of a nanofluid in a three-dimensional channel: effect of opposed buoyancy force on hydrodynamic parameters, thermal parameters and entropy generation. J Therm Anal Calorim2019;
136: 2461–2475.
13.
IzadiMMohammadiSAMehryanSAM, et al.
Thermogravitational convection of magnetic micropolar nanofluid with coupling between energy and angular momentum equations. Int J Heat Mass Transfer2019;
145: 118748.
14.
IzadiMShahmardanMMRashidiAM.Study on thermal and hydrodynamic indexes of a nanofluid flow in a micro heat sink. Transp Phenomena Nano Micro Scale2013;
1: 53–63.
15.
ArmaghaniTKasaeipoorAIzadiM, et al.
MHD natural convection and entropy analysis of a nanofluid inside T-shaped baffled enclosure. Hff2018;
28: 2916–2941.
16.
MohebbiRMehryanSAMIzadiM, et al.
Natural convection of hybrid nanofluids inside a partitioned porous cavity for application in solar power plants. J Therm Anal Calorim2019;
137: 1719–1733.
17.
MohebbiRIzadiMSajjadiH, et al.
Examining of nanofluid natural convection heat transfer in a Γ-shaped enclosure including a rectangular hot obstacle using the lattice Boltzmann method. Physica A: Stat Mech Appl2019;
526: 120831.
18.
IzadiMBastaniBSheremetMA.Numerical simulation of thermogravitational energy transport of a hybrid nanoliquid within a porous triangular chamber using the two-phase mixture approach. Adv Powder Technol2020;
31: 2493–2504.
19.
MehryanSAMGhalambazMChamkhaAJ, et al.
Numerical study on natural convection of Ag–MgO hybrid/water nanofluid inside a porous enclosure: a local thermal non-equilibrium model. Powder Technol2020;
367: 443–455.
20.
IzadiM.Effects of porous material on transient natural convection heat transfer of nano-fluids inside a triangular chamber. Chin J Chem Eng2020;
28: 1203–1213.
21.
IzadiMSheremetMAMehryanSAM, et al.
MHD thermogravitational convection and thermal radiation of a micropolar nanoliquid in a porous chamber. Int Commun Heat Mass Transfer2020;
110: 104409.
22.
IzadiMOztopHFSheremetMA, et al.
Coupled FHD–MHD free convection of a hybrid nanoliquid in an inversed T-shaped enclosure occupied by partitioned porous media. Numer Heat Transfer, Part A: Appl2019;
76: 479–498.
23.
IzadiMMohebbiRSajjadiH, et al.
LTNE modeling of magneto-ferro natural convection inside a porous enclosure exposed to nonuniform magnetic field. Physica A: Stat Mech Appl2019;
535: 122394.
24.
IzadiMJavanahramMZadehSMH, et al.
Hydrodynamic and heat transfer properties of magnetic fluid in porous medium considering nanoparticle shapes and magnetic field-dependent viscosity. Chin J Chem Eng2020;
28: 329–339.
25.
IzadiMSheremetMAMehryanSAM.Natural convection of a hybrid nanofluid affected by an inclined periodic magnetic field within a porous medium. Chin J Physics2020;
65: 447–458.
26.
IzadiMGhalambazMMehryanSAM.Location impact of a pair of magnetic sources on melting of a magneto-ferro phase change substance. Chin J Physics2020;
65: 377–388.
27.
ZhaoJHuangSGongL. Numerical studies on geometric features of microchannel heat sink with pin fin structure. In: Proceedings of 4th micro and nano flows conference UCL, London, UK, 7–10 September 2014. pp.7–10. London.
28.
JingDHeL.Numerical studies on the hydraulic and thermal performances of microchannels with different cross-sectional shapes. Int J Heat Mass Transfer2019;
143: 118604.
29.
JingDSongJSuiY.Hydraulic and thermal performances of laminar flow in fractal treelike branching microchannel network with wall velocity slip. Fractals2020;
28: 2050022.
30.
ZhanXChenGJingD.Optimal analysis of the hydraulic and mixing performances of symmetric T-shaped rectangular microchannel mixer. Fractals. DOI: 10.1142/S0218348X21500420
31.
SaravananVUmeshCK.Numerical comparison for thermo-hydraulic performance of pin fin heat sink with micro channel pin fin heat sink. Sadhana2018;
43: 1–15.
32.
JadhavSVPawarPM.Performance analysis of microchannel with different pin fin layouts. Int J Numer Model Electron Networks, Devices Fields2019; 33: 1–19.
33.
JadhavSVPawarPMRongeBP.Effect of pin-fin geometry on microchannel performance. Chem Prod Process Model2019;
14: 1--15.
34.
YuXWoodcockCPelesY, et al. Single-phase modeling in microchannel with piranha pin fin. In: Proceedings of the COMSOL conference, Boston, MA, 7–9 October 2015.
35.
Al-DamookAKapurNSummersJL, et al.
Computational design and optimisation of pin fin heat sinks with rectangular perforations. Appl Therm Eng2016;
105: 691–703.
36.
FersterKKKirschKLTholeKA.Effects of geometry, spacing, and number of pin fins in additively manufactured microchannel pin fin arrays. J Turbomach2018;
140: 1–10.
37.
JiaYXiaGLiY, et al.
Heat transfer and fluid flow characteristics of combined microchannel with cone-shaped micro pin fins. Int Commun Heat Mass Transfer2018;
92: 78–89.
38.
WangYNayebzadehAYuX, et al.
Local heat transfer in a microchannel with a pin fin – experimental issues and methods to mitigate. Int J Heat Mass Transfer2017;
106: 1191–1204.
39.
IzciTKozMKoşarA.The effect of micro pin-fin shape on thermal and hydraulic performance of micro pin-fin heat sinks. Heat Transf Eng2015;
36: 1447–1457.
40.
HasanMIMuterDM. Study the micro pin fin and micro channel heat sinks with different types of cooling fluids. In: First International Scientific Conference of Al-Ayen University 2019, Nasiriyah, Iraq, 30–31 March 2019, pp.0–32. Iraq.
41.
YadavVBaghelKKumarR, et al.
Numerical investigation of heat transfer in extended surface microchannels. Int J Heat Mass Transfer2016;
93: 612–622.
42.
QidwaiMOHasanMM.Effect of variation of cylindrical pin fins height on the overall performance of microchannel heat sink. Proc IMechE, Part E: J Process Mechanical Engineering2019;
233: 980–990.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
