Sage Journals: Discover world-class research

Abstract

In the present study, a detailed numerical simulations of liquid flow in microchannel heat sink with four different geometry of ribs: rectangular (RR), backward triangular (BTR), forward triangular (FTR) and diamond (DR) arranged symmetrically inside reentrant fan shaped cavities (FC) on side walls has been conducted and compared with smooth channel (SC) to acquire fluid flow and heat transfer characteristics between Reynolds numbers of 136−588. The local pressure, temperature and heat transfer coefficients were determined to understand the convective heat transfer regimes and to analyze local flow behavior. The three-dimensional conjugate heat transfer model, investigation is done extensively to identify the influence of geometrical parameters towards augmenting thermal performance with parametric optimization. Evolved governing equations are solved by using SIMPLEC algorithm. Attempt has been made to improve heat extraction ability with reasonable pressure drop by replacing the existing simple design of microsink. It is observed that Nusselt number and friction factor are in good agreement with previous experimental data. Based on detailed parametric study, it was found that FC-RR is good in achieving maximum Nusselt number, but due to higher pressure drop penalty giving lower performance. Out of four proposed, FC-DR is conferring upstanding balance between heat transfer, pressure drop and giving the best thermal performance of 1.97 at Re = 391.47.

Keywords

Microchannel heat sink ribs protrusion cavities thermal performance heat transfer enhancement

Get full access to this article

View all access options for this article.

References

Tuckerman

Pease

RFW.

High-performance heat sinking for VLSI. IEEE Electron Device Lett 1981; 2: 126–129.

Mudawar

Analysis of three-dimensional heat transfer in micro-channel heat sinks. Int J Heat Mass Transfer 2002; 45: 3973–3985.

Lee

Garimella

Liu

Investigation of heat transfer in rectangular microchannels. Int J Heat Mass Transfer 2005; 48: 1688–1704.

Steinke

Kandlikar

SG.

Single phase heat transfer enhancement technique in microchannel and minichannel flows. Int Conf Microchannel Minichannels 2004; 41642: 141–148.

Chai

Xia

Zheng Zhou

, et al. Numerical simulation of fluid flow and heat transfer in a microchannel heat sink with offset fan-shaped reentrant cavities in sidewall. Int Commun Heat Mass Transf 2011; 38: 577–584.

Chai

Xia

Wang

, et al. Heat transfer enhancement in microchannel heat sinks with periodic expansion–constriction cross-sections. Int J Heat Mass Transf 2013; 62: 741–751.

Chai

Xia

Zhou

, et al. Optimum thermal design of interrupted microchannel heat sink with rectangular ribs in the transverse microchambers. Appl Therm Eng 2013; 51: 880–989.

Xia

Chai

Zhou

, et al. Effects of structural parameters on fluid flow and heat transfer in a microchannel with aligned fan-shaped reentrant cavities. Int J Therm Sci 2011; 50: 411–419.

Xia

Zhai

Cui

Numerical investigation of thermal enhancement in a micro heat sink with fan-shaped reentrant cavities and internal ribs. Appl Therm Eng 2013; 58: 52–60.

10.

Ghani

Kamaruzaman

Sidik

NAC.

Heat transfer augmentation in a microchannel heat sink with sinusoidal cavities and rectangular ribs. Int J Heat Mass Transf 2017; 108: 1969–1981.

11.

Datta

Sharma

Sanyal

, et al. A conjugate heat transfer analysis of performance for rectangular microchannel with trapezoidal cavities and ribs. Int J Therm Sci 2019; 138: 425–446.

12.

Ahmed

MI.

Optimum thermal design of triangular, trapezoidal and rectangular grooved microchannel heat sinks. Int Commun Heat Mass Transf 2015; 66: 47–57.

13.

Ghaedamini

Lee

Teo

CJ.

Developing forced convection in converging–diverging microchannels. Int J Heat Mass Transfer 2013; 65: 491–499.

14.

Zhang

Jaluria

Zhang

, et al. Combind experimental and numerical study for multipe microchannel heat transfer system. In: Proceedings of the 14th international heat transfer conference, Washington, USA, August 8–13 2013. Paper No. IHTC- 22235.

15.

Zhang

Jaluria

Combined experimental and numerical study of a new configuration of multiple microchannel heat sink for heat removal. In: Proceedings of the ASME 2011 international mechanical engineering congress & exposition, November 11–17 2011, Denver, Colorado, USA. Paper No. IMECE2011–62535.

16.

Xie

Zhang

Sunden

, et al. Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow. Appl Therm Eng 2014; 62: 791–802.

17.

Kuppusamy

Mohammed

Lim

CW.

Numerical investigation of trapezoidal grooved microchannel heat sink using nanofluids. Thermochim Acta 2013; 573: 39–56.

18.

Kuppusamy

Mohammed

Lim

CW.

Thermal and hydraulic characteristics of nanofluid in a triangular grooved microchannel heat sink (TGMCHS). Appl Math Comput 2014; 246: 168–183.

19.

Xia

, et al. Characteristics of laminar flow and heat transfer in microchannel heat sink with triangular cavities and rectangular ribs. Int J Heat Mass Transf 2016; 98: 17–28.

20.

Zhang

Chen

Xie

, et al. Numerical analysis of constructal water-cooled microchannel heat sinks with multiple bifurcations in the entrance region. Numer Heat Transfer Part A 2015; 67: 632–650.

21.

Geyer

Rosaguti

Fletcher

, et al. Thermohydraulics of square-section microchannels following a serpentine path, Springer-Verlag. Microfluid Nanofluid 2006; 2: 195–204.

22.

Koomey

Growth in data center electricity use 2005 to 2010. A report by Analytical Press, completed at the request of The New York Times, 2011.

23.

Tatchell-Evans

Kapur

Summers

, et al. An experimental and theoretical investigation of the extent of bypass air within data centres employing aisle containment, and its impact on power consumption. Appl Energy 2017; 186: 457–469.

24.

Global e-Sustainability Initiative and The Boston Consuting Group. GeSI SMARTer 2020. Belgium: Global eSustainability Initiative, 2012.

25.

Lawes

RA.

Manufacturing costs for microsystems/MEMS using high aspect ratio microfabrication techniques. Microsyst Technol 2007; 13: 85–95.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.94 MB

Numerical investigation on fluid flow and convective heat transfer in a microchannel heat sink with fan-shaped cavities and ribs

Abstract

Keywords

Get full access to this article

References

Supplementary Material