Inter-lobe clearance estimation for twin-screw rotor pairs with point-meshing features

Abstract

In practical production, it is impossible even to measure the inter-lobe (meshing) clearance of a screw rotor pair. However, understanding of the clearance distribution is essential since it is a major leakage path which greatly affects the twin-screw pump performance. Previous publications did not disclose explicit detail on how to calculate the meshing clearance for screw rotor pairs with point-meshing features. Therefore, this study proposes a meshing clearance calculation method for screw rotor pairs with point-meshing features. The complex meshing clearance can be simply determined by calculating the shortest distance between two normal-rack profiles generated using point-enveloping principle. Clearance distributions are much more intelligible to be exhibited on a 3-D contact line and the rotor profile. Due to its immeasurability in practice, the adaptability and the solution accuracy of the proposed numerical method are verified by applications on different rotor profiles and comparisons with measured results from a 3-D CAD model. The meshing clearance in a variable-pitch screw rotor pair and the clearance adjustability are also illustrated through the proposed examples.

Keywords

Meshing clearance point meshing screw rotor contact line variable pitch

Get full access to this article

View all access options for this article.

References

Fleming

Tang

The analysis of leakage in a twin screw compressor and its application to performance improvement. Proc IMechE, Part E: J Process Mechanical Engineering 1995; 209: 125–136.

Liu

Yang

Zhao

, et al. Analysis of performance of two-stage screw compressor under various operating conditions. Proc IMechE, Part A: J Power and Energy 2016; 230: 660–668.

Husak

Kovacevic

Rane

Numerical analysis of screw compressor rotor and casing deformations. In: Mirsad H and Samir A (eds) International symposium on innovative and interdisciplinary applications of advanced technologies. Cham: Springer, 2017, pp. 933–940.

Xiao

Gao

Wang

, et al. Conjugation criterion for making clearance of the meshed helical surfaces. J Mech Design 2005; 127: 164–168.

Liu

, et al. A comprehensive contact analysis of planetary roller screw mechanism. J Mech Des 2017; 139: 012302.

Xiong

Calculation on the inter-lobe clearance distribution of twin-screw compressor by optimization method. In: The Ray W. Herrick Laboratories (ed.) International compressor engineering conference at Purdue, Indiana, USA, 17–20 July 2006, paper no. 1829, pp. 1–8. Purdue e-Pubs of Purdue University.

Huang

Lai

Lin

, et al. Two-dimensional localisation and clearance evaluation of screw rotors. Int J Comp Apps in Tech 2010; 37: 74–85.

Fong

Huang

Fang

HS.

Evaluating the inter-lobe clearance of twin-screw compressor by the iso-clearance contour diagram (ICCD). Mech Mach Theory 2001; 36: 725–742.

Fong

Huang

FC.

Evaluating the interlobe clearance and determining the sizes and shapes of all the leakage paths for twin-screw vacuum pump. Proc IMechE, Part C: J Mechanical Engineering Science 2006; 220: 499–506.

10.

Buckney

Kovacevic

Stosic

Design and evaluation of rotor clearances for oil-injected screw compressors. Proc IMechE, Part E: J Process Mechanical Engineering 2016; 23: 26–37.

11.

Stošić

On gearing of helical screw compressor rotors. Proc IMechE, Part C: J Mechanical Engineering Science 1998; 212: 587–594.

12.

Tang

Fleming

JS.

Clearances between the rotors of helical screw compressors: their determination, optimization and thermodynamic consequences. Proc IMechE, Part E: J Process Mechanical Engineering 1994; 208: 155–163.

13.

Chi

JW.

A numerical method for the evaluation of the meshing clearance for twin screw rotors with discrete tooth profile points. Mech Mach Theory 2013; 70: 62–73.

14.

Rogers

Adams

Mathematical elements for computer graphics. New York: McGraw-Hill Higher Education, 1989.

15.

Litvin

Fuentes

Gear geometry and applied theory. 2nd ed. Cambridge: Cambridge University Press, 2004.

16.

Kawamura

Yanagisawa

Nagata

Screw rotor and method of generating tooth profile therefor. Patent US5697772A, USA, 1997.

17.

Chung

Lin

HL.

Methods for designing lobe-type rotors. Patent EP2088284A1, EU, 2009.

18.

Fong

ZH.

Rotor profile design for the twin-screw compressor based on the normal-rack generation method. J Mech Design 2008; 130: 042601.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.40 MB