The cross-section, thickness, and material of the autobody structure determine the crashworthiness and lightweight level. Different from the variables in traditional autobody design that are considered separately, the basic theory of 3G-optimization is to simultaneously consider geometric shape (Geometry), the thickness of structure (Gauge), and material grade (Grade) in structural optimization design, which is conducive to maximizing the lightweight potential of the structure. This paper presents a cross-section optimization method for multi-cell thin-walled structures based on 3G-optimization, which is used in the structural design of crash box. Based on full width frontal collision condition, the cross-section shape, thickness, and material variables of the multi-cell crash box are optimized simultaneously. Multiple sets of optimization schemes show obvious weight reduction effect while ensuring safety. Besides, the sub-system decoupling method and hybrid cellular automaton (HCA) method are applied to 3G-optimization process, which is beneficial to improve the calculation efficiency and provide a theoretical basis for the definition of the initial design space for 3G-optimization.
QinH. Research on the key problems of forward conceptual lightweight design of automotive body. PhD Thesis, Hunan University, 2012.
2.
LiuWGGuanLJLinGZ. Optimized design of front autobody based on section load analysis. J Mech Eng2010; 11: 34–37.
3.
Ten BroekCSinghHHillebrechtM. Lightweight design for the future steel vehicle. Auto Tech Review2012; 1(11): 24–30.
4.
ErmolaevaNSCastroMBGKandacharPV. Materials selection for an automotive structure by integrating structural optimization with environmental impact assessment. Mater Des2004; 25(8): 689–698.
5.
LuSMaHXinL, et al. Lightweight design of bus frames from multi-material topology optimization to cross-sectional size optimization. Eng Optim2019; 51(6): 961–977.
6.
RimnacAPfatschbacherT. Trends and solutions for future steel grade development. In: Materials Science Forum2019. Trans Tech Publications Ltd.
7.
KimHS. New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency. Thin Walled Struct2002; 40(4): 311–327.
ZhangXZhangH. Energy absorption of multi-cell stub columns under axial compression. Thin Walled Struct2013; 68: 156–163.
10.
NajafiARais-RohaniM. Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes. Thin Walled Struct2011; 49(1): 1–12.
11.
FangJGaoYSunG, et al. On design of multi-cell tubes under axial and oblique impact loads. Thin Walled Struct2015; 95: 115–126.
12.
GoyalSAnandCSSharmaSK, et al. Crashworthiness analysis of foam filled star shape polygon of thin-walled structure. Thin Walled Struct2019; 144: 106312.
13.
HunkelerS. Topology optimisation in crashworthiness design via hybrid cellular automata for thin walled structures. PhD Thesis, Queen Mary University of London, London, 2014.
14.
DuddeckFHunkelerSLozanoP, et al. Topology optimization for crashworthiness of thin-walled structures under axial impact using hybrid cellular automata. Struct Multidiscip Optim2016; 54: 415–428.
15.
ZengDDuddeckF. Improved hybrid cellular automata for crashworthiness optimization of thin-walled structures. Struct Multidiscipl Optim2017; 56(1): 101–115.
16.
FangJSunGQiuN, et al. Topology optimization of multicell tubes under out-of-plane crushing using a modified artificial bee colony algorithm. J Mech Design (1990)2017; 139(7): 071403.
17.
SunGPangTFangJ, et al. Parameterization of criss-cross configurations for multiobjective crashworthiness optimization. Int J Mech Sci2017; 124–125: 145–157.
18.
QiuNGaoYFangJ, et al. Topological design of multi-cell hexagonal tubes under axial and lateral loading cases using a modified particle swarm algorithm. Appl Math Model2018; 53: 567–583.
19.
XuXXuGChenJ, et al. Multi-objective design optimization using hybrid search algorithms with interval uncertainty for thin-walled structures. Thin-Walled Struct2022; 175: 109218.
20.
DebK. Multi-objective optimization using evolutionary algorithms. Hoboken, NJ: John Wiley & Sons, 2001.
21.
CoelloCALamontGBVan VeldhuizenDA. Evolutionary algorithms for solving multi-objective problems. New York, NY: Springer, 2007.
22.
NingWK. Research on evolutionary multi-objective optimization algorithm and its application. PhD Thesis, Xidian University, 2018.
23.
HardyRL. Multi-quadric equations of topography and other irregular surfaces. J Geophys Res1971; 76(8): 1905–1915.
24.
LongTLiuJ, et al. Discuss on approximate optimization strategies using design of computer experiments and metamodels for flight vehicle design. J Mech Eng2016; 52(14): 79–105.
25.
ZhangL. Lightweight design of the bumper beam system based on multiple modes. MSc Thesis, Jilin University, 2016.
26.
WuLN. Research on key techniques of concept design for automotive frontal crashworthiness. PhD Thesis, Jilin University, 2016.
27.
LiuHL. The Optimization study on the crashworthiness of the automobile crash-box. MSc Thesis, Shanghai University of Engineering Science, 2015.
28.
XieHZhouSQWangPJ. Multi-objective variable section optimization design of an electric vehicle B-pillar based on side-collision conditions. J Plast Eng2020; 27(11): 18–25.
29.
ZhangJYJiangZLiZY, et al. Optimization design of vehicle CFRP B-pillar stiffening panel for crashworthiness. Automot Eng2018; 40(10): 1166–1171.
30.
ChenX. Optimum design of car body B-pillar structure based on simplified top pressure and side collision model. J Shanghai Auto2019; 10: 28–36.
31.
TovarAPatelNMNieburGL, et al. Topology optimization using a hybrid cellular automaton method with local control rules. J Mech Des2006; 128(6): 1205–1216.
32.
CaoLBSongHBWuHQ. Crashworthiness design of automotive front rail using topology optimization method. China Mech Eng2016; 27(6): 827–832.
33.
LangsethMHopperstadOSBerstadT. Crashworthiness of aluminium extrusions: validation of numerical simulation, effect of mass ratio and impact velocity. Int J Impact Eng1999; 22(9–10): 829–854.
34.
DaviesG.Materials for automobile bodies. Oxford: Butterworth-Heinemann, 2012.
35.
ZhangXChengGZhangH. Theoretical prediction and numerical simulation of multi-cell square thin-walled structures. Thin Walled Struct2006; 44(11): 1185–1191.
36.
ZhangJY. Parameter design method for structure and occupant restraint system in vehicle crash. Beijing: Science Press, 2018. pp.24–33.
