Abstract
The common steering mechanisms approximately establish the Ackermann equation. The more the mechanism design parameters, the higher the accuracy can be achieved by using optimization. Also, some mechanisms have been developed to establish the Ackermann equation accurately. Most of these mechanisms contain non-circular gear or cam that have an infinite number of design parameters. In this paper, two novel mechanisms have been designed with a limited number of design parameters, but their geometric structure is such that the governing relationship is exactly the Ackermann equation. The proof of this claim has been given in detail and validated by GeoGebra software. Also, by using force analysis, it has been shown that the forces exerted on the joints in both mechanisms are uniform, and there are no vast forces on the joints.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
