The transport industry is a major contributor to both local pollution and greenhouse gas emissions (GHGs). The key challenge today is to mitigate the adverse impacts on the environment caused by road transportation. The volatile market prices and diminishing supplies of fuel have led to an unprecedented interest in battery electric vehicles (BEVs). In addition, improvements in motor efficiencies and significant advances in battery technology have made it easier for BEVs to compete with internal combustion engine (ICE) vehicles. This paper describes and assesses the latest technologies in different elements of the BEV: powertrain architectures, propulsion and regeneration systems, energy storage systems and charging techniques. The current and future trends of these technologies have been reviewed in detail. Finally, the key issue of electric vehicle component recycling (battery, motor and power electronics) has been discussed. Global emission regulations are pushing the industry towards zero or ultra-low emission vehicles. Thus, by 2025, most cars must have a considerable level of powertrain electrification. As the market share of electric vehicles increases, clear trends have emerged in the development of powertrain systems. However, some significant barriers must be overcome before appreciable market penetration can be achieved. The objective of the current study is to review and provide a complete picture of the current BEV technology and a framework to assist future research in the sector.
Çağatay BayindirKGözüküçükMATekeA. A comprehensive overview of hybrid electric vehicle: powertrain configurations, powertrain control techniques and electronic control units. Energy Convers Manag2011; 52(2): 1305–1313.
2.
AndwariAMPesiridisARajooS, et al. A review of battery electric vehicle technology and readiness levels. Renew Sustain Energy Rev2017; 78(February): 414–430.
3.
RieckFGMachielseCVan DuinJHRMPD. Automotive, the future of mobility. In: EVS 2017 - EVS30: 30th international electric vehicle symposium & exhibition, Stuttgart, 9-11 October 2017.
4.
YongJYRamachandaramurthyVKTanKM, et al. A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects. Renew Sustain Energy Rev2015; 49: 365–385.
SarliogluBMorrisCTHanD, et al. Driving toward accessibility. IEEE Ind Appl Mag2017; 23(1): 14–25.
7.
CurryC. Lithium-ion battery costs and market. Bloomberg New Energy Finance, July5, 2017.
8.
GrunditzEAThiringerT. “Performance analysis of current BEVs based on a comprehensive review of specifications,” in IEEE Transactions on Transportation Electrification, vol. 2, no. 3, pp. 270–289, Sept.2016, doi: 10.1109/TTE.2016.2571783.
9.
Un-NoorFPadmanabanSMihet-PopaL, et al. A comprehensive study of key electric vehicle (EV) components, technologies, challenges, impacts, and future direction of development. Energies2017; 10(8): 1–82.
10.
MineeshmaGRChackoRVAmalS, et al. Component sizing of electric vehicle / hybrid electric vehicle subsystems using backward modelling approach. In: IEEE international conference on power electronics, drives and energy systems (PEDES)2016, Trivandrum, India, 14–17 December 2016, vol. 2016-Janua, pp.1–5. IEEE.
11.
JiangHXuLLiJ, et al. Energy management and component sizing for a fuel cell/battery/supercapacitor hybrid powertrain based on two-dimensional optimization algorithms. Energy2019; 177: 386–396.
12.
MooreSWRahmanKMEhsaniM. Effect on vehicle performance of extending the constant power region of electric drive motors. In: SAE technical paper series no. 724, 1999.
13.
RahmanZEhsaniMButlerKL. An investigation of electric motor drive characteristics for EV and HEV propulsion systems. In: SAE technical paper series no. 724, 2000.
14.
XueXDChengKWECheungNC. Selection of electric motor drives for electric vehicles. In: 2008 Australasian Universities power engineering conference, Sydney, NSW, Australia, 14–17 December 2008, pp.1–6. IEEE.
15.
AkhtarMJBeheraRK. Optimal design of stator and rotor slot of induction motor for electric vehicle applications. IET Electr Syst Transp2019; 9(1): 35–43.
16.
KassemRSayedKKassemA, et al. Power optimisation scheme of induction motor using FLC for electric vehicle. IET Electr Syst Transp2020; 10(3): 275–284.
17.
FaizJSharifianMBBKeyhaniA, et al. Sensorless direct torque control of induction motors used in electric vehicle. IEEE Trans Energy Convers2003; 18(1): 1–10.
YangYCastanoSMYangR, et al. Design and comparison of interior permanent magnet motor topologies for traction applications. IEEE Trans Transp Electrif2017; 3(1): 86–97.
20.
StatonDAMillerTJEWoodSE. Maximising the saliency ratio of the synchronous reluctance motor. IEE Proc B Electr Power Appl1993; 140(4): 249–259.
21.
BianchiNBolognaniSCarraroE, et al. Electric vehicle traction based on synchronous reluctance motors. IEEE Trans Ind Appl2016; 52(6): 4762–4769.
22.
KumarLJainS. Electric propulsion system for electric vehicular technology: a review. Renew Sustain Energy Rev2014; 29: 924–940.
23.
SiekluckiG. An investigation into the induction motor of tesla model S vehicle. In: 2018 International symposium on electrical machines (SME), Andrychow, Poland, 10–13 June 2018. IEEE.
24.
DoerrJArdeyNMendlGFröhlichGStraßerRLaudenbachT. The new full electric drivetrain of the Audi e-tron. In Der Antrieb von morgen 2019. JohannesL, Ed. Wiesbaden: Springer Vieweg, 2019: 13–37.
25.
FuchssSMichaelidesAStocksO, et al. The propulsion system of the new jaguar I-pace. MTZ Worldw2019; 80(1): 18–25.
26.
NaseriFFarjahEGhanbariT. An efficient regenerative braking system based on battery/supercapacitor for electric, hybrid, and plug-in hybrid electric vehicles with BLDC motor. IEEE Trans Veh Technol2017; 66(5): 3724–3738.
27.
NianXPengFZhangH. Regenerative braking system of electric vehicle driven by brushless DC motor. IEEE Trans Ind Electron2014; 61(10): 5798–5808.
28.
DixonJOrtuzarM. Ultracap and DCDC in regenerative braking system.pdf. IEEE AESS Systems Magazine, no. August2002. p. 16.
29.
GoodenoughJBParkKS. The Li-ion rechargeable battery: a perspective. J Am Chem Soc2013; 135(4): 1167–1176.
30.
ManKL, et al. Artificial intelligence approach to SoC estimation for smart BMS. ECT-2012 : Electrical and control technologies. In: Proceedings of the 7th international conference on electrical and control technologies, May 3–4, 2012, Kaunas, Lithuania. Kaunas: Technologija, 2012, no. 7; 21–24.
31.
Van den BosschePVergelsFVan MierloJ, et al. SUBAT: an assessment of sustainable battery technology. J Power Sources2006; 162(2): 913–919.
32.
ManthiramA. An outlook on lithium ion battery technology. ACS Cent Sci2017; 3(10): 1063–1069.
33.
Budde-MeiwesHDrillkensJLunzB, et al. A review of current automotive battery technology and future prospects. Proc Inst Mech Eng Part D J Automob Eng2013; 227(5): 761–776.
34.
WangQPingPZhaoX, et al. Thermal runaway caused fire and explosion of lithium ion battery. J Power Sources2012; 208: 210–224.
35.
StanAISwierczynskiMStroeDI, et al. Lithium ion battery chemistries from renewable energy storage to automotive and back-up power applications: an overview. In: 2014 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), Bran, Romania, 22-24 May 2014, pp.713–720. IEEE.
36.
TsirinomenyM, et al. Ultrafast Charging Compatibility of Electric Vehicles. IAMF 2012 : International Advanced Mobility Forum, Geneva, Switzerland, March 7–8, 2012.
37.
MiaoYHynanPVon JouanneA, et al. Current li-ion battery technologies in electric vehicles and opportunities for advancements. Energies2019; 12(6): 1–20.
38.
LyuYWuXWangK, et al. An overview on the advances of LiCoO2 cathodes for lithium-ion batteries. Adv Energy Mater2021; 11(2): 1–29.
39.
LiJMaZ-F. Past and present of LiFePO4: from fundamental research to industrial applications. Chem2019; 5(1): 3–6.
40.
LiTYuanX-ZZhangL, et al. Degradation mechanisms and mitigation strategies of nickel-rich NMC-based lithium-ion batteries. Electrochem Energ Rev2020; 3(1): 43–80.
41.
LiWLeeSManthiramA. High-Nickel NMA: a cobalt-free alternative to NMC and NCA cathodes for lithium-ion batteries. Adv Mater2020; 32(33): 1–6.
42.
PurwantoAYudhaCSUbaidillahU, et al. NCA cathode material: synthesis methods and performance enhancement efforts. Mater Res Express2018; 5(12): 122001.
43.
XiaQXuADuL, et al. High-rate, long-term performance of LTO-pillared silicon/carbon composites for lithium-ion batteries anode under high temperature. J Alloys Compd2019; 800: 50–57.
44.
HatchardTDMacNeilDDBasuA, et al. Thermal model of cylindrical and prismatic lithium-ion cells. J Electrochem Soc2001; 148(7): A755.
ZschornakMMeutznerFLückJ, et al. Fundamental principles of battery design. Phys Sci Rev2019; 3(11): 1–14.
47.
AurbachDMcCloskeyBDNazarLF, et al. Advances in understanding mechanisms underpinning lithium-air batteries. Nat Energy2016; 1(9): 1–20.
48.
CatenacciMVerdoliniEBosettiV, et al. Going electric: expert survey on the future of battery technologies for electric vehicles. SSRN Electron J. Epub ahead of print 2012. DOI: 10.2139/ssrn.2192529.
49.
IclodeanCVargaBBurneteN, et al. Comparison of different battery types for electric vehicles. IOP Conf Ser Mater Sci Eng2017; 252(1): 012058.
50.
BenvenisteGRalloHCanals CasalsL, et al. Comparison of the state of Lithium-Sulphur and lithium-ion batteries applied to electromobility. J Environ Manage2018; 226: 1–12.
DengJBin LuoWChouSL, et al. Sodium-ion batteries: from academic research to practical commercialization. Adv Energy Mater2018; 8(4): 1–17.
53.
ThounthongPRaëlSDavatB. Control strategy of fuel cell/supercapacitors hybrid power sources for electric vehicle. J Power Sources2006; 158(1): 806–814.
54.
ZhangQLiG. Experimental study on a semi-active battery-supercapacitor hybrid energy storage system for electric vehicle application. IEEE Trans Power Electron2020; 35(1): 1014–1021.
55.
BurkeAZhaoH. Present and future applications of supercapacitors in electric and hybrid vehicles. In: IEEE 82nd vehicular technology conference (VTC2015-Fall), Boston, MA, USA, 6–9 September 2015, IEEE.
56.
SongZLiJHouJ, et al. The battery-supercapacitor hybrid energy storage system in electric vehicle applications: a case study. Energy2018; 154(May): 433–441.
57.
ChengKWEDivakarBPWuH, et al. Battery-management system (BMS) and SOC development for electrical vehicles. IEEE Trans Veh Technol2011; 60(1): 76–88.
58.
SutopoWRahmawatieBFahmaF, et al. A technical review of BMS performance standard for electric vehicle applications in Indonesia. Telkomnika2018; 16(2): 544–549.
59.
ZieglerAOeserDArndtB, et al. Comparison of active and passive balancing by a long term test including a post-mortem analysis of all single battery cells. In: 2018 International IEEE conference and workshop in Óbuda on electrical and power engineering (CANDO-EPE), Budapest, Hungary, 20-21 November 2018, pp.15–20. IEEE.
60.
MouliGRCKapteinJBauerP, et al. Implementation of dynamic charging and V2G using Chademo and CCS/Combo DC charging standard. In: 2016 IEEE transportation electrification conference and Expo (ITEC), Dearborn, MI, USA, 27–29 June 2016. IEEE.
61.
XuDLifangWJianyang. Research on Li-ion battery management system. In: 2010 international conference on electrical and control engineering, Wuhan, China, 25–27 June 2010, pp.4106–4109. IEEE.
62.
XieJMaJBaiK. Enhanced coulomb counting method for state-of-charge estimation of lithium-ion batteries based on peukert’s law and coulombic efficiency. J Power Electron2018; 18(3): 910–922.
63.
BuccoliniLRicciAScavongelliC, et al. Battery Management System (BMS) simulation environment for electric vehicles. In: 2016 IEEE 16th international conference on environment and electrical engineering (EEEIC), Florence, Italy, 7–10 June 2016, pp.2–7. IEEE.
64.
ChangW-Y. The state of charge estimating methods for battery: a review. ISRN Appl Math2013; 2013(1): 1–7.
65.
BaccoucheIJemmaliSManaiB, et al. Improved OCV model of a Li-ion NMC battery for online SOC estimation using the extended Kalman filter. Energies2017; 10(6): 1–22.
66.
KaiWXiaoFJinboP, et al. State of charge (SOC) estimation of lithium-ion battery based on adaptive square root unscented Kalman filter. Int J Electrochem Sci2020; 15(9): 9499–9516.
67.
LocorotondoECortiFPugiL, et al. Design of a wireless charging system for online battery spectroscopy. Energies2021, 14, 218.
68.
SuriGOnoriS. A control-oriented cycle-life model for hybrid electric vehicle lithium-ion batteries. Energy2016; 96: 644–653.
69.
GaoYJiangJZhangC, et al. Lithium-ion battery aging mechanisms and life model under different charging stresses. J Power Sources2017; 356: 103–114.
70.
ChenZSunMShuX, et al. Online state of health estimation for lithium-ion batteries based on support vector machine. Appl Sci2018; 8(6): 8060925.
71.
CaiLMengJStroeDI, et al. Multiobjective optimization of data-driven model for lithium-ion battery SOH estimation with short-term feature. IEEE Trans Power Electron2020; 35(11): 11855–11864.
72.
HuCJainGSchmidtC, et al. Online estimation of lithium-ion battery capacity using sparse Bayesian learning. J Power Sources2015; 289: 105–113.
73.
HeWWilliardNOstermanM, et al. Prognostics of lithium-ion batteries based on Dempster-Shafer theory and the Bayesian Monte Carlo method. J Power Sources2011; 196(23): 10314–10321.
74.
NgSSYXingYTsuiKL. A naive bayes model for robust remaining useful life prediction of lithium-ion battery. Appl Energy2014; 118: 114–123.
75.
ZhuJGSunZCWeiXZ, et al. A new lithium-ion battery internal temperature on-line estimate method based on electrochemical impedance spectroscopy measurement. J Power Sources2015; 274: 990–1004.
76.
SrinivasanRCarkhuffBGButlerMH, et al. Instantaneous measurement of the internal temperature in lithium-ion rechargeable cells. Electrochim Acta2011; 56(17): 6198–6204.
77.
ZhuJSunZWeiX, et al. Battery internal temperature estimation for LiFePO4 battery based on impedance phase shift under operating conditions. Energies2017; 10(1): en10010060.
78.
LiuKLiKDengJ. A novel hybrid data-driven method for li-ion battery internal temperature estimation. In: 2016 UKACC 11th international conference on control (Control), Belfast, UK, 31 Auguat–2 September 2016. IEEE.
79.
LiuKLiKPengQ, et al. Data-driven hybrid internal temperature estimation approach for battery thermal management. Complexity2018; 2018: 9642892.
80.
MillerJMPower electronics in hybrid electric vehicle applications. In: Eighteenth annual IEEE applied power electronics conference and exposition, 2003. APEC ’03, Miami Beach, FL, USA, 9–13 February 2003, vol. 1, no. C, pp.23–29. IEEE.
81.
SuboticIBodoNLeviE, et al. Overview of fast on-board integrated battery chargers for electric vehicles based on multiphase machines and power electronics. IET Electr Power Appl2016; 10(3): 217–229.
82.
XiaoBLuHWangH, et al. Enhanced regenerative braking strategies for electric vehicles: dynamic performance and potential analysis. Energies2017; 10: 1875.
83.
KarkiAPhuyalSTuladharD, et al. Status of pure electric vehicle power train technology and future prospects. Appl Syst Innov2020; 3(3): 1–28.
84.
KumarMSRevankarST. Development scheme and key technology of an electric vehicle: an overview. Renew Sustain Energy Rev2017; 70: 1266–1285.
85.
WuGZhangXDongZ. Powertrain architectures of electrified vehicles: review, classification and comparison. J Franklin Inst2015; 352(2): 425–448.
86.
ShurM. Wide band gap semiconductor technology: state-of-the-art. Solid State Electron2019; 155: 65–75.
87.
ZhangLYuanXWuX, et al. Performance evaluation of high-power SiC MOSFET modules in comparison to Si IGBT modules. IEEE Trans Power Electron2019; 34(2): 1181–1196.
88.
MoryaAMoosaviMGardnerMC, et al. Applications of Wide Bandgap (WBG) devices in AC electric drives: a technology status review. In: 2017 IEEE international electric machines and drives conference (IEMDC), Miami, FL, USA, 21-24May2017. IEEE.
89.
JinHQinLZhangL, et al. Review of wide band-gap semiconductors technology. MATEC Web Conf2016; 40: 1–5.
90.
KeshmiriNWangDAgrawalB, et al. Current status and future trends of GaN HEMTs in electrified transportation. IEEE Access2020; 8: 70553–70571.
91.
YamamotoMKakisakaTImaokaJ. Technical trend of power electronics systems for automotive applications. Jpn J Appl Phys2020; 59: ab75b9.
92.
DericioğluÇYirikEÜnalE, et al. A review of charging technologies for commercial electric vehicles. Int J Adv Automot Technol2018; 2(1): 61–70.
93.
ShiRSemsarSLehnPW. Constant current fast charging of electric vehicles via a DC grid using a dual-inverter drive. IEEE Trans Ind Electron2017; 64(9): 6940–6949.
94.
BrennaMFoiadelliFLeoneC, et al. Electric vehicles charging technology review and optimal size estimation. J Electr Eng Technol2020; 15(6): 2539–2552.
95.
RanabhatP. (2018). Secure design and development of IoT enabled charging infrastructure for electric vehicles; using CCS standard for DC fast charging. Metropolia University of Applied Sciences, Information Technology. http://urn.fi/URN:NBN:fi:amk-201804245337
96.
YilmazMKreinPT. Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles. IEEE Trans Power Electron2013; 28(5): 2151–2169.
97.
LongoMZaninelliDViolaF, et al. Recharge stations: a review. In: 2016 eleventh international conference on ecological vehicles and renewable energies (EVER), Monte Carlo, Monaco, 6–8 April 2016. IEEE.
98.
Smith, Margaret. Level 1 Electric Vehicle Charging Stations at the Workplace. United States: N. p., 2016. Web. doi:10.2172/1416120.
99.
FalvoMCSbordoneDBayramIS, et al. EV charging stations and modes: International standards. In: 2014 international symposium on power electronics, electrical drives, automation and motion, Ischia, Italy, 18–20 June 2014, pp.1134–1139. IEEE.
100.
AminATareenWUKUsmanM, et al. A review of optimal charging strategy for electric vehicles under dynamic pricing schemes in the distribution charging network. Sustain2020; 12(23): 1–28.
101.
HayajnehHSZhangX. Evaluation of electric vehicle charging station network planning via a co-evolution approach. Energies2019; 13(1): 1–11.
102.
ZhangYYouPCaiL. Optimal charging scheduling by pricing for EV charging station with dual charging modes. IEEE Trans Intell Transp Syst2019; 20(9): 3386–3396.
103.
DebSTammiKKalitaK, et al. Impact of electric vehicle charging station load on distribution network. Energies2018; 11(1): 1–25.
104.
DasHSRahmanMMLiS, et al. Electric vehicles standards, charging infrastructure, and impact on grid integration: a technological review. Renew Sustain Energy Rev2019; 120: 109618.
105.
Al-SaadiMAl-OmariAAl-ChlaihawiS, et al. Inductive power transfer for charging the electric vehicle batteries. EEA - Electroteh Electron Autom2018; 66(4): 29–39.
106.
ChenGRaoCSunY, et al. Primary control method of wireless charging system based on load characteristics. Energies2019; 12(7): 1–17.
107.
CortiFReattiAPieriniM, et al. A low-cost secondary-side controlled electric vehicle wireless charging system using a full-active rectifier. In: 2018 international conference of electrical and electronic technologies for automotive, Milan, Italy, 9–11 July 2018, pp.1–6. IEEE.
108.
Al-SaadiMAl-BahraniLAl-QaisiM, et al. Capacitive power transfer for wireless batteries charging. EEA - Electroteh Electron Autom2018; 66(4): 40–51.
109.
YiKHJungJYLeeBH, et al. Study on a capacitive coupling wireless power transfer with electric vehicle’s dielectric substrates for charging an electric vehicle. In: 19th European conference on power electronics and applications (EPE’17 ECCE Europe), Warsaw, Poland, 11–14 September 2017, vol. 2017-Janua, pp.2–8. IEEE.
110.
MakHYRongYShenZJM. Infrastructure planning for electric vehicles with battery swapping. Manage Sci2013; 59(7): 1557–1575.
111.
AhmadFAlamMSAlsaidanIS, et al. Battery swapping station for electric vehicles: opportunities and challenges. IET Smart Grid2020; 3(3): 280–286.
112.
InfanteWMaJHanX, et al. Optimal recourse strategy for battery swapping stations considering electric vehicle uncertainty. IEEE Trans Intell Transp Syst2020; 21(4): 1369–1379.
113.
SarkerMRPandžićHOrtega-VazquezMA. Optimal operation and services scheduling for an electric vehicle battery swapping station. IEEE Trans Power Syst2015; 30(2): 901–910.
114.
GengLLuZHeL, et al. Smart charging management system for electric vehicles in coupled transportation and power distribution systems. Energy2019; 189: 116275.
115.
WeiZLiYZhangY, et al. Intelligent parking garage EV charging scheduling considering battery charging characteristic. IEEE Trans Ind Electron2018; 65(3): 2806–2816.
116.
KhanZWMinxiaoHKaiC, et al. State of the Art DC-DC converter topologies for the multi-terminal DC Grid applications: a review. In: 2020 IEEE international conference on power electronics, smart grid and renewable energy (PESGRE2020), Cochin, India, 2–4 January 2020, pp.1–7. IEEE.
117.
MwasiluFJustoJJKimEK, et al. Electric vehicles and smart grid interaction: a review on vehicle to grid and renewable energy sources integration. Renew Sustain Energy Rev2014; 34: 501–516.
118.
NourMSaidSMAliA, et al. Smart charging of electric vehicles according to electricity price. In: 2019 international conference on innovative trends in computer engineering (ITCE), Aswan, Egypt, 2–4 February 2019, pp.432–437. IEEE.
119.
HarperGSommervilleRKendrickE, et al. Recycling lithium-ion batteries from electric vehicles. Nature2019; 575(7781): 75–86.
120.
D’AdamoIRosaP. A structured literature review on obsolete electric vehicles management practices. Sustain2019; 11(23): 1–17.
121.
AhmadiLYoungSBFowlerM, et al. A cascaded life cycle: reuse of electric vehicle lithium-ion battery packs in energy storage systems. Int J Life Cycle Assess2017; 22(1): 111–124.
122.
YanoJMuroiTIchi SakaiS. Rare earth element recovery potentials from end-of-life hybrid electric vehicle components in 2010–2030. J Mater Cycles Waste Manag2016; 18(4): 655–664.
123.
ElwertTGoldmannDRoemerF, et al. Recycling of NdFeB magnets from electric drive motors of (Hybrid) electric vehicles. J Sustain Metall2017; 3(1): 108–121.
124.
BulachWSchülerDSellinG, et al. Electric vehicle recycling 2020: key component power electronics. Waste Manag Res2018; 36(4): 311–320.
