Abstract
As one of the key components of machine tools, the dynamic characteristics of the ball screw feed system significantly affect machining accuracy and efficiency. In this paper, the acoustic black hole (ABH) concept is employed to effectively suppress the axial vibration of the ball screw feed system. An additional acoustic black hole (AABH) damper is designed to suppress low-frequency vibrations. To further enhance broadband vibration reduction performance, eccentric acoustic black hole (EABH) and slotted acoustic black hole (SABH) dampers are designed. Harmonic response analysis is performed, and the structural parameters are optimized using the finite element method (FEM). The coupling coefficients between the three types of ABH dampers and the ball screw feed system are calculated The vibration suppression effects of these dampers are validated experimentally. By comparing the amplitude level curve of the system with or without the installation of the ABH dampers, the results show that the maximum amplitude level decreases by 14.06, 27.02, and 23.73 dB, respectively. It is indicated that the three types of ABH dampers designed in this study effectively suppress axial vibration of the ball screw feed system over a wide frequency range, thereby improving the machining accuracy and efficiency of the machine tool.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
