This study investigated the performance of High-Velocity Oxygen Fuel (HVOF)-sprayed Titanium Carbide (TiC) and TiC + 50C (50%TiC + 50%CoNi) coatings on SS316 steel under three-body abrasion conditions. The microstructural analysis revealed a homogeneous distribution of TiC particles within the TiC coatings, while the TiC + 50C coatings exhibited a more complex microstructure due to the presence of Co-Ni alloy. Mechanical testing demonstrated the superior microhardness of TiC coatings compared to the SS316 substrate, suggesting enhanced wear resistance. Slurry abrasion tests indicated reduced mass loss rates for both TiC and TiC + 50C coatings compared to uncoated SS316 steel, with TiC coatings exhibiting superior resistance to abrasive wear. Post-abrasion examination revealed distinct wear patterns, including abrasive chipping, plowing marks, crater formation, wear traces, and surface ruggedness.
NabiSRatheeSSrivastavaM. Friction and wear analysis of Al-5052/NiTi surface composites fabricated via friction stir processing. Tribol Int2024; 191: 109179.
2.
WangYWangRLinJ, et al. Mechanical and high-temperature wear resistance properties of WC-reinforced AlCoCrFeNiTi0.5 high entropy alloy matrix composite. Ceram Int2024; 50(1): 2162–2176.
3.
VasudevHPrakashC. Surface engineering and performance of biomaterials. J Electrochem Sci Eng2023; 13(1): 1–3.
4.
RaghavendraCR. Wear behaviour of different nano particles coating on Al6061 substrate. Surf Eng2023; 39(1): 65–73.
5.
SinghVSinglaAKBansalA. Influence of laser texturing along with PTFE topcoat on slurry and cavitation erosion resistance of HVOF sprayed VC coating. Surf Coat Technol2023; 470: 129858.
6.
PatelPNairRBSupekarR, et al. Enhanced wear resistance of AlCoCrFeMo high entropy coatings (HECs) through various thermal spray techniques. Surf Coat Technol2024; 477: 130311.
7.
KumarVVermaR. Effect of GNP and laser-surface texturing on HVOF sprayed WC10Co4Cr coatings for high-wear resistance. Tribol Int2023; 178: 108057.
8.
JondaESzalaMSrokaM, et al. Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying. Appl Surf Sci2023; 608: 155071.
9.
BolelliGLyphoutCBergerLM, et al. Wear resistance of HVOF- and HVAF-sprayed (Ti,Mo)(C,N)–Ni coatings from an agglomerated and sintered powder. Wear2023; 512-513: 204550.
10.
KumarRSharmaSSinghJP, et al. Enhancement in wear-resistance of 30MNCRB5 boron steel-substrate using HVOF thermal sprayed WC–10%Co–4%Cr coatings: a comprehensive research on microstructural, tribological, and morphological analysis. J Mater Res Technol2023; 27: 1072–1096.
11.
KumarNChoubeyVK. Experimental investigation on hot corrosion, oxidation and microstructure of WC based cermet HVOF coating. High Temp Corros Mater2023; 101: 413–432.
12.
Venkate GowdaCNagarajaTKYogeshaKB, et al. Study on structural behavior of HVOF-sprayed NiCr/Mo coating. J Inst Eng (India) Ser D. Epub ahead of print 25 January 2024. DOI: 10.1007/s40033-024-00641-8.
13.
PrasadCDKollurSNusrathullaM, et al. Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process. Trans IMF2024; 102(1): 22–28.
14.
RussellZGaierMFroningMJ, et al. The aqueous corrosion and wear responses of HVOF-deposited TiC-Ni3Al, WC-Co, and WC-CoCr coatings on AISI 4130 steel substrates. Surf Coat Technol2023; 473: 130018.
15.
SinghVSinglaAKBansalA. Influence of TiC content on slurry erosion behaviour of HVOF sprayed titanium carbide and cupronickel-chromium based coatings. J Therm Spray Technol2023; 32(6): 1739–1757.
16.
SinghVBansalASinglaAK. Slurry erosion behaviour of HVOF sprayed VC+TiC based novel coatings: characterization and optimization studies. Tribol Int2023; 180: 108289.
17.
SinghVSinglaAKBansalA. Enhanced erosion resistance of HVOF-deposited laser-textured TiC coating with PTFE. Surf Eng2023; 39(7-12): 816–822.
18.
WangYWangHZhaoZ, et al. Wear and corrosion resistant HVOF-sprayed WC-xCr3C2-8Co-6Ni coatings produced from pre-alloyed powder. Surf Coat Technol2023; 473: 129989.
19.
NutorRKCaoQWangX, et al. Accelerated emergence of CoNi-based medium-entropy alloys with emphasis on their mechanical properties.Curr. Opin. Solid State Mater. Sci2022; 26(6): 101032.
20.
DolekerKMKaraoglanliAC. High-temperature oxidation effect on high-velocity oxygen liquid fuel and laser-remelted high-velocity oxygen liquid fuel MCrAlY coatings. J Mater Eng Perform. Epub ahead of print 20 September 2023. DOI: 10.1007/s11665-023-08742-3.
GovandeARChandakASunilBR, et al. Carbide-based thermal spray coatings: a review on performance characteristics and post-treatment. Int J Refract Metals Hard Mater2022; 103: 105772.
23.
HeDYFuBYJiangJM, et al. Microstructure and wear performance of arc sprayed Fe-FeB-WC coatings. J Therm Spray Technol2008; 17: 757–761.
24.
WangBQ. Hot erosion behavior of two new iron-based coatings sprayed by HVCC process. Wear2003; 255(1-6): 102–109.
25.
KrishnaSANobleNRadhikaN, et al. A comprehensive review on advances in high entropy alloys: fabrication and surface modification methods, properties, applications, and future prospects. J Manuf Process2024; 109: 583–606.
26.
YuanbinZPingZHaominL, et al. The effect of Ti and B4C on the microstructure and properties of the laser clad FeCoCrNiMn based high entropy alloy coating. Surf Coat Technol2022; 441: 128499.
27.
HongSWangZLinJ, et al. Hydro-abrasive erosion behaviors of HVOF sprayed carbide-based cermet coatings in simulated seawater slurries. Tribol Int2023; 177: 108001.
28.
RibuDCRajeshRThirumalaikumarasamyD, et al. Experimental investigation of erosion corrosion performance and slurry erosion mechanism of HVOF sprayed WC-10Co coatings using design of experiment approach. J Mater Res Technol2022; 18: 293–314.
29.
RaushanHBansalASinghV, et al. Dry sliding and slurry abrasion behaviour of wire arc additive manufacturing – cold metal transfer (WAAM-CMT) cladded inconel 625 on EN8 steel. Tribol Int2023; 179: 108176.
30.
NatsisAPapadakisGPitsilisJ. The influence of soil type, soil water and share sharpness of a mouldboard plough on energy consumption, rate of work and tillage quality. J Agric Eng Res1999; 72(2): 171–176.
