A novel cable-net buffer device for recovering reusable launch vehicle: Design,dynamic modeling,and performance analysis

Abstract

At present, reusable launch vehicle technology (RLV) has become a research hotspot in the aerospace field and one of the major development trends in this industry. With reference to the aircraft carrier’s arresting cable technology, this paper puts forward a novel cable-net buffer device for recovering the first stage of launch vehicle. The device can transfer load through a cable-pulley mechanism, and then complete the first stage recovery by losing the kinetic energy and gravitational potential energy of the first stage through hydraulic dampers and preloaded counterweights. In order to analyze the performance of this cable-net buffer device, the finite element software ABAQUS is adopted to establish a rigid-flexible coupling dynamic model. In this model, the cable-pulley mechanism is simulated by connector and shell elements, the damping force of the hydraulic dampers by VUAMP subroutine, and the preloaded counterweights by mass point. And then, performance evaluation indexes of this buffer device are proposed in this paper. Meanwhile, the dynamic simulation, using the established dynamic model, is carried out under different device design parameters and working condition parameters. On the one hand, the simulation results show that the tower span and damping force have remarkable effects on the buffer performance. On the other hand, among all working condition parameters, only the fall point deviation has a significant effect on the buffer performance, but this effect is less than that of the design parameters. Finally, combing the dynamic model and the surrogate model technique, this paper obtains feasible boundaries of design parameters of the device for the subsequent detailed design of it. Researches in this paper will provide new ideas for the development of RLV.

Keywords

Cable-net buffer device reusable launch vehicle principle design dynamic modeling simulation analysis

Get full access to this article

View all access options for this article.

References

Baiocco

. Overview of reusable space systems with a look to technology aspects. Acta Astronaut 2021; 189: 10–25.

Liu

, et al. Analysis of the development of reusable launch vehicles in the United States. Space Int 2020; 12: 38–45 (in Chinese).

Meyerson

Taylor

. A status report on the development of the Kistler Aerospace K-1 Reusable Launch Vehicle. In: 16th AIAA aerodynamic decelerator systems technology conference and seminar, Boston, MA, 21–24 May 2001.

Ledsinger

Olds

. Optimized solutions for Kistler K-1 branching trajectories using multidisciplinary design optimization techniques. J Spacecr Rockets 2015; 39: 420–429.

Fagan

McInerney

Johnston

, et al. Kistler reusable vehicle facility design and operational approach. Acta Astronaut 2003; 52: 563–573.

Zhao

. Ariane-5 Booster recovery system. Spacecr Recovery Remote Sens 1996; 4: 1–7 (in Chinese).

Wang

Gao

, et al. Progress and prospect of reusable launch vehicle technology. Missiles Space Veh 2017; 5: 1–7 (in Chinese).

Meiboom

. Design and development of the recovery system for the Ariane-5 boosters. In: 11th, aerodynamic decelerator systems technology conference, San Diego, CA, 09–11 April 1991.

Wang

Zhu

Cui

, et al. Analysis on the innovation and development route of launch technology of foreign launch vehicles. Space Int 2022; 5: 40–45 (in Chinese).

10.

Yang

Lin

. Latest development of reusable rocket in Russia. Aerosp China 2022; 6: 53–57 (in Chinese).

11.

Donahue

Weldon

Paris

. Low recurring cost, partially reusable heavy lift launch vehicle. J Spacecr Rockets 2008; 45: 90–94.

12.

Cook

Hueter

. NASA’s integrated space transportation plan - 3rd generation reusable launch vehicle technology update. Acta Astronaut 2003; 53: 719–728.

13.

Xun

. American delta fast sail single stage to orbit launch vehicle. Missiles Space Veh 1995; 3: 72–77 (in Chinese).

14.

Blackmore

. Autonomous precision landing of space rockets. Bridge (Kans City) 2016; 46: 15–20.

15.

Cui

Wei

, et al. Development and key technologies of vertical takeoff vertical landing reusable launch vehicle. Astronaut Syst Eng Technol 2018; 2: 27–42 (in Chinese).

16.

Tian

Gao

, et al. Configuration design and scale optimization of the support legs of a vertical take-off and landing vehicle. J Mech Eng 2021; 57: 33–44 (in Chinese).

17.

Tian

Gao

, et al. Design and deployment control of landing leg for a vertical takeoff and landing vehicle. J Mech Eng 2020; 56: 171–181 (in Chinese).

18.

Nie

Yang

Nie

, et al. Design and simulation analysis of the development locking mechanism of vertical take-off and landing vehicle. Mach Des Manuf Eng 2020; 19: 61–66 (in Chinese).

19.

Xiao

Zhang

Yue

, et al. Design and analysis on new landing support of vertical takeoff/landing launch vehicle. Mach Des Manuf Eng 2017; 46: 30–35 (in Chinese).

20.

Deng

, et al. Simulation analysis and test verification of reusable launch vehicle recovery landing based on airbag buffer. Missiles Space Veh 2022; 3: 8–11+59 (in Chinese).

21.

Jiang

Rong

Teng

, et al. Dynamical simulation analysis for booster recovery with parafoil system. J Ordnance Equip Eng 2017; 38: 6–13 (in Chinese).

22.

Xiong

Zhang

Chen

, et al. Dynamic simulation analysis on stabilization and deceleration stage of rocket booster recovery. Flight Dyn 2021; 39: 63–70 (in Chinese).

23.

Wang

Gao

, et al. Landing dynamics modeling and stability analysis of vertical-landing carrier. J Mech Eng 2020; 56: 37–47 (in Chinese).

24.

Wang

Chen

Jia

, et al. Parameterized design and dynamic analysis of a reusable launch vehicle landing system with semi-active control. Symmetry (Basel) 2020; 12: 1572.

25.

Yue

Lin

, et al. Analysis of quasi-three-dimensional landing dynamics and attenuation performance under extreme conditions for launch vehicle. J Mech Eng 2021; 57: 22–33 (in Chinese).

26.

Yue

Lin

, et al. Analysis on deployment characteristics and influence factors of landing gear for launch vehicle. J Astronaut 2021; 42: 697–709 (in Chinese).

27.

Yang

Liu

Shi

. Dynamic simulation of VTVL reusable launch vehicle soft-landing. Sci Technol Eng 2017; 17: 329–334 (in Chinese).

28.

Lei

Zhang

Yue

. Design and optimization of a crashworthy damper used for reusable launch vehicles. J Astronaut 2019; 40: 996–1005 (in Chinese).

29.

Wang

. A comprehensive performance optimization method for the honeycomb buffer of a legged-type lander. Aircr Eng Aerosp Technol 2021; 93: 821–831.

30.

Wang

Ding

, et al. Optimization design of a landing gear under uncertain landing attitude. J Astronaut 2018; 39: 1323–1331 (in Chinese).

31.

Wang

Ding

, et al. Configuration optimization of landing gear under two kinds of landing modes. J Astronaut 2017; 38: 1032–1040 (in Chinese).

32.

Wang

Ding

, et al. Soft landing performance optimization for novel lander based on multiple working conditions. J Beijing Univ Aeronaut Astronaut 2017; 43: 776–781 (in Chinese).

33.

Wang

, et al. Multi-layerdesign method of tension rope for paraboloid antenna. J Beijing Univ Aeronaut Astronaut 2022; 48: 657–664 (in Chinese).

34.

Chen

, et al. Application of user subroutine UAMP of ABAOUS. J Sichuan Ordnance 2014; 35: 149–152.

35.

Niu

Wang

, et al. Prediction method of permissible error ranges of control parameters for underwater gliders under given operation accuracy. Appl Ocean Res 2020; 103: 102153.