Compilation of load spectrum of CNC machine tools reliability test program based on Weibull kernel function

Abstract

The load spectrum is the foundational data for reliability tests that simulate actual working conditions. Determining typical working conditions and accurate load extrapolation are the key to the load spectrum. This paper proposes a method for compiling the load spectrum of a reliability test program of CNC machine tools based on Weibull kernel function. The aforementioned method aims to address the issues commonly encountered in the load spectrum, such as complex factors that affect typical working conditions, heterogeneous load data of working conditions, and reliance on assumption distribution during load extrapolation. The method involves a determination process for typical working conditions using the Weibull kernel function and a non-parametric load extrapolation method based on kernel function. Firstly, this paper proposes a kernel density estimation method based on Weibull kernel function to address the issues of probability density contribution value deviation caused by the inconsistency between the conventional kernel function symmetry and the off-peak characteristic of load. The approach is based on the physical meaning and generalization of the Weibull distribution parameters and is used to determine the typical working conditions of CNC machine tools. Secondly, this paper proposes a nonparametric rainflow extrapolation method for cutting loads of CNC machine tools based on two-dimensional kernel density estimation. The approach takes advantage of the nonparametric rainflow extrapolation method and considers the characteristics of the cutting load. And the load spectrum of the three-dimensional cutting force of the CNC machine tool is constructed using the mean-range probability density distribution of the cutting load. Finally, the reliability test program loading spectrum of CNC machine tools is determined using the Conover ratio coefficient. Through case analysis, it can be known that the nuclear density estimation method proposed in this paper can improve the compilation accuracy of the load spectrum and has practical application significance.

Keywords

Load spectrum Weibull kernel function typical working conditions load extrapolation reliability test program loading spectrum

Get full access to this article

View all access options for this article.

References

Zheng

Pan

Chen

, et al. Methods for editing random load spectra based on multi-parameter index preservation for accelerated durability testing. Proc IMechE, Part C: J Mechanical Engineering Science 2022; 236(14): 7657–7673.

Sun

Dui

. Investigation on fatigue damage equivalence probability for the structure with similar fatigue hazardous detail parts. Proc IMechE, Part C: J Mechanical Engineering Science 2022; 236(10): 5535–5544.

Wang

, et al. Compilation method of CNC lathe cutting force spectrum based on kernel density estimation of G-SCE. Int J Adv Manuf Technol 2023; 124: 3713–3724.

Zhao

, et al. Time domain load extrapolation method for CNC machine tools based on GRA-POT model. J Adv Manuf Technol 2019; 103(9–12): 3799–3812.

Gassner

. Strength tests under repeated loading for aeronotical engineering. Luftwiss 1939; 6: 61–64.

Chen

Yang

, et al. Load spectrum generation of machining center based on rainflow counting method. J Vibroengineering 2017; 19: 5767–5779.

Wang

, et al. Compilation of NC lathe dynamic cutting force spectrum based on two-dimensional mixture models. J Adv Manuf Technol 2018; 98(1–4): 251–262.

Kim

Kang

, et al. Ice load generation in time domain based on ice load spectrum for Arctic offshore structures. J Ocean Eng Technol 2018; 32: 411–418.

Roquet

Gamez-Montero

Castilla

, et al. A simplified methodology to evaluate the design specifications of hydraulic components. Appl Sci 2018; 8(9): 1612.

10.

Martínez-Arellano

Terrazas

Ratchev

. Tool wear classification using time series imaging and deep learning. Int J Adv Manuf Technol 2019; 104(9–12): 3647–3662.

11.

Imad

Hopkins

Hosseini

, et al. Intelligent machining: a review of trends, achievements and current progress. Int J Comput Integr Manuf 2022; 35(4–5): 359–387.

12.

Prabhu

Muhandri

Song

, et al. Decision support system enabled by depth imaging sensor data for intelligent automation of moving assemblies. Proc IMechE, Part C: J Mechanical Engineering Science 2018; 232(1): 51–66.

13.

Yaghoubi

Vakilzadeh

Abrahamsson

TJS

. Automated modal parameter estimation using correlation analysis and bootstrap sampling. Mech Syst Signal Process 2018; 100: 289–310.

14.

Blecha

Holub

Marek

, et al. Capability of measurement with a touch probe on CNC machine tools. Measurement 2022; 195: 111153.

15.

Dhanda

Kukreja

Pande

. Adaptive spiral tool path generation for computer numerical control machining using point cloud. Proc IMechE, Part C: J Mechanical Engineering Science 2021; 235(22): 6240–6256.

16.

Qiu

Wei

, et al. Strategy for determining analysis working conditions of Hydraulic excavator. Adv Mater Res 2013; 838–841: 487–493.

17.

Jiang

Jin

Luo

. Power prediction of hybrid power scraper based on conditions recognition and Markov chain. J China Coal Soc 2019; A1: 330–337.

18.

Heng-qui

. Determination method of equipment typical damage test condition based on spatial clustering. J Acad Armored Force Eng 2016; 30(2): 1672–1497.

19.

Wang

, et al. Compilation of load spectrum of machining center spindle and application in fatigue life prediction. J Mech Sci Technol 2019; 33(4): 1603–1613.

20.

Yang

Chen

, et al. Improved multi-wavelet denoising with neighboring coefficients of cutting force for application in the load spectrum of computer numerical control lathe. Adv Mech Eng 2018; 10(2): 60–70.

21.

Johannesson

Thomas

. Extrapolation of rainflow matrices. Extremes 2001; 4(3): 241–262.

22.

Yang

Song

Yin

, et al. Time domain extrapolation method for load of drive shaft of high-power tractor based on POT model. Trans Chin Soc Agric Eng 2019; 35(15): 40–47.

23.

Carboni

Cerrini

Johannesson

, et al. Load spectra analysis and reconstruction for hydraulic pump components. Fatigue Fract Eng Mater Struct 2008; 31: 251–261.

24.

Ragan

Manuel

. Statistical extrapolation methods for estimating wind turbine extreme loads. J Sol Energy Eng 2008; 130(3): 031011.

25.

Kowalewski

. Beschreibung regelloser vorgange. Fortschr-Ber VDI-Z. 1969; 5(7): 7–27.

26.

Nagode

Fajdiga

. The influence of variable operating conditions upon the general multi-modal Weibull distribution. Int J Fatigue 1999; 64(3): 383–389.

27.

Nagode

Klemenc

Fajdiga

. Parametric modelling and scatter prediction of rainflow matrices. Int J Fatigue 2001; 23(6): 525–532.

28.

Lin

Hall

Stilman

. Development of customer usage profile histograms. Int J Mater Prod Technol 2001; 16(4–5): 393–403.

29.

Liu

Zhang

Wang

, et al. Fatigue life analysis of automotive key parts based on improved peak-overthreshold method. Fatigue Fract Eng Mater Struct 2020;43(8): 1824–1836

30.

Xiong

, et al. Improved logistic regression algorithm based on kernel density estimation for multi-classification with non-equilibrium samples. Comput Mater Continua 2019; 61(1): 103–118.

31.

Han

Liang

. Sparse kernel density estimations and its application in variable selection based on quadratic Renyi entropy. Neurocomputing 2011; 74(10): 1664–1672.

32.

Parzen

. On estimation of a probability density function and mode. Ann Math Stat 1962; 33(3): 1065–1076.

33.

Craiu

Gustafson

Rosenthal

. Reflections on Bayesian inference and Markov chain Monte Carlo. Can J Stat 2022; 50: 1213–1227.

34.

Zhu

Wei

Zhang

. Preparation and transformation of the road test load spectrum of automobile ControlArm. J Anhui Univ Technol 2016; 33(1): 58–63.