Abstract
In rotating machinery with a flexible foundation used for vibration isolation, the drive (motor) is designed to provide maximum power at the critical speed so that the rotor can be coasted up to a supercritical operating speed. Over the time, rotors develop some degree of unbalance and it may be impossible to balance the rotors in-situ, such as in a wind turbine. Therefore, oversized motors are used in anticipation of some unbalance. To promote passage through resonance, without altering the motor, various kinds of additional hardware and/or control mechanisms have been proposed in the past. On the other hand, simply increasing the foundation (or structural) damping reduces the amplitude of unbalance induced vibrations and the motor power requirement at the critical speed. This appears to be the simplest possible solution and has been proposed in relevant mathematical research. However, it is shown in this article that increasing foundation damping significantly reduces the overall system efficiency at the supercritical operating speed and it should not be at all considered as a meaningful engineering solution. In fact, the loss of efficiency due to the increased foundation damping is so large that it may not be compensated by a redesigned motor.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
