In various applications such as air conditioning, refrigeration, central heating, and chemical processing, heat losses due to thermal resistance are of considerable amount. To improve the thermo-hydraulic performance of the system involved in such applications, it is required to reduce the thermal resistance. This review article focuses on the works related to heat transfer enhancement using two types of surface roughness that are ribs and corrugations. Ribs and corrugations reduce thermal resistance by increasing surface area and creating perturbation in the flow field. This review article covers various experimental, analytical, and numerical studies related to the thermo-hydraulic performance of different working fluids flowing through the channels incorporated with surface roughness. The effects of using different working fluids that are conventional fluids, nanofluids, and hybrid nanofluids on the heat transfer performance of channels with surface roughness are also studied. Authors believe that this article will provide a basis for the advanced research on the thermo-hydraulic performance assessment of the nanofluids and hybrid nanofluids in the ribbed and corrugated channels, which will help in the enhancement of the performance of the system comprising the application of such channels.
ChaurasiaSRSarviyaRM. Numerical and experimental thermal performance with entropy generation analysis on tube with helical screw tape inserts at number of strips in turbulent flow. Proc Inst Mech Eng Part C: J Mech Eng Sci2022; 35(6): 1057–1070.
2.
ChaurasiaSRSarviyaRM. Experimental and numerical thermal performance analysis with exergy destruction on nanofluid flow in tube with double strip helical screw inserts. Proc Inst Mech Eng Part A: J Power Energy2021; 235: 0957650920982149.
3.
ChaurasiaSRSarviyaRM. Comparative thermal hydraulic performance analysis on helical screw insert in tube with different number of strips in transition flow regime. Heat Mass Transfer2021; 57(1): 77–91.
4.
MaradiyaCVadherJAgarwalR. The heat transfer enhancement techniques and their thermal performance factor. Beni-Suef Univ J Basic Appl Sci2018; 7(1): 1–21.
5.
ChaurasiaSRSarviyaRM. Thermal performance analysis of CuO/water nanofluid flow in a pipe with single and double strip helical screw tape. Appl Therm Eng2020; 166: 114631.
6.
ChaurasiaSRSarviyaR. Experimental analysis on thermal and friction factor characteristics of fluid flow in tube with novel double strip helical screw tape. Proc Inst Mech Eng Part A: J Power Energy2020; 234(6): 874–886.
7.
KumarKKumarRBharjRS, et al.Irreversibility analysis of the convective flow through corrugated channels: a comprehensive review. The Eur Phys J Plus2021; 136(4): 1–40.
8.
ChaurasiaSRSarviyaRM. Experimental thermal performance analysis of fluid flow in a heat exchanger pipe with novel double strip helical screw tape inserts for utilization of energy resources. Energy Sourc Part A: Recovery, Utilization, Environ Effects2019; ■■■: 1–14.
9.
ChaurasiaSRSarviyaRM. Thermal performance with entropy generation analysis of fluid flow in a heat exchanger pipe with single and double strip helical screw tape inserts. ASME Power Conf2020; ■■■: 83747V001T01A002.
10.
LiuSSakrM. A comprehensive review on passive heat transfer enhancements in pipe exchangers. Renew Sustainable Energy Rev2013; 19: 64–81.
11.
MousaMHMiljkovicNNawazK. Review of heat transfer enhancement techniques for single phase flows. Renew Sustainable Energy Rev2021; 137: 110566.
12.
ChaurasiaSRSarviyaRM. Thermohydraulic analysis on helical screw insert at different strips with nanofluid. J Thermophys Heat Transfer2020; 34(4): 816–825.
13.
KumarAKimM-H. Thermohydraulic performance of rectangular ducts with different multiple V-rib roughness shapes: a comprehensive review and comparative study. Renew Sustainable Energy Rev2016; 54: 635–652.
14.
SharmaSKKalamkarVR. Thermo-hydraulic performance analysis of solar air heaters having artificial roughness – a review. Renew Sustainable Energy Rev2015; 41: 413–435.
15.
WangGVankaSP. Convective heat transfer in periodic wavy passages. Int J Heat Mass Transfer1995; 38(17): 3219–3230.
16.
MehtaSKPatiS. Analysis of thermo-hydraulic performance and entropy generation characteristics for laminar flow through triangular corrugated channel. J Therm Anal Calorim2019; 136(1): 49–62.
17.
GaiserGKottkeV. Effects of corrugation parameters on fluid mixing characteristics in corrugated passages. Phys Fluids A: Fluid Dyn1991; 3: 1465.
18.
ChaurasiaSRSarviyaRM. Thermal performance analysis of CuO nanofluid flow in a pipe with helical screw twist tape. Mater Today Proc2019; 18: 3546–3555.
19.
MaxwellJC. A treatise on electricity and magnetism. 2nd ed.Oxford, UK: Clarendon Press, 1881.
20.
DasSKChoiSUYuW, et al.Nanofluids: science and technology. ■■■: John Wiley & Sons, 2007.
21.
ChoiSUEastmanJA. Enhancing Thermal conductivity of fluids with nanoparticles (No. ANL/MSD/CP-84938; CONF-951135-29). IL (United States): Argonne National Lab, 1995.
22.
ChaurasiaSRSarviyaRM. Comparative thermal performance analysis with entropy generation on helical screw insert in tube with number of strips with nanofluid at laminar flow regime. Int Commun Heat Mass Transfer2021; 122: 105138.
23.
ChaurasiaSRSarviyaRM. Comparative thermal performance analysis on helical screw insert in tube with number of strips with nanofluid at laminar flow regime. J Therm Sci Eng Appl2021; 13(1): 011017.
24.
KumarKKumarRBharjRS. Entropy generation analysis due to heat transfer and nanofluid flow through microchannels: a review. Int J Exergy2020; 31(1): 49–86.
25.
TyagiPKKumarRMondalPK. A review of the state-of-the-art nanofluid spray and jet impingement cooling. Phys Fluids2020; 32(12): 121301.
26.
BabuJRKumarKKRaoSS. State-of-art review on hybrid nanofluids. Renew Sustainable Energy Rev2017; 77: 551–565.
27.
SidikNACAdamuIMJamilMM, et al.Recent progress on hybrid nanofluids in heat transfer applications: a comprehensive review. Int Commun Heat Mass Transfer2016; 78: 68–79.
28.
SidikNACJamilMMJaparWMAA, et al.A review on preparation methods, stability and applications of hybrid nanofluids. Renew Sustainable Energy Rev2017; 80: 1112–1122.
29.
SarkarJGhoshPAdilA. A review on hybrid nanofluids: recent research, development and applications. Renew Sustainable Energy Rev2015; 43: 164–177.
30.
EsfeMHAlirezaieARejvaniM. An applicable study on the thermal conductivity of SWCNT-MgO hybrid nanofluid and price-performance analysis for energy management. Appl Therm Eng2017; 111: 1202–1210.
31.
LiSZhangHChengJ, et al.A state-of-the-art overview on the developing trend of heat transfer enhancement by single-phase flow at micro scale. Int J Heat Mass Transfer2019; 143: 118476.
32.
ChaurasiaSRSarviyaRM. Experimental and numerical thermal performance evaluation of helical screw inserts in a tube with double strips at laminar flow. Comput Therm Sci An Int J2021; 13(1).
33.
ChaurasiaSRSarviyaRM. Thermal-hydraulic performance analysis of fluid flow in tube with helical screw inserts in transition flow. ASME Int Conf Nucl Eng2020; 83785: V003T13A035.
34.
AhmedHEMohammedHAYusoffMZ. An overview on heat transfer augmentation using vortex generators and nanofluids: approaches and applications. Renew Sustainable Energy Rev2012; 16(8): 5951–5993.
35.
GawandeVBDhobleASZodpeDB. Effect of roughness geometries on heat transfer enhancement in solar thermal systems–a review. Renew Sustainable Energy Rev2014; 32: 347–378.
36.
LanjewarAMBhagoriaJLAgrawalMK. Review of development of artificial roughness in solar air heater and performance evaluation of different orientations for double arc rib roughness. Renew Sustainable Energy Rev2015; 43: 1214–1223.
37.
SheikholeslamiMGorji-BandpyMGanjiDD. Review of heat transfer enhancement methods: focus on passive methods using swirl flow devices. Renew Sustainable Energy Rev2015; 49: 444–469.
38.
MohammedKATalibAANurainiAA, et al.Review of forced convection nanofluids through corrugated facing step. Renew Sustainable Energy Rev2017; 75: 234–241.
39.
HuminicGHuminicA. Hybrid nanofluids for heat transfer applications–a state-of-the-art review. Int J Heat Mass Transfer2018; 125: 82–103.
40.
SalmanSTalibARASaadonS, et al.Hybrid nanofluid flow and heat transfer over backward and forward steps: a review. Powder Technol2020; 363: 448–472.
41.
MuneeshwaranMSrinivasanGMuthukumarP, et al.Role of hybrid-nanofluid in heat transfer enhancement–a review. Int Commun Heat Mass Transfer2021; 125: 105341.
42.
BuchlinJ-M. Convective heat transfer in a channel with perforated ribs. Int J Therm Sci2002; 41(4): 332–340.
43.
WangLSundénB. Experimental investigation of local heat transfer in a square duct with continuous and truncated ribs. Exp Heat Transfer2005; 18(3): 179–197.
44.
WangLSundénB. Experimental investigation of local heat transfer in a square duct with various-shaped ribs. Heat Mass Transfer2007; 43(8): 759–766.
45.
ChungHParkJSParkS, et al.Augmented heat transfer with intersecting rib in rectangular channels having different aspect ratios. Int J Heat Mass Transfer2015; 88: 357–367.
46.
TamnaSKaewkohkiatYSkullongS, et al.Heat transfer enhancement in tubular heat exchanger with double V-ribbed twisted-tapes. Case Stud Therm Eng2016; 7: 14–24.
47.
AlfarawiSAbdel-MoneimSABodalalA. Experimental investigations of heat transfer enhancement from rectangular duct roughened by hybrid ribs. Int J Therm Sci2017; 118: 123–138.
48.
DengHLiYTaoZ, et al.Pressure drop and heat transfer performance in a rotating two-pass channel with staggered 45-deg ribs. Int J Heat Mass Transfer2017; 108: 2273–2282.
49.
YangWXueSHeY, et al.Experimental study on the heat transfer characteristics of high blockage ribs channel. Exp Therm Fluid Sci2017; 83: 248–259.
50.
AljiboryMWRashidFLAlaisSMA. An experimental and numerical investigation of heat transfer enhancement using annular ribs in a tube. IOP Conf Ser Mater Sci Eng2018; 433: 012057.
51.
JiangGShiXChenG, et al.Study on flow and heat transfer characteristics of the mist/steam two-phase flow in rectangular channels with 60 deg. ribs. Int J Heat Mass Transfer2018; 120: 1101–1117.
52.
WangGQianNDingG. Heat transfer enhancement in microchannel heat sink with bidirectional rib. Int J Heat Mass Transfer2019; 136: 597–609.
53.
MoonM-AParkM-JKimK-Y. Evaluation of heat transfer performances of various rib shapes. Int J Heat Mass Transfer2014; 71: 275–284.
54.
LiuJHussainSWangJ, et al.Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4: 1) with ribs of various truncation types and arrangements. Int J Therm Sci2018; 123: 99–116.
55.
WangYZhouBLiuZ, et al.Numerical study and performance analyses of the mini-channel with discrete double-inclined ribs. Int J Heat Mass Transfer2014; 78: 498–505.
56.
XieGLiuJLigraniPM, et al.Flow structure and heat transfer in a square passage with offset mid-truncated ribs. Int J Heat Mass Transfer2014; 71: 44–56.
57.
ChaiLXiaGDWangHS. Numerical study of laminar flow and heat transfer in microchannel heat sink with offset ribs on sidewalls. Appl Therm Eng2016; 92: 32–41.
58.
GhaniIASidikNACMamatR, et al.Heat transfer enhancement in microchannel heat sink using hybrid technique of ribs and secondary channels. Int J Heat Mass Transfer2017; 114: 640–655.
59.
RaviBVSinghPEkkadSV. Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels. Int J Therm Sci2017; 112: 31–43.
60.
XieGLiuXYanH, et al.Turbulent flow characteristics and heat transfer enhancement in a square channel with various crescent ribs on one wall. Int J Heat Mass Transfer2017; 115: 283–295.
61.
ZhengNLiuPLiuZ, et al.Numerical simulation and sensitivity analysis of heat transfer enhancement in a flat heat exchanger tube with discrete inclined ribs. Int J Heat Mass Transfer2017; 112: 509–520.
62.
Al KumaitAARIbrahimTKAbdullahMA. Experimental and numerical study of forced convection heat transfer in different internally ribbed tubes configuration using TiO2 nanofluid. Heat Transfer—Asian Res2019; 48(5): 1778–1804.
63.
MancaONardiniSRicciD. A numerical study of nanofluid forced convection in ribbed channels. Appl Therm Eng2012; 37: 280–292.
64.
MohammedHAAl-ShamaniANSheriffJM. Thermal and hydraulic characteristics of turbulent nanofluids flow in a rib–groove channel. Int Commun Heat Mass Transfer2012; 39(10): 1584–1594.
65.
MohebbiKRafeeRTalebiF. Effects of rib shapes on heat transfer characteristics of turbulent flow of Al2O3-water nanofluid inside ribbed tubes. Iranian J Chem Chem Eng (IJCCE)2015; 34(3): 61–77.
66.
VanakiSMMohammedHA. Numerical study of nanofluid forced convection flow in channels using different shaped transverse ribs. Int Commun Heat Mass Transfer2015; 67: 176–188.
67.
AkbariOAToghraieDKarimipourA, et al.Investigation of rib's height effect on heat transfer and flow parameters of laminar water–Al2O3 nanofluid in a rib-microchannel. Appl Mathematics Comput2016; 290: 135–153.
68.
AlipourHKarimipourASafaeiMR, et al.Influence of T-semi attached rib on turbulent flow and heat transfer parameters of a silver-water nanofluid with different volume fractions in a three-dimensional trapezoidal microchannel. Physica E: Low-Dimensional Syst Nanostructures2017; 88: 60–76.
69.
BehnampourAAkbariOASafaeiMR, et al.Analysis of heat transfer and nanofluid fluid flow in microchannels with trapezoidal, rectangular and triangular shaped ribs. Physica E: Low-Dimensional Syst Nanostructures2017; 91: 15–31.
70.
GravndyanQAkbariOAToghraieD, et al.The effect of aspect ratios of rib on the heat transfer and laminar water/TiO2 nanofluid flow in a two-dimensional rectangular microchannel. J Mol Liquids2017; 236: 254–265.
71.
PourfattahFMotamedianMSheikhzadehG, et al.The numerical investigation of angle of attack of inclined rectangular rib on the turbulent heat transfer of Water-Al2O3 nanofluid in a tube. Int J Mech Sci2017; 131: 1106–1116.
72.
ShamsiMRAkbariOAMarzbanA, et al.Increasing heat transfer of non-Newtonian nanofluid in rectangular microchannel with triangular ribs. Physica E: Low-Dimensional Syst Nanostructures2017; 93: 167–178.
73.
Bazdidi-TehraniFKhabazipurAVasefiSI. Flow and heat transfer analysis of TiO2/water nanofluid in a ribbed flat-plate solar collector. Renew Energy2018; 122: 406–418.
74.
ParsaiemehrMPourfattahFAkbariOA, et al.Turbulent flow and heat transfer of Water/Al2O3 nanofluid inside a rectangular ribbed channel. Physica E: Low-Dimensional Syst Nanostructures2018; 96: 73–84.
75.
SalmanSD. Comparative study on heat transfer enhancement of nanofluids flow in ribs tube using CFD simulation. Heat Transfer-Asian Res2019; 48(1): 148–163.
76.
AhmedHESalmanBHKerbeetAS. Heat transfer enhancement of turbulent forced nanofluid flow in a duct using triangular rib. Int J Heat Mass Transfer2019; 134: 30–40.
77.
BahiraeiMMazaheriNHosseiniY, et al.A two-phase simulation for analyzing thermohydraulic performance of Cu–water nanofluid within a square channel enhanced with 90° V-shaped ribs. Int J Heat Mass Transfer2019; 145: 118612.
78.
BahiraeiMJamshidmofidMGoodarziM. Efficacy of a hybrid nanofluid in a new microchannel heat sink equipped with both secondary channels and ribs. J Mol Liquids2019; 273: 88–98.
79.
MohebbiRIzadiMDeloueiAA, et al.Effect of MWCNT-Fe3O4/water hybrid nanofluid on the thermal performance of ribbed channel with apart sections of heating and cooling. J Therm Anal Calorim2019; 135(6): 3029–3042.
80.
EkicilerR. Effects of novel hybrid nanofluid (TiO2-Cu/EG) and geometrical parameters of triangular rib mounted in a duct on heat transfer and flow characteristics. J Therm Anal Calorim2020; 143(2): 1371–1387.
81.
KumarVSarkarJ. Numerical analysis on hydrothermal behavior of various ribbed minichannel heat sinks with different hybrid nanofluids. Arabian J Sci Eng2021; 2021: 1–13.
82.
IslamogluYParmaksizogluC. The effect of channel height on the enhanced heat transfer characteristics in a corrugated heat exchanger channel. Appl Therm Eng2003; 23(8): 979–987.
83.
ElshafeiEAMAwadMMEl-NegiryE, et al.Heat transfer and pressure drop in corrugated channels. Energy2010; 35(1): 101–110.
84.
LaohalertdechaSWongwisesS. Condensation heat transfer and flow characteristics of R-134a flowing through corrugated tubes. Int J Heat Mass Transfer2011; 54(11–12): 2673–2682.
85.
PethkoolSEiamsa-ArdSKwankaomengS, et al.Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube. Int Commun Heat Mass Transfer2011; 38(3): 340–347.
86.
RainieriSBozzoliFCattaniL, et al.Compound convective heat transfer enhancement in helically coiled wall corrugated tubes. Int J Heat Mass Transfer2013; 59: 353–362.
87.
KareemZSAbdullahSLazimTM, et al.Heat transfer enhancement in three-start spirally corrugated tube: experimental and numerical study. Chem Eng Sci2015; 134: 746–757.
88.
BozzoliFCattaniLRainieriS. Effect of wall corrugation on local convective heat transfer in coiled tubes. Int J Heat Mass Transfer2016; 101: 76–90.
89.
TokgozNAksoyMMSahinB. Investigation of flow characteristics and heat transfer enhancement of corrugated duct geometries. Appl Therm Eng2017; 118: 518–530.
90.
SawyersDRSenMChangH-C. Heat transfer enhancement in three-dimensional corrugated channel flow. Int Journal Heat Mass Transfer1998; 41(22): 3559–3573.
91.
HanHZLiBXYuBY, et al.Numerical study of flow and heat transfer characteristics in outward convex corrugated tubes. Int J Heat Mass Transfer2012; 55(25–26): 7782–7802.
92.
AkbarzadehMRashidiSEsfahaniJA. Influences of corrugation profiles on entropy generation, heat transfer, pressure drop, and performance in a wavy channel. Appl Therm Eng2017; 116: 278–291.
93.
ZhangCWangDXiangS, et al.Numerical investigation of heat transfer and pressure drop in helically coiled tube with spherical corrugation. Int J Heat Mass Transfer2017; 113: 332–341.
94.
HongYDuJWangS, et al.Heat transfer and flow behaviors of a wavy corrugated tube. Appl Therm Eng2017; 126: 151–166.
95.
JinZ-jChenF-qGaoZ-x, et al.Effects of pitch and corrugation depth on heat transfer characteristics in six-start spirally corrugated tube. Int J Heat Mass Transfer2017; 108: 1011–1025.
96.
WangWZhangYLiB, et al.Influence of geometrical parameters on turbulent flow and heat transfer characteristics in outward helically corrugated tubes. Energy Convers Management2017; 136: 294–306.
97.
WangWZhangYLiB, et al.Numerical investigation of tube-side fully developed turbulent flow and heat transfer in outward corrugated tubes. Int J Heat Mass Transfer2018; 116: 115–126.
98.
ZhangDTaoHXuY, et al.Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow. Chin J Chem Eng2018; 26(3): 437–444.
99.
CórcolesJIBelmonteJFMolinaAE, et al.Influence of corrugation shape on heat transfer performance in corrugated tubes using numerical simulations. Int J Therm Sci2019; 137: 262–275.
100.
HarikrishnanSTiwariS. Heat transfer characteristics of sinusoidal wavy channel with secondary corrugations. Int J Therm Sci2019; 145: 105973.
101.
Khoshvaght-AliabadiMFeizabadiA. Compound heat transfer enhancement of helical channel with corrugated wall structure. Int J Heat Mass Transfer2020; 146: 118858.
102.
DarziAARFarhadiMSedighiK, et al.Experimental investigation of turbulent heat transfer and flow characteristics of SiO2/water nanofluid within helically corrugated tubes. Int Commun Heat Mass Transfer2012; 39(9): 1425–1434.
103.
WongchareeKEiamsa-ardS. Heat transfer enhancement by using CuO/water nanofluid in corrugated tube equipped with twisted tape. Int Commun Heat Mass Transfer2012; 39(2): 251–257.
104.
DarziAARFarhadiMSedighiK. Experimental investigation of convective heat transfer and friction factor of Al2O3/water nanofluid in helically corrugated tube. Exp Therm Fluid Sci2014; 57: 188–199.
105.
AhmedMAYusoffMZNgKC, et al.Numerical and experimental investigations on the heat transfer enhancement in corrugated channels using SiO2–water nanofluid. Case Stud Therm Eng2015; 6: 77–92.
106.
KaramiMAkhavan-BehabadiMAFakoor-PakdamanM. Heat transfer and pressure drop characteristics of nanofluid flows inside corrugated tubes. Heat Transfer Eng2016; 37(1): 106–114.
107.
AjeelRKSalimWS-ISopianK, et al.Turbulent convective heat transfer of silica oxide nanofluid through corrugated channels: an experimental and numerical study. Int J Heat Mass Transfer2019; 145: 118806.
108.
AnbuSVenkatachalapathySSureshS. Convective heat transfer studies on helically corrugated tubes with spiraled rod inserts using TiO2/DI water nanofluids. J Therm Anal Calorim2019; 137(3): 849–864.
109.
WangGQiCLiuM, et al.Effect of corrugation pitch on thermo-hydraulic performance of nanofluids in corrugated tubes of heat exchanger system based on exergy efficiency. Energy Convers Management2019; 186: 51–65.
110.
AhmedMAShuaibNHYusoffMZ, et al.Numerical investigations of flow and heat transfer enhancement in a corrugated channel using nanofluid. Int Commun Heat Mass Transfer2011; 38(10): 1368–1375.
111.
DarziAARFarhadiMSedighiK, et al.Turbulent heat transfer of Al2O3–water nanofluid inside helically corrugated tubes: numerical study. Int Commun Heat Mass Transfer2013; 41: 68–75.
112.
HassanzadehRTokgozN. Thermal-hydraulic characteristics of nanofluid flow in corrugated ducts. J Eng Thermophys2017; 26(4): 498–513.
113.
QiCWanY-LLiC-Y, et al.Experimental and numerical research on the flow and heat transfer characteristics of TiO2-water nanofluids in a corrugated tube. Int J Heat Mass Transfer2017; 115: 1072–1084.
114.
AjeelRKSalimWIHasnanK. Thermal and hydraulic characteristics of turbulent nanofluids flow in trapezoidal-corrugated channel: Symmetry and zigzag shaped. Case Stud Therm Eng2018; 12: 620–635.
115.
KaoodAHassanMA. Thermo-hydraulic performance of nanofluids flow in various internally corrugated tubes. Chem Eng Processing-Process Intensification2020; 154: 108043.
116.
AjeelRKSopianKZulkifliR. A novel curved-corrugated channel model: thermal-hydraulic performance and design parameters with nanofluid. Int Commun Heat Mass Transfer2021; 120: 105037.
117.
TakabiBSalehiS. Augmentation of the heat transfer performance of a sinusoidal corrugated enclosure by employing hybrid nanofluid. Adv Mech Eng2014; 6: 147059.
118.
AjeelRKZulkifliRSopianK, et al.Numerical investigation of binary hybrid Nanofluid in new configurations for curved-corrugated channel by thermal-hydraulic performance method. Powder Technol2021; 385: 144–159.
119.
SelimefendigilFÖztopHF. Analysis of hybrid nanofluid and surface corrugation in the laminar convective flow through an encapsulated PCM filled vertical cylinder and POD-based modeling. Int J Heat Mass Transfer2021; 178: 121623.
120.
AjeelRKSopianKZulkifliR, et al.Assessment and analysis of binary hybrid nanofluid impact on new configurations for curved-corrugated channel. Adv Powder Technol2021.
