Magnesium alloys are lap-joined to galvanised and bare steel sheets by a cold metal transfer method. The weld appearance, cross-section, tensile strength and fracture behaviour of these joints are characterised by scanning electron microscopy, tensile tests and energy-dispersive spectroscopy. The joints were found to have good weld appearance and satisfactory tensile strength. The spreadability and wettability of the Mg alloy–galvanised steel joint are superior to those of the Mg alloy–bare steel joint, but the tensile strength is lower. In particular, the presence of Zn on the galvanised steel sheet improves wettability but decreases tensile strength. Aluminium has a high affinity for Fe, and the thinner layer of Fe–Al improves the mechanical properties of the Mg alloy–bare steel joint.
SongG. and WangP.: ‘Pulsed MIG welding of AZ31B magnesium alloy’, Mater. Sci. Technol., 2011, 27, 518–524. doi: 10.1179/026708309X12506933873701
2.
LiuL. M., SongG. and ChiM. S.: ‘Laser–tungsten inert gas hybrid welding of dissimilar AZ based magnesium alloys’, Mater. Sci. Technol., 2005, 21, 1078–1082. doi: 10.1179/174328405X62378
3.
LiuL., XiaoL., FengJ., LiL., EsmaeiliS. and ZhouY.: ‘Bonding of immiscible Mg and Fe via a nanoscale Fe2Al5 transition layer’, Scr. Mater., 2011, 65, 982–985. doi: 10.1016/j.scriptamat.2011.08.026
4.
LiuL., XiaoL., FengJ. C., TianY. H., ZhouS. Q. and ZhouY.: ‘The mechanisms of resistance spot welding of magnesium to steel’, Metall. Mater.Trans. A, 2010, 41A, 2651–2661. doi: 10.1007/s11661-010-0333-0
5.
SantellaM., BrownE., PozueloM., PanT.-Y. and YangJ.-M.: ‘Details of Mg–Zn reactions in AZ31 to galvanized mild steel ultrasonic spot welds’, Sci. Technol. Weld. Join., 2012, 17, 219–224. doi: 10.1179/1362171811Y.0000000098
6.
PatelV. K., BholeS. D. and ChenD. L.: ‘Formation of zinc interlayer texture during dissimilar ultrasonic spot welding of magnesium and high strength low alloy steel’, Mater. Des., 2013, 45, 236–240. doi: 10.1016/j.matdes.2012.09.018
7.
SchneiderC., WeinbergerT., InoueJ., KosekiT. and EnzingerN.: ‘Characterization of interface of steel/magnesium FSW’, Sci. Technol. Weld. Join., 2011, 16, 100–107. doi: 10.1179/1362171810Y.0000000012
8.
ChenY. C. and NakataK.: ‘Friction stir lap welding of magnesium alloy and zinc coated steel’, Metall. Trans. A, 2009, 50, 2598–2603.
9.
ChenY. C. and NakataK.: ‘Effect of surface states of steel on microstructure and mechanical properties of lap joints of magnesium alloy and steel by friction stir welding’, Sci. Technol. Weld. Join., 2010, 15, 293–298. doi: 10.1179/136217109X12568132624325
10.
JanaS., HovanskiY. and GrantG. J.: ‘Friction stir lap welding of magnesium alloy to steel: a preliminary investigation’, Metall. Mater.Trans. A, 2010, 41A, 3173–3182. doi: 10.1007/s11661-010-0399-8
11.
LiyanageT., KilbourneJ., GerlichA. P. and NorthT. H.: ‘Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds’, Sci. Technol. Weld. Join., 2009, 14, 500–508. doi: 10.1179/136217109X456960
12.
LiL., TanC., ChenY., GuoW. and HuX.: ‘Influence of Zn coating on interfacial reactions and mechanical properties during laser welding-brazing of Mg to steel’, Metall. Mater.Trans. A, 2012, 43A, 4740–4754. doi: 10.1007/s11661-012-1266-6
13.
LiL., TanC. and ChenY.: ‘CO2 laser welding-brazing characteristics of dissimilar metals AZ31B Mg alloy to Zn coated dual phase steel with mg based filler’, J. Mater. Proc. Technol., 2013, 213, 361–375. doi: 10.1016/j.jmatprotec.2012.10.009
14.
TanC. W., ChenY. B., LiL. Q. and GuoW.: ‘Comparative study of microstructure and mechanical properties of laser welded–brazed Mg/steel joints with four different coating surfaces’, Sci. Technol. Weld. Join., 2013, 18, 466–472. doi: 10.1179/1362171813Y.0000000123
15.
TanC., LiL., ChenY. and GuoW.: ‘Laser-tungsten inert gas hybrid welding of dissimilar metals AZ31B Mg alloys to Zn coated steel’, Mater. Des., 2013, 49, 766–773. doi: 10.1016/j.matdes.2013.02.049
16.
MiaoY., WuB., XuX. and HanD.: ‘Effect of heat input on microstructure and mechanical properties of joints made by bypass-current MIG welding–brazing of magnesium alloy to galvanized steel’, Acta Metall. Sin. (Engl. Lett.), 2014, 27, 1038–1045. doi: 10.1007/s40195-014-0118-3
17.
PeyreP., SierraG., Deschaux-BeaumeF., StuartD. and FrasG.: ‘Generation of aluminium–steel joints with laser-induced reactive wetting’, Mater. Sci. Eng. A, 2007, 444, 327–338. doi: 10.1016/j.msea.2006.09.111
18.
ZhangH. T., FengJ. C. and HeP.: ‘Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium’, Mater. Sci. Technol., 2008, 24, 1346–1349. doi: 10.1179/174328407X213152
19.
CaoR., SunJ. H., ChenJ. H. and WangP. C.: ‘Cold metal transfer joining of aluminum AA6061-T6-to-galvanized boron steel’, J. Manuf. Sci. Eng., 2014, 136, 051015. doi: 10.1115/1.4028012
20.
ZhangH. T., FengJ. C., HeP. and HacklH.: ‘Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process’, Mater. Charact., 2007, 58, 588–592. doi: 10.1016/j.matchar.2006.07.008
21.
LiuL. and QiX.: ‘Strengthening effect of nickel and copper interlayers on hybrid laser-TIG welded joints between magnesium alloy and mild steel’, Mater. Des., 2010, 31, 3960–3963. doi: 10.1016/j.matdes.2010.03.039
22.
LiuL., QiX. and ZhangZ.: ‘The effect of alloying elements on the shear strength of the lap joint of az31b magnesium alloy to Q235 steel by hybrid laser-TIG welding technique’, Metall. Mater.Trans. A, 2012, 43A, 1976–1988. doi: 10.1007/s11661-011-1071-7
23.
SongG. and ShanCh.: ‘Microstructures of laser–tungsten inert gas hybrid welding of dissimilar AZ31 Mg alloy and Q235 steel with Ni as interlayer’, Mater. Res. Innovations, 2011, 15, 145–149. doi: 10.1179/143307511X12998222919074
24.
QiX.-D. and LiuL.: ‘Comparative study on characteristics of hybrid laser-TIG welded AZ61/Q235 lap joints with and without interlayers’, J. Mater. Sci., 2010, 45, 3912–3920. doi: 10.1007/s10853-010-4451-2
25.
RenD. and LiuL.: ‘Interface microstructure and mechanical properties of arc spot welding Mg–steel dissimilar joint with Cu interlayer’, Mater. Des., 2014, 59, 369–376. doi: 10.1016/j.matdes.2014.03.006
26.
ElthalabawyW. M. and KhanT. I.: ‘Eutectic bonding of austenitic stainless steel 316L to magnesium alloy AZ31 using copper interlayer’, Int. J. Adv. Manuf. Technol., 2010, 55, 235–241. doi: 10.1007/s00170-010-3026-3
27.
KobaM., ArakiT., NambuS., InoueJ. and KosekiT.: ‘Bonding interface formation between Mg alloy and steel by liquid-phase bonding using the Ag interlayer’, Metall. Mater.Trans. A, 2012, 43A, 592–597. doi: 10.1007/s11661-011-0878-6
28.
PatelV. K., BholeS. D. and ChenD. L.: ‘Characterization of ultrasonic spot welded joints of Mg-to-galvanized and ungalvanized steel with a tin interlayer’, J. Mater. Process. Technol., 2014, 214, 811–817. doi: 10.1016/j.jmatprotec.2013.11.028
29.
LiuL., QiX. and WuZ.: ‘Microstructural characteristics of lap joint between magnesium alloy and mild steel with and without the addition of Sn element’, Mater. Lett., 2010, 64, 89–92. doi: 10.1016/j.matlet.2009.10.023
30.
NasiriA. M., LiL., KimS. H., ZhouY., WeckmanD. C. and NguyenT. C.: ‘Microstructure and properties of laser brazed magnesium to coated steel’, Weld. J., 2011, 90, 211s–219s.
31.
WangJ., FengJ. C. and WangY. X.: ‘Microstructure of Al–Mg dissimilar weld made by cold metal transfer MIG welding’, Mater. Sci. Technol., 2008, 24, 827–831. doi: 10.1179/174328408X278411
32.
ZhangH. T., FengJ. C., HeP., ZhangB. B., ChenJ. M. and WangL.: ‘The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel’, Mater. Sci. Eng. A, 2009, 499, 111–113. doi: 10.1016/j.msea.2007.11.124
33.
ZhangH., FengJ. and HuL.: ‘Energy input and metal transfer behavior of CMT welding process’, Mater. Sci. Technol., 2012, 20, (2), 128–132(in Chinese).
34.
CaoR., SunJ. H., ChenJ. H. and WangP. C.: ‘Weldability of CMT joining of AA6061T6 to boron steels with various coatings’, Weld. J., 2014, 93, 193–204.
