A theoretical model of a four-pad bearing profile with unique adjustable or controllable features is simulated in the present study by considering load directed between the pads. Radial and tilt adjustable mechanism of the four bearing pads can effectively control and modify the rotor operating behaviour. Inward and outward motions of the bearing pads result in the generation of narrow and broader convergent regions, which directly influences the fluid film pressures. In the theoretical analysis, load-between-pad (LBP) orientations and pad adjustment configurations are taken account of by employing a modified film thickness equation. The effect of load position in influencing the steady state behaviour of the four-pad adjustable bearing under varied pad displaced conditions is analysed in this study. The outcome of the analysis highlighted the effectiveness of four-pad adjustable bearing in improving the steady state performance by operating under negative adjustment conditions and with load acting on the bearing pads.
NicolettiRSantosIF.Linear and non-linear control techniques applied to actively lubricated journal bearings. J Sound Vib2003;
260: 927–947.
4.
HaugaardAMSantosIF.Elastohydrodynamics applied to active tilting-pad journal bearings. J Tribol2010;
132: 021702.
5.
HaugaardAMSantosIF.Multi-orifice active tilting-pad journal bearings-harnessing of synergetic coupling effects. Tribol Int2010;
43: 1374–1391.
6.
HaugaardAMSantosIF.Stability of multi orifice active tilting-pad journal bearings. Tribol Int2010;
43: 1742–1750.
7.
VarelaACSantosIF.Performance improvement of tilting-pad journal bearings by means of controllable lubrication. Mech Ind2012;
13: 17–32.
8.
OgrodnikPJGoodwinMJRoachMP, et al.
A novel variable impedance hydrodynamic oil-film bearing: part 1: theoretical modelling. Proc IMechE, Part J: J Engineering Tribology1996;
210: 55–63.
9.
OgrodnikPJGoodwinMJFangY, et al.
A novel variable impedance hydrodynamic oil-film bearing: Part 2: Experimental identification of the steady state and dynamic characteristics. Proc Inst Mech Eng: Part J1996;
210: 65–74.
10.
PalazzoloABLinRRAlexanderRM, et al.
Test and theory for piezoelectric actuator-active vibration control of rotating machinery. J Vib Acoust1991;
113: 167–175.
11.
LinRRPalazzoloABKascakAF, et al.
Electromechanical simulation and testing of actively controlled rotordynamic systems with piezoelectric actuators. J Eng Gas Turb Power1993;
115: 324–335.
12.
TangPPalazzoloAKascakA, et al.
Combined piezoelectric-hydraulic actuator based active vibration control for rotordynamic system. J Vib Acoust1995;
117: 285–293.
13.
TangPPalazzoloABKascakAF, et al.
Active vibration control of rotating machinery with a hybrid piezohydraulic actuator system. J Eng Gas Turbines Power1995;
117: 767–776.
14.
PrzybylowiczPM.Active stabilisation of a rigid rotor by piezoelectrically controlled mobile journal bearing system. Aust J Mech Eng2004;
1: 123–128.
15.
T ůmaJŠimekJŠkutaJ, et al.
Active vibrations control of journal bearings with the use of piezoactuators. Mech Syst Signal Process2013;
36: 618–629.
16.
T ůmaJŠimekJMahdalM, et al.
Piezoelectric actuators in the active vibration control system of journal bearings. J Phys Conf Ser2017;
870: 012017.
17.
ChasalevrisADohnalF.A journal bearing with variable geometry for the reduction of the maximum amplitude during passage through resonance. J Vib Acoust2012;
134: 061005.
18.
ChasalevrisADohnalF.Vibration quenching in a large-scale rotor-bearing system using journal bearings with variable geometry. J Sound Vib2014;
333: 2087–2099.
19.
ChasalevrisADohnalF.A journal bearing with variable geometry for the suppression of vibrations in rotating shafts: simulation, design, construction and experiment. Mech Syst Signal Process2015;
52–53: 506–528.
20.
ChasalevrisADohnalF.Suppressing vibrations of shafts using adjustable bearings. US Patent 2018/0003075A1, 2018.
21.
ChasalevrisADohnalF.Improving stability and operation of turbine rotors using adjustable journal bearings. Tribol Int2016;
104: 369–382.
22.
MartinJKParkinsDW.Fluid film bearings. US Patent 5,772,334, 1998.
23.
MartinJKParkinsDW.Theoretical studies of a continuously adjustable hydrodynamic fluid film bearing. J Tribol2002;
124: 203–211.
24.
MartinJK.Measured stiffness and displacement coefficients of a stationary rotor hydrostatic bearing. Tribol Int2004;
37: 809–816.
25.
ShenoyBS.Performance evaluation of single pad externally adjustable fluid film bearing. PhD Thesis, Manipal University, Manipal, 2008.
26.
ShenoyBSPaiR.Theoretical investigations on the performance of an externally adjustable fluid-film bearing including misalignment and turbulence effects. Tribol Int2009;
42: 1088–1100.
27.
ShenoyBSPaiR.Stability characteristics of an externally adjustable fluid film bearing in the laminar and turbulent regimes. Tribol Int2010;
43: 1751–1759.
28.
PaiRParkinsDW.Performance characteristics of an innovative journal bearing with adjustable bearing elements. J Tribol2018;
140: 041705.
29.
Hariharan G andPaiR.Mathematical formulation of a modified film thickness equation for multipad externally adjustable fluid film bearing. Cogent Eng2018;
5: 1–15.
30.
Hariharan G andPaiR.Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing. ILT2019;
71: 803–809.
