Abstract
In this study, the effect of the arrangement of Kevlar and basalt fibers as the reinforcements on the Charpy impact behavior of hybrid epoxy composites was investigated. Also, the effect of adding metal plates (aluminum 2024-T3 and stainless steel 316L) into the basalt/ Kevlar fibers reinforced epoxy composites to fabricate fiber metal laminates under Charpy impact loads was studied. The fabricated fiber metal laminates in this research consisted of three metal plates and two groups of composite layers placed between them and were fabricated by the hand lay-up technique. Results indicated that the stacking sequence of fibers due to the hybridization effect caused a considerable improvement in the energy absorption value (99%) of hybrid composites, compared to specimens with one kind of fibers. Moreover, the effect of adding aluminum plates for the fabrication of fiber metal laminate was greater than adding steel plates. Considering the weight of composites, fiber metal laminates with aluminum and steel sheets, it was found that the average specific energy absorption value of aluminum fiber metal laminates was about 2.5 times higher than those of steel fiber metal laminates and composites.
Get full access to this article
View all access options for this article.