In this article, the effect of adding micro glass powder into basalt fiber reinforced epoxy composites on the Charpy impact behavior is investigated by both flatwise and edgewise specimens. Also, the effect of adding micro glass powder at two temperatures is examined on the Charpy impact behavior in order to obtain a more detailed knowledge of the role of micro glass powder in polymer composites. Moreover, the effect of adding metal layers to basalt fiber reinforced epoxy composites with various combinations of metals to make basalt fiber metal laminates in Charpy impact test is studied. Finally, it was found that adding micro glass powder increased energy absorption and this effect improved by increasing temperature. Moreover, the superiority of basalt fiber metal laminates in energy absorption as compared to basalt fiber reinforced epoxy is observed. Scanning electron microscopy is used for selective specimens to analyze the nature of fracture surfaces.
BartczakZArgonASCohenRE (1990) Toughness mechanism in semicrystalline polymer blends: II High-density polyethylene toughened with calcium carbonate filler particles. Polymer40: 2347–2365.
2.
BinWHailinCShenhuaS (2010a) Environmental resistance and mechanical performance of basalt and glass fibers. Materials Science and Engineering A527: 4708–4715.
3.
BinWHailinCShenhuaS (2010b) Tensile behavior contrast of basalt and glass fibers after chemical treatment. Materials and Design31: 4244–4250.
4.
BinWHailinCShenhuaS (2011) Degradation of basalt fiber and glass fiber/epoxy resin composites in seawater. Corrosion Science53: 426–431.
5.
CarmiscianoSMaria De RosaIFabrizioS (2011) Basalt woven fiber reinforced vinylester composites: Flextural and electrical properties. Materials and Design32: 337–342.
6.
ColomboCVerganiLBurmanM (2012) Static and fatigue characterization of new basalt fiber reinforced composites. Composite Structures94: 1165–1174.
7.
FioreVDi BellaGValenzaA (2011) Glass-basalt epoxy hybrid composites for marine applications. Materials and Design32: 2091–2099.
HufenbachWMarques IbraimFLangkampA (2008) Charpy impact tests on composite structures—an experimental and numerical investigation. Composites Science and Technology68: 2391–2400.
10.
KalthoffJK (2004) Characterization of the dynamic failure behaviour of a glass-fiber/vinyl-ester at different temperatures by means of instrumented Charpy impact testing. Composites: Part B Engineering35: 657–663.
11.
KaragiozovaDLangdonGSNurickGN (2010) Simulation of the response of fiber–metal laminates to localised blast loading. International Journal of Impact Engineering37: 766–782.
12.
KawAK (2006) Mechanics of Composite Materials, Boca Raton, FL: CRC Press Taylor & Francis Group LLC, 2006.
13.
KhaliliSMRDaghighVEslami FarsaniR (2011) Mechanical behavior of basalt reinforced and basalt fiber metal laminate composites under tensile and bending loads. Journal of Reinforced Plastics and Composites30: 647–659.
14.
KhaliliSMRMittalRKGharibi KalibarS (2005) A study of the mechanical properties of steel/aluminum/GRP laminates. Materials Science and Engineering A412: 137–140.
15.
KhaliliSMRShokuhfarAHoseiniSD (2008) Experimental study of the influence of adhesive reinforcement in lap joints for composite structure in subjected to mechanical loads. International Journal of Adhesion and Adhesives28: 436–444.
16.
KuanHTNCantwellWJAkilHMd (2011) The fracture properties of environmental-friendly fiber metal laminates. Journal of Reinforced Plastics and Composites30: 6499–6508.
17.
LangdonGSLemanskiSLNurickGN (2007) Behaviour of fiber–metal laminates subjected to localised blast loading: Part I—experimental observations. International Journal of Impact Engineering34: 1202–1222.
18.
LemanskiSLNurickGNLangdonGS (2006) Understanding the behaviour of fiber metal laminates subjected to localised blast loading. Composite Structures76: 82–87.
19.
LoprestoVLeoneCDe IorioI (2011) Mechanical characterization of basalt fiber reinforced plastic. Composites Part B: Engineering42: 717–723.
20.
MedvedyevOTsybulyaY (2005) Basalt use in hot gas filtration. Filtration and Separation42: 34–37.
21.
Messler RW (2004) Joining of Materials and Structures: From Pragmatic Process to Enabling Technology. Amsterdam: Elsevier Science B.V., Chapter 15, pp.697–741.
22.
Mills K, Davis JR, Destefani JD, et al. (1992) ASM Handbooks, Formerly 9th ed., Metals Handbook, Vol. 9, Metallography and Micro Structures, 5th printing, USA, pp.279–285.
23.
MirabediniSMMohseniMPazokiFardSh (2008) Effect of TiO2 on the mechanical and adhesion properties of RTV silicone elastomer coatings. Colloids and Surfaces A: Physicochemical and Engineering Aspects317: 80–86.
24.
MirabediniSMThompsonGEMoradianS (2003) Corrosion performance of powder coated aluminum using EIS. Progress in Organic Coatings46: 112–120.
25.
MohseniMMirabediniMHashemiM (2006) Adhesion performance of an epoxy clear coat on aluminum alloy in the presence of vinyl and amino-silane primers. Progress in Organic Coatings57: 307–313.
World Health Organization International Agency for Research on Cancer IARC (2002) Monographs on the Evaluation of Carcinogenic Risks to Humans, Volume 81, Man-made Vitreous Fibers, Summary of Data Reported and Evaluation.
