Thermal error controlling for the spindle in a precision boring machine with external cooling across coated joints

Abstract

Spindles in precision boring machines usually operate without internal cooling, and thermal error in such spindles is nonnegligible and can severely affect the end-processing quality of the machines. This study aims to investigate the effects that external cooling exerts on the thermal behavior of such spindles. A helical tube cooler is taken for external cooling. An analytical thermal resistance model for the grease-coated cooler-housing joint surface, which considers the pressured cambered-flat contact pair and rough metal surface-grease contact, is presented and validated, and a numerical thermal–fluid–solid coupling model for the cooler-spindle system is then established. An evaluation method is put forward to obtain the stability of the thermal error, which determines the boring processing accuracy and thermal equilibrium time, from experimental data. Then, the external cooling was optimally designed based on the simulation results from the numerical model. Experiments show that the designed cooler reduced the thermal equilibrium time by 47.13% and the maximum thermal error by 81.7%, and the proposed model can accurately predict the cooling effect on the spindle thermal behavior. This study not only provides a thermal error control method for the spindle but is expected to advance the theoretical basis of cooling design for complex electromechanical systems.

Keywords

Precision boring machine helical tube thermal error stabilization thermal equilibrium grease-coated joint

Get full access to this article

View all access options for this article.

References

Mayr

, et al. Thermal issues in machine tools. CIRP Ann 2012; 61: 771–791.

Yang

Mei

Zhao

. Thermal error compensation on a computer numerical control machine tool considering thermal tilt angles and cutting tool length. Proc IMechE, Part B: J Engineering Manufacture 2015; 229(1 Suppl): 78–97.

Liu

, et al. A differentiated multi-loops bath recirculation system for precision machine tools. Appl Therm Eng 2015; 76: 54–63.

Liu

, et al. Power matching based dissipation strategy onto spindle heat generations. Appl Therm Eng 2017; 113: 499–507.

Grama

Mathur

Badhe

. A model-based cooling strategy for motorized spindle to reduce thermal errors. Int J Mach Tools Manuf 2018; 132: 3–16.

Zhang

, et al. Active coolant strategy for thermal balance control of motorized spindle unit. Appl Therm Eng 2018; 134: 460–468.

Ding

. Design of thermal error control system for high-speed motorized spindle based on thermal contraction of CFRP. Int J Mach Tools Manuf 2018; 125: 99–111.

Baghban

, et al. Sensitivity analysis and application of machine learning methods to predict the heat transfer performance of CNT/water nanofluid flows through coils. Int J Heat Mass Transfer 2019; 128: 825–835.

Madhusudana

. Thermal contact conductance/CV Madhusudana. Mechanical engineering series (Berlin, Germany), New York: Springer-Verlag, 1996.

10.

Zhang

Gao

Yan

. Thermal error characteristic analysis and modeling for machine tools due to time-varying environmental temperature. Precis Eng 2017; 47: 231–238.

11.

Xia

, et al. Conjugate heat transfer in fractal tree-like channels network heat sink for high-speed motorized spindle cooling. Appl Therm Eng 2015; 90: 1032–1042.

12.

Lin

, et al. Modeling and optimization of thermal characteristics for roll grinders. Int J Adv Manuf Technol 2018; 97: 993–1004.

13.

Uhlmann

. Thermal modelling of a high speed motor spindle. Proc CIRP 2012; 1: 313–318.

14.

Creighton

, et al. Analysis of thermal errors in a high-speed micro-milling spindle. Int J Mach Tools Manuf 2010; 50: 386–393.

15.

Zhang J and Li H. Thermal performance analysis for the machine tool's spindle. In: 2012 7th IEEE Conference on Industrial Electronics and Applications (ICIEA), Singapore, 2012, pp. 2131–2134.

16.

Liu

, et al. Thermal-structure interaction characteristics of a high-speed spindle-bearing system. Int J Mach Tools Manuf 2019; 137: 42–57.

17.

Ming-Lu S, et al. An improved thermal simulation model for the spindle of CNC machine tool. In: 2010 international conference on mechanic automation and control engineering, Wuhan, China, 26–28 June 2010.

18.

, et al. Simulation and experimental study on the thermally induced deformations of high-speed spindle system. Appl Therm Eng 2015; 86: 251–268.

19.

Bajracharya

, et al. Characterization of thermal contact resistance doped with thermal interface material. J Kor Soc Precis Eng 2013; 30: 943–950.

20.

Prasher

. Surface chemistry and characteristics based model for the thermal contact resistance of fluidic interstitial thermal interface materials. J Heat Transfer 2001; 123: 969–975.

21.

Yuan

, et al. An improved model for predicting thermal contact resistance at liquid–solid interface. Int J Heat Mass Transfer 2015; 80: 398–406.

22.

Hamasaiid

, et al. A predictive model for the thermal contact resistance at liquid–solid interfaces: Analytical developments and validation. Int J Therm Sci 2011; 50: 1445–1459.

23.

Hamasaiid

, et al. A predictive model for the evolution of the thermal conductance at the casting–die interfaces in high pressure die casting. Int J Therm Sci 2010; 49: 365–372.

24.

Prasher RS, et al. Thermal resistance of particle laden polymeric thermal interface materials. In: ASME 2003 international mechanical engineering congress and exposition, 2003. New York, NY: American Society of Mechanical Engineers.

25.

Grujicic

Zhao

Dusel

. The effect of thermal contact resistance on heat management in the electronic packaging. Appl Surf Sci 2005; 246: 290–302.

26.

Prasher

, et al. Thermal resistance of particle laden polymeric thermal interface materials. J Heat Transfer 2003; 125: 1170–1177.

27.

Committee AD. Standard test method for thermal transmission properties of thermally conductive electrical insulation materials. ASTM International, West Conshohocken, PA, Standard No. ASTM D5470-06, www.astm.org/DATABASE.CART/HISTORICAL/D5470-06.htm, 2012.

28.

Yuan

Peng

Yan

. Surface characterization using wavelet theory and confocal laser scanning microscopy. J Tribol 2005; 127: 394–404.

29.

Prasher RS, et al. Rheological study of micro particle laden polymeric thermal interface materials: part 2 – modeling. New York, NY: ASME, 2002, pp.53–59l.

30.

Schmucker

Flemming

Coulson

. Two-way coupled fluid structure interaction simulation of a propeller turbine. IOP Conf Ser Earth Environ Sci 2010; 12: 012011.

31.

Bergman

, et al. Fundamentals of heat and mass transfer, Hoboken, NJ: John Wiley & Sons, 2011.

32.

Yang

, et al. Thermal error modeling and compensation for a high-speed motorized spindle. Int J Adv Manuf Technol 2015; 77: 1005–1017.

33.

Harris

. Rolling bearing analysis, Hoboken, NJ: John Wiley and Sons, 2001.

34.

Yang

, et al. Experiments and simulation of thermal behaviors of the dual-drive servo feed system. Chin J Mech Eng 2015; 28: 76–87.