Strength check of a three-row roller slewing bearing based on a mixed finite element model

Abstract

For the two failure modes of a three-row roller slewing bearing, ring fracture and raceway spalling, a method for checking the strength of a slewing bearing through finite element analysis is proposed. This method calculates the internal stress distribution of the bearing rings by using the mixed finite element model with both solid elements and spring elements of the slewing bearing assembly and checks the bearing structural strength by using the maximum internal stress of the bearing rings. The method also calculates the contact stress between the roller and raceways by using the entity contact model between the roller and the raceways; the obtained maximum contact stress is used to check the contact strength of the slewing bearing. The proposed mixed finite element model considers the structural deformation of the bearing rings, and the calculated results can reflect the real situation more accurately than the traditional analytical model with the hypothesis of rigid ring. The proposed method also avoids the solution problem, which has large-scale calculation and difficulty of convergence of the entity finite element model of a slewing bearing, and the calculation efficiency is improved effectively. The calculated results by mixed finite element model are consistent with the failure mode of this type of slewing bearing in engineering practice.

Keywords

Three-row roller slewing bearing contact strength structural strength mixed finite element model

Get full access to this article

View all access options for this article.

References

Potočnik

Göncz

Flašker

et al.

Fatigue life of double row slewing ball bearing with irregular geometry. Procedia Eng 2010; 2: 1877–1886.

Glodež

Potočnik

Flašker

. Computational model for calculation of static capacity and lifetime of large slewing bearing’s raceway. Mech Mach Theor 2012; 47: 16–30.

Kania

Krynke

Mazanek

. A catalogue capacity of slewing bearings. Mech Mach Theor 2012; 58: 29–45.

Chen

Jia

. Effects of geometric parameters on static load capacity of a double-row four-point contact ball bearing. J Mech Sci Tech 2013; 27: 1053–1061.

Cheng

. Unbalance loading analysis and profile modification research of roller of crossed cylindrical roller slewing bearings. J Mech Eng 2015; 51: 161–166.

Olave

Sagartzazu

Damian

et al.

Design of four contact-point slewing bearing with a new load distribution procedure to account for structural stiffness. J Mech Des 2010; 132: 021006.1–021006.10.

Liu DD. The FEA of three-row roller bearing used for tunnel shield. MS Thesis, Henan University of Science and Technology, China, 2010.

Chen HT. Finite element analysis of blade bearing of MW-class wind turbine. MS Thesis, Henan University of Science and Technology, China, 2012.

Kania

. Modelling of rollers in calculation of slewing bearing with the use of finite elements. Mech Mach Theor 2006; 41: 1359–1376.

10.

Smolnicki

Rusinski

. Superelement-based modeling of load distribution in large-size slewing bearings. J Mech Des 2007; 129: 459–463.

11.

Daidié

Chaib

Ghosn

. 3D simplified finite elements analysis of load and contact angle in a slewing ball bearing. J Mech Des 2008; 130: 082601.1–082601.8.

12.

Gao

Huang

Wang

et al.

Modeling of ball-raceway contacts in a slewing bearing with nonlinear springs. Proc IMechE, Part C: J Mechanical Engineering Science 2010; 225: 827–831.

13.

Shang

Dong

Mao

et al.

Finite element analysis method of slewing bearing with plastic deformation. Trans CSAE 2011; 27: 52–56.

14.

Harris

Kotzalas

. Rolling bearing analysis: essential concepts of bearing technology, 5th ed. Boca Raton: CRC Press, 2006, pp. 136–137.

15.

. Static load capacity of three-row roller slewing bearing considering clearances. Appl Mech Mater 2011; 52–54: 562–567.

16.

Shen

Shi

et al.

Experimental research on allowable contact stress of slewing bearing made by 42CrMo steel. Bearing 2009; 2: 34–36.