Solar.q_1: A new solar-tracking mechanism based on four-bar linkages

Abstract

This paper describes the early stages of the design process of a 2-DOF parallel mechanism, based on the use of four-bar linkages and intended to move photovoltaic panels in order to perform sun tracking. Primary importance is given to the search for a way to compensate sun–earth’s relative motions with two decoupled rotations of the panel. This leads to devise a kinematic structure characterized by a particular arrangement of the revolute axes. At the same time, the structure itself is designed in order to be slender. Subsequently, the fact that during a day the earth’s revolution around the sun has negligible effects on the apparent trajectory of the sun, if compared to the rotation around the polar axis, leads to choose a control strategy which, also thanks to the said arrangement of axes, employs only 1-DOF for most of the daytime. The tracker which employs this strategy has, theoretically, an energy consumption similar to that of 1-DOF solar trackers but a precision similar to that of 2-DOF ones.

Keywords

Solar-tracking mechanisms four-bar linkage sun trajectory kinematic analysis and simulation

Get full access to this article

View all access options for this article.

References

Mousazadeh

Keyhani

Javadi

. A review of principle and sun-tracking methods for maximizing solar systems output. Renew Sustain Energy Rev 2009; 19: 1800–1818.

Comsit M and Vişa I. Design of the linkages type tracking mechanisms of the solar energy conversion systems by using multi body systems method. In: Proceedings of twelfth world congress in mechanism and machine science, Besancon, France, 2007.

Rolland L. Kinematics synthesis of 2 DOF parallel manipulators for solar tracking. In:Merlet J-P and Dahan M (eds) Proceedings of the 21th International Workshop on Robotics in Alpe-Adria-Danube Region (RAAD), ESA, Naples, 2012, pp.93–100.

Altuzarra

Macho

Aginaga

. Design of a solar tracking parallel mechanism with low energy consumption. Proc IMechE, Part C: J Mechanical Engineering Science 2014; 229: 566–579.

Diaconescu DV, Vişa I, Vătăşescu M, et al. Synthesis of a bi-axial tracking linkage with a single actuator. In: Proceedings of the 10th IFToMM International Symposium, 2010.

Lumbreras RC. Directable solar panel systems. Patent 174295, USA, 2011.

Sherman J. Solar tracking for terrestrial solar arrays with variable start and stop positions. Patent 0102202, USA 2010, pp.617–632. Oulu, Finland: Springer.

Grant T and Morales Torres R. Single-axis solar tracker and solar power installation. Patent 0073565, USA, 2012.

Scanlon M. High efficiency counterbalanced dual axis solar tracking array frame system. Patent 0073161, USA, 2011.

10.

Cabanillas Saldaña JP. Dual-axis solar tracker. Patent 8237098, USA, 2012.

11.

Bollanti S, De Meis D, Di Lazzaro P, et al. Calcolo analitico della posizione del Sole per l’allineamento di impianti solari ed altre applicazioni. Rapporto tecnico ENEA, 2012.