The initial version of this paper was presented at 2014 Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators, Tianjin, China.
The conceptual design of three types of decoupled, compact, and monolithic XYZ compliant parallel manipulators (CPMs) is taken into account in this paper using the position space concept. The CPMs are termed CUBEs due to the shape of their compact structures. The position space of a compliant module is the combination of all permitted positions in an XYZ CPM system where the constraint of this compliant module in the XYZ CPM system remains unchanged when the position of the compliant module changes within the position space. The position of each compliant P joint is considered relative to its adjacent compliant joint/module rather than being considered in insolation. A design method for obtaining monolithic XYZ CPMs is proposed in terms of both the kinematic substitution and position spaces. Three types of monolithic XYZ CPMs are then demonstrated using the proposed method, with the help of three classes of kinematically decoupled three degrees of freedom translational parallel mechanisms. These monolithic XYZ CPMs include a 3-PPP (P: prismatic) XYZ CPM, a 3-PPPR (R: revolute) XYZ CPM, and a 3-PPPRR XYZ CPM. The position space concept can enable the system configurations to be designed based on the chosen optimization requirements, which include considerations such as compactness or minimization of parasitic rotations. This provides an efficient and systematic method to arrange the relative position between any two compliant joints/modules so that one can easily generate practical and useful configurations for XYZ CPMs. The resulting XYZ CPM is the most compact one when the fixed ends of the three actuated compliant P joints thereof overlap or are as close to each other as possible.
SchitterGThurnerPJHansmaPK. Design and input-shaping control of a novel scanner for high-speed atomic force microscopy. Mechatronics2008; 18: 282–288.
2.
WernerCRosiellePCJNSteinbuchM. Design of a long stroke translation stage for AFM. Int J Mach Tools Manuf2010; 50: 183–190.
3.
ShinnoHYoshiokaH. A newly developed three-dimensional profile scanner with nanometer spatial resolution. CIRP Ann Manuf Technol2010; 59: 525–528.
4.
Martock Design Limited. Adjustable mountings. United States Patent No. 4635887, 1987.
5.
HowellLL. Compliant mechanisms, New York: Wiley, 2001.
6.
KongXGosselinCM. Type synthesis of parallel mechanisms, Berlin: Springer, 2007.
7.
HaoGKongX. Design and modelling of a large-range modular XYZ compliant parallel manipulators using identical spatial modules. J Mech Robot2012; 4: 021009–021009.
8.
LiYXuQ. A totally decoupled piezo-driven XYZ flexure parallel micropositioning stage for micro/nanomanipulation. IEEE Trans Automat Sci Eng2011; 8: 265–279.
9.
PhamH-HYehHCChenI-M. Micromanipulation system design based on selective actuation mechanisms. Int J Robot Res2006; 25: 171–185.
10.
Hao G and Kong X. A 3-DOF translational compliant parallel manipulator based on flexure motion. In: Proceedings of the ASME 2009 international design engineering technical conferences & computers and information in engineering conference (IDETC/CIE 2009), August 30–September 2, 2009, DETC2009-86075, San Diego, California, USA.
11.
YueYGaoFZhaoX. Relationship among input-force, payload, stiffness and displacement of a 3-DOF perpendicular parallel micro-manipulator. Mech Mach Theor2010; 45: 756–771.
12.
TangXChenI-MLiQ. Design and nonlinear modeling of a large-displacement XYZ flexure parallel mechanism with decoupled kinematics structure. Rev Sci Instrum2006; 77: 115101–115101.
13.
AwtarSUstickJSenS. An XYZ parallel kinematic flexure mechanism with geometrically decoupled degrees of freedom. ASME J Mech Robot2012; 5: 015001–015001.
14.
SuHDorozhkinDVVanceJM. A screw theory approach for the conceptual design of flexible joints for compliant mechanisms. J Mech Robot2009; 1: 041009–041009.
15.
SuHTariH. On line screw systems and their application to flexure synthesis. J Mech Robot2011; 3: 011009–011009.
16.
HopkinsJBCulpepperML. Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT)-Part I: principles. Precision Eng2010; 34: 259–270.
17.
HopkinsJBCulpepperML. Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT)-Part II: practice. Precision Eng2010; 34: 271–278.
18.
HowellLLMaglegySPOlsenBM. Handbook of compliant mechanisms, New York: Wiley, 2013.
19.
Kong X and Gosselin CM. Type synthesis of linear translational parallel manipulators. In: Lenarcic J and Thomas F (eds) Advances in robot kinematics – theory and applications. Springer, Netherlands: Kluwer Academic Publishers, 2002, pp.453–462.
20.
GoguG. Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations. Eur J Mech A/Solids2004; 23: 1021–1039.61.
Li H, Hao G, and Kavanagh K. 2014. Synthesis of decoupled spatial translational compliant parallel mechanisms via freedom and actuation method (FAM). In: Proceedings of the ASME 2014 Biennial Conference on Engineering Systems Design and Analysis (ESDA 2014), 25–27 June 2014, ESDA 2014-20196, Copenhagen, Denmark.
23.
Hao G and Li H. Conceptual designs of multi-DOF compliant parallel manipulators composed of wire-beam based compliant mechanisms. Proc IMechE, Part C: J Mechanical Engineering Science. Epub ahead of print 15 May 2014. DOI: 10.1177/0954406214535925.
24.
Awtar S. Analysis and synthesis of planar kinematic XY mechanisms. ScD Thesis, Massachusetts Institute of Technology, Cambridge, MA, United States, 2004.
25.
Hao G, Meng Q and Li Y. Design of large-range XY compliant parallel manipulators based on parasitic motion compensation. In: Proceedings of the ASME 2013 international design engineering technical conferences & computers and information in engineering conference, 4–7 August 2013, DETC2013–12206, Portland, Oregon, USA.
26.
HaoG. Towards the design of monolithic decoupled XYZ compliant parallel mechanisms for multifunction applications. Mech Sci2013; 4: 291–302.
27.
Li H and Hao G. Decoupled compliant mechanism reconfiguration based on position space concept for reducing parasitic motion. In: ASME 2015 international design engineering technical conferences & computers and information in engineering conference (IDETC/CIE 2015), 2–5 August 2015, Boston, Massachusetts, USA (accepted).
