This review looks at the basic classes of elastic contacts and provides practical information about the kind of response which can be expected when loads are applied. Attention is given to all kinds of contact except those which can be analysed using half-plane theory (like Hertz) and their general features explained. These remarks are relevant to all kinds of contact solutions, whether obtained partly by analytical methods or purely by numerical means.
DundursJ. Discussion of edge-bonded dissimilar orthogonal wedges under normal and shear loading by D B Bogy. J Appl Mech1969; 36: 650–652.
2.
DeresiewiczHBodies in elastic contact with applications to granular media. In: Herr-mannGeo (ed.). R. D. Mindlin and Applied Mechanics, New York: Pergamon Press, Inc., 1974, pp. 105–147.
3.
SpenceDA. The hertz contact problem with finite friction. J Elast1975; 5: 297–319.
4.
CattaneoC. Sul Contatto di due Corpi Elastici. Atti Accad. naz. Lincei Rc. Ser 61938; 27: 342–348, 434–436, 474--478.
5.
MindlinRD. Compliance of elastic bodies in contact. J Appl Mech1949; 16: 259–268.
6.
BarberJR. Elasticity, 3rd ed. Dordrecht: Springer, 2010, pp. 171–198.
7.
Perrson A. On the stress distribution of cylindrical elastic bodies in contact. Dissertation, Chalmers Tekniska Hogskola, Göteborg, 1964.
JaegerJ. New solutions in contact mechanics2004WIT Press.
10.
HillsDANowellDSackfieldA. Mechanics of elastic contact, Oxford: Butterworth Heinemann, Jordan Hill, 1993.
11.
WilliamsML. Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J Appl Mech1952; 19: 526–528.
12.
Karuppanan S. Analysis of incomplete and complete contacts in sliding and partial slip. D Phil Thesis, Oxford University, Michaelmas term, 2007.
13.
ChurchmanCMHillsDA. General results for complete contacts subject to oscillatory shear. J Mech Phys Solids2006; 54: 1186–1205.
14.
ChurchmanCMHillsDA. Slip zone length at the edge of a complete contact. Int J Solids Struct2006; 43: 2037–2049.
15.
GdoutosEETheocarisPS. Stress concentrations at the apex of a plane interacting on an elastic half-plane. J Appl Mech1975; 42: 688–692.
16.
ComninouM. Stress singularity at a sharp edge in contact problems with friction. J Appl Math Phys1976; 27: 493–499.
17.
KaruppananSChurchmanCMHillsDA. Sliding frictional contact between a square block and an elastically similar half-plane. Eur J Mech A/Solids2008; 27: 359–443.
18.
KaruppananSHillsDA. Frictional complete contacts between elastically similar bodies subject to shear and normal load. Int J Solids Struct2008; 45: 4662–4675.
19.
Flicek R, Ramesh R and Hills DA. A complete frictional contact: the transition from normal load to sliding. Int J Eng Sci (Under review).
20.
KeerLMDundursJTsaiKC. Problems involving a receding contact between a layer and a half-space. J Appl Mech1972; 39: 1115–1120.
21.
KeerLMSilvaMAG. Two mixed problems for a semi-infinite layer. J Appl Mech1972; 39: 1121–1124.
22.
DundursJProperties of elastic bodies in contact. In: de PaterADKalkerJJ (eds). Mechanics of contact between deformable bodies1975Delft University Press, pp. 54–54.
23.
ChaiseTPaynterRJHHillsDA. Contact analysis of a semi-infinite strip pressed onto a half plane by a line force. Int J Mech Sci2014; 81: 60–64.
24.
AhnYJBarberJR. Response of frictional receding contact problems to cyclic loading. Int J Mech Sci2008; 50: 1519–1525.
25.
ThaitirarotAHillsDADiniD. Contact mechanics of frictional lap joints. J Strain Anal2013; 48: 321–329.
26.
KartalMEBarberJRHillsDA. Partial Slip problem for two semi-infinite strips in contact. Int J Eng Sci2011; 49: 203–211.
27.
KartalMHillsDANowellD. Torsional contact between elastically similar flat-ended cylinders. Int J Solids Struct2010; 47: 1375–1380.
28.
HillsDADiniD. Common edge contacts: effect of interface line orientation. Int J Mech Sci2014; 81: 73–76.
ChurchmanCMKorsunskyAMHillsDA. The application of plasticity principles to friction. J Strain Anal2006; 41(4): 323–328.
32.
BarberJRKlarbringACiavarellaM. Shakedown in frictional contact problems for the continuum. C R Mecanique2008; 336: 3441–3450.
33.
KlarbringACiavarellaMBarberJR. Shakedown in elastic contact problems with Coulomb friction. Int J Solids Struct2007; 44: 8355–8365.
34.
AhnYJBarberJR. Response of frictional receding contact problems to cyclic loading. Int J Mech Sci2008; 50: 1519–1525.
35.
BarberJR. Frictional systems subjected to oscillating loads. Ann Solid Struct Mech2011; 2: 45–55.
36.
Flicek R, Barber JR, Hills DA, et al. Determination of the shakedown limit for large, discrete frictional systems. Euro J Mech Solids Under review.
37.
PugnoNCiavarellaMCornettiP. Generalized Paris law for fatigue crack growth. J Mech Phys Solids2005; 54: 1333–1349.
38.
DunneFPEWilkinsonAJAllenR. Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal. Int J Plast2007; 23(2): 273–295.
39.
SabsabiMGinerEFuenmayorFJ. Experimental fatigue testing of a fretting complete contact and numerical life correlation using X-FEM. Int J Fatigue2010; 33: 811–822.
40.
MugaduAHillsDALimmerL. An asymptotic approach to crack initiation in fretting fatigue of complete contacts. Int J Mech Phys Solids2000; 50: 531–547.
41.
DiniDHillsDA. Bounded asymptotic solutions for incomplete contacts in partial slip. Int J Solids Struct2004; 41: 7049–7062.
42.
DiniDSackfieldAHillsDA. Comprehensive bounded asymptotic solutions for incomplete contacts in partial slip. J Mech Phys Solids2005; 53: 437–454.
43.
HillsDAThaitirarotABarberJR. Correlation of fretting fatigue experimental results using an asymptotic approach. Int J Fatigue2012; 43: 62–75.
