A series of fatigue tests is carried out to investigate the behavior of microcrack initiation and propagation in Al 7075-T6. Plate specimens with semi-circular single edge notch are tested under uniaxial loading at different load amplitudes. Optical microscopy is used to detect the initiation and growth of short cracks. Continuum damage mechanics is used to model the crack initiation. After the initiation, crack growth is studied using fracture mechanics models. For both regions of crack initiation and growth, Bayesian estimation method is used to account for uncertainties in the parameters of the model. Results of the entire fatigue life, including initiation and growth, are compared with experiments. Good agreement is observed.
LemaitreJIntroduction to continuum damage mechanics. In: AllixOHildF (eds). Continuum damage mechanics of materials and structures, Amsterdam: Elsevier Science Ltd., 2002, pp. 235–258.
19.
KujawskiDEllyinF. Crack initiation and total fatigue life of a carbon steel in vacuum and air. J Test Eval1993; 20: 391–395.
20.
MartinWSWirschingPH. Fatigue crack initiation–propagation reliability model. J Mater Civil Eng ASCE1991; 3: 1–18.
21.
KaynakCAnkaraABakerTJ. Effects of short cracks on fatigue life calculations. Int J Fatigue1996; 18: 25–31.
22.
MurtazaGAkidR. Modelling short fatigue crack growth in a heat-treated low-alloy steel. Int J Fatigue1995; 17: 207–214.
23.
Majumdar S, Chopra OK and Shack WJ. Interim failure design curves for carbon, low-alloy, and austenitic stainless steels in LWR environments. In: Proceedings of 20th WRSM, 3 March 1993, vol. 3, NUREG/CP-0126.
24.
Bhattacharya B and Ellingwood B. A damage mechanics based approach to structural deterioration and reliability. NUREG/CR-6546, ORNL/SUB/96=SP638, 1998. Washington, DC: Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission.
25.
BhattacharyaBEllingwoodB. Continuum damage mechanics analysis of fatigue crack initiation. Int J Fatigue1998; 20: 631–639.
26.
BhattacharyaBEllingwoodB. A new CDM based approach to structural deterioration. Int J Solids Struct1999; 36: 1757–1779.
27.
QuraishiSMKhonsariMMBaekDK. A thermodynamic approach for predicting fretting fatigue life. Trib Lett2005; 19: 169–175.
28.
BeheshtiAKhonsariMM. A thermodynamic approach for prediction of wear coefficient under unlubricated sliding condition. Trib Lett2010; 38: 347–354.
29.
CroweDFeinbergA. Design for reliability, Boca Raton, FL: CRC Press, 2001.
30.
BasaranCNieS. An irreversible thermodynamics theory for damage mechanics of solids. Int J Damage Mech2004; 13: 205–223.
31.
NaderiMAmiriMKhonsariMM. On the thermodynamic entropy of fatigue fracture. Proc R Soc A2010; 466: 423–438.
32.
KhonsariMMAmiriM. Introduction to thermodynamics of mechanical fatigue, Boca Raton, FL: CRC Press, 2012.
33.
ChowCLWeiY. A damage mechanics model of fatigue crack initiation in notched plates. Theor Appl Fract Mech1991; 16: 123–133.
34.
LemaitreJChabocheJL. Mechanics of solid materials, Cambridge: Cambridge University Press, 1990.
35.
AmiriMNaderiMKhonsariMM. An experimental approach to evaluate the critical damage. Int J Damage Mech2011; 20: 89–112.
36.
XueYMcDowellDLHorstemeyerMF. Microstructure-based multistage fatigue modeling of an aluminum alloy 7075-T651. Eng Fract Mech2007; 74: 2810–2823.
37.
Dowling NE. Mean stress effects in stress-life and strain-life fatigue. SAE F2004/51, 2004.
38.
Anand L and Parks DM. Defect-free fatigue. Supplementary Notes, Massachusetts Institute of Technology, 2004.
39.
Rabiei M. A Bayesian framework for structural health management using acoustic emission monitoring and periodic inspections. PhD Thesis, University of Maryland, USA, 2011.
40.
CowlesMK. Review of WinBUGS 1.4. Am Stat2004; 58: 330–336.
41.
NtzoufrasI. Bayesian modeling using WinBUGS, New Jersey: John Wiley & Sons, Inc., 2009.
42.
PearsonS. Initiation of fatigue cracks in commercial aluminum alloys and the subsequent propagation of very short cracks. Eng Fract Mech1975; 7: 235–247.
43.
Kitagawa H and Takahashi S. Applicability of fracture mechanics to very small cracks or the cracks in the early stage. In: Proceedings of the second international conference on mechanical behavior of materials. Metals Park, OH: ASM, 1976, pp.627–631.
44.
El HaddadMHTopperTHSmithKN. Prediction of non propagating cracks. Eng Fract Mech1979; 11: 573–584.
45.
SureshSRitchieRO. Propagation of short fatigue cracks. Metals Rev1984; 29: 445–476.
46.
KaynakCAnkaraA. Short fatigue crack growth in Al 2024-T3 and Al 7075-T6. Eng Fract Mech1992; 43: 769–778.
47.
ZhangJZHallidayMDPooleP. Crack closure in small fatigue cracks: a comparison of finite element predictions with in-situ scanning electron microscope measurements. Fatigue Frac Eng Mater Struct1997; 20: 1279–1293.
48.
HussainK. Short fatigue crack behaviour and analytical models: a review. Eng Fract Mech1997; 58: 327–354.
49.
DowlingNE. Mechanical behavior of materials: engineering methods for deformation, fracture, and fatigue, 2nd ed. New Jersey: Prentice Hall, 1999.
50.
ZhangHFatemiA. Short fatigue crack growth from a blunt notch in plate specimens. Int J Fract2011; 170: 1–11.
51.
HerbigMKingAReischigP. 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography. Acta Mater2011; 59: 590–601.
52.
CastroJTPMeggiolaroMAMirandaACO. Prediction of fatigue crack initiation lives at elongated notch roots using short crack concepts. Int J Fatigue2012; 42: 172–182.
53.
El HaddadMHDowlingNETopperTH. J integral applications for short fatigue cracks at notches. Int J Fract1980; 16: 15–30.
54.
WanhillRJHShort cracks in aerospace structures. In: MillerKJde los RiosER (eds). The behavior of short fatigue cracks, London: Mechanical Engineering Publications, 1986, pp. 27–36.
55.
MackayTL. Fatigue crack propagation rate at low ΔK of two aluminum sheet alloys, 2024-T3 and 7075-T6. Eng Fract Mech1979; 11: 753–761.
56.
TadaHParisPCIrwinGR. The stress analysis of cracks handbook, New York: ASME Press, 2000.
