Statics modeling and analysis of linear rolling guideway considering rolling balls contact

Abstract

The linear rolling guideway is composed of rail, carriage, rolling balls, and other accessories and contains a large number of rolling interfaces between the rolling balls and the grooves. For such a complex nonlinear mechanical system, it is very significant to obtain the statics deformation and vertical stiffness under different loads for the structural design of guideway and mechanical analysis of Computer Numerical Control (CNC) machine tool. Therefore, the focus of this study is on the development of statics modeling techniques of the linear rolling guideway by analytical and finite element methods, considering the rolling balls contact. First, an accurate statics analytical modeling method was proposed by using the Hertz contact theory and revision of experiment results. Then, on the basis of considering contacts between rolling balls and grooves, the precise finite element modeling was studied. To improve the efficiency of analysis, the full finite element model of guideway was replaced by the component finite element model. At last, the created analytical and component finite element models were applied to analyze the effects of load and preload on the statics characteristics of single ball and the whole guideway system. The proposal of current study may provide a reference to create the precise dynamics model of linear rolling guideway.

Keywords

Linear rolling guideway statics modeling rolling balls contact analytical and finite element methods

Get full access to this article

View all access options for this article.

References

Ohta

. Sound of guideway type recirculating linear ball bearings. J Tribol-Trans ASME 1999; 121: 678–685.

Kim

Choi

. Dynamic analysis of a linear motion guide having rolling elements for precision positioning devices. J Mech Sci Technol 2008; 22: 50–60.

Ohta

Hayashi

. Vibration of linear guideway type recirculating linear ball bearings. J Sound Vib 2000; 235: 847–861.

Hung

. Load effect on the vibration characteristics of a stage with rolling guides. J Mech Sci Technol 2009; 23: 89–99.

Chang

Hung

. The effect of contact interface on dynamic characteristics of composite structures. Math Comput Simul 2007; 74: 454–467.

Montana

. The kinematics of contact and grasp. Int J Robot Res 1988; 7: 17–32.

Cui

Dai

. A darboux-frame-based formulation of spin-rolling motion of rigid objects with point contact. Robot IEEE Trans 2010; 26: 383–388.

Lin

Hung

. Effect of preload of linear guides on dynamic characteristics of a vertical column–spindle system. Int J Mach Tools Manuf 2010; 50: 741–746.

Hung

Lin

. Fault detection of linear guide preload of a positioning stage with vibration–acoustic analysis. J Failure Anal Prev 2011; 11: 684–692.

10.

Ohta

Tanaka

. Vertical stiffnesses of preloaded linear guideway type ball bearings incorporating the flexibility of the carriage and rail. J Tribol-Trans ASME 2010; 132: 1–9.

11.

THK Co., Ltd., Features of the LM guide.

12.

Johnson

. Contact mechanics, New York: Cambridge University Press, 1985.