Theoretical modeling and error analysis for CNC whirling of the helical surfaces of custom screws using common inserts

Abstract

With the wide use of complex helical surfaces in screw components, it becomes more and more urgent to investigate efficient ways for the design and manufacture of components of this kind. This study establishes the mathematical model of helical surface based on discrete points on its axial section profile using cubic spline curve fitting method, and presents a theoretical approach to calculate the tool path for the whirling process which aims to produce the helical surface through enwrapping movements of standard cutters inserted in the tool ring. The approach is implemented in MATLAB environment focusing on the calculation of the cutter location points. After that, the theoretical machining error is analyzed focusing on the scallop height, which can be divided into axial and cross-sectional errors. Finally, a case study is provided, together with numerical simulation demonstrating the validity of the proposed approach.

Keywords

Helical surface whirling process modeling tool path calculation numerical simulation

Get full access to this article

View all access options for this article.

References

. Equivalent normal curvature approach milling model of machining freeform surfaces. Chin J Mech Eng Engl Ed 2008; 21: 52–57.

Jung

. Mathematical model and sensitivity analysis for helical groove machining. Int J Mach Tools Manuf 2006; 46: 1087–1096.

Ivanov

Nankov

. Profiling of rotation tools for forming of helical surfaces. Int J Mach Tools Manuf 1998; 38: 1125–1148.

Sun

Wang

Guo

. Modeling and numerical simulation for the machining of helical surface profiles on cutting tools. Int J Adv Manuf Technol 2008; 36: 525–534.

Zhang

Wang

. A practical method of modeling and simulation for drill fluting. Int J Mach Tools Manuf 2006; 46: 667–672.

Oancea

. Geometrical design of cutting tools with surfaces of revolution for helical surfaces. Proc IMechE, Part C: J Mechanical Engineering Science 1997; 211: 559–566.

Oancea

Popa

Teodor

. Tool profiling for generation of discrete helical surfaces. Int J Adv Manuf Technol 2010; 50: 37–46.

Teodor

Popa

Oancea

. The profiling of end mill and planing tools to generate helical surfaces known by sampled points. Int J Adv Manuf Technol 2010; 51: 439–452.

Yang

S-C

. A mathematical model of a cc-type single-screw compressor. Proc IMechE, Part C: J Mechanical Engineering Science 2004; 218: 437–448.

10.

Llie

. Parametric modelling of helical rotors for efficient design of twin-screw superchargers. Proc IMechE, Part C: J Mechanical Engineering Science 2007; 221: 267–272.

11.

Mohan

Shunmugan

. Simulation of whirling process and tool proﬁling for machining of worms. J Mater Process Technol 2007; 185: 191–197.

12.

Wang K, Jin Y and Sun X. Study on technology of CNC whirlwind enveloping milling for screw. In: International technology and innovation conference, Hangzhou, China, 6–7 June 2006. Stevenage, UK: IET, pp.28–31.