This paper presents an analysis of the design problems and requirements for underactuated mechanisms for robotic fingers. The case of performing a grasping task is considered and a solution is proposed that consists of a series of linked underactuated mechanisms. Optimality criteria are analysed with the aim of formulating a general design algorithm based on a suitable optimization problem. An example of a four-phalanx modular finger is used to highlight the practical feasibility of the proposed modular design concepts and procedures.
Byoung-HoK.Byung-JuY.Sang-RokO.II HongS.Non-dimensionalized performance indices based optimal grasping for multi-fingered hands. Mechatronics, 2004, 14, 255–280.
2.
SrinathA.RaoA. C.Kinematic chains for robot hands: grasp and rigidity. Mech. Mach. Theory, 2007, 42, 691–697.
3.
OlacF.RandalC. N.Learning dextrous manipulation skills for multifingered robot hands using the evolution strategy. Auton. Robots, 1998, 5, 395–405.
4.
MoralesA.SanzP. J.PobilA. P.FaggA. H.Vision-based three-finger grasp synthesis constrained by hand geometry. Robot. Auton. Syst., 2006, 54, 496–512.
5.
MayumiU.NitinA.YasuoK.TakashiS.NobuoW.Implementation of a distributed controller for the RWC dexterous hand. Robot. Auton. Syst., 1996, 18, 13–19.
6.
HonghaiL.JianD.An approach to carton-folding trajectory planning using dual robotic fingers. Robot. Auton. Syst., 2003, 42, 47–63.
7.
CeccarelliM.Fundamentals of mechanics of robotic manipulation, 2004 (Kluwer/Springer, Dordrecht, The Netherlands).
8.
CarrozzaM. C.SuppoC.SebastianiF.MassaB.VecchiF.LazzariniR.CutkoskyM. R.DarioP.The SPRING hand: development of a self-adaptive prosthesis for restoring natural grasping. Auton. Robots, 2004, 16, 125–141.
CabasR.CabasL. M.BalaguerC.Optimized design of the underactuated robotic hand2006Proceedings of the IEEE International Conference on Robotics and automationOrlando, Floridapp. 982–987 (IEEE Press, Piscataway, New Jersey) 15–19 May 2006.
11.
KrutS.A force-isotropic underactuated finger2005Proceedings of the IEEE International Conference on Robotics and automationBarcelona, Spainpp. 2314–2319 (IEEE Press, Piscataway, New Jersey) April 18–22, 2005.
WenzengZ.LeiT.YumingY.LiH.Study on multi-finger under-actuated mechanism for robotic hand. Chin. J. Mach. Des. Res., 2007, 23(6), 20–26.
16.
BégocV.KrutS.DombreE.DurandC.PierrotF.Mechanical design of a new pneumatically driven underactuated hand2007Proceedings of the IEEE International Conference on Robotics and automationRome, Italy927–933, (IEEE Press, Piscataway, New Jersey) 10–14 April 2007.
CeccarelliM.TavolieriC.ZhenL.Design considerations for underactuated grasp with a one D.O.F. anthropomorphic finger mechanism2006Proceedings of the IEEE/RSJ International Conference on Intelligent robots and systemsBeijing, People’s Republic of China1611–1616, access date 10 May 2011.
22.
RodriguezN. E. N.CarboneG.CeccarelliM.Optimal design of driving mechanism in a 1-DOF anthropomorphic finger. Mech. Mach. Theory, 2006, 41, 897–911, October 9–15, 2006 in Beijing, published in IEEE Xplore http://ieeexplore.ieee.org/xpl/aboutUs.jsp.
23.
LichenW.CarboneG.CeccarelliM.Designing an underactuated mechanism for a 1 dof finger operation. Mech. Mach. Theory, 2009, 44(2), 336–348.
24.
CarboneG.ShuangjiY.CeccarelliM.ZhenL.Design and simulation of a new underactuated mechanism for LARM hand2008Proceedings of the International Conference on Theory and practice of robots and manipulatorsTokyo, Japan253–260, in Proceedings of RoManSy 2008. 17thCISM-IFToMM Symposium on Robot Design, Dynamics, and Control. July 5–9, 2008, Tokyo, Japan, published by Springer in Wien.
25.
ShuangjiY.CeccarelliM.CarboneG.ZhenL.An optimal design for a new underactuated finger mechanism2008Proceedings of the Second European Conference on Mechanism science149–157, (Springer) 17–20 September 2008 in Cassino, published by Springer in Dordrecht.
26.
LowK. H.GeraldS. G. L.ChunlinZ.Biomimetic design and workspace study of compact and modular undulating fin body segments2007Proceedings of the IEEE International Conference on Mechatronics and automationHarbin, People’s Republic of China129–135, (IEEE Press, Piscataway, New Jersey) August 5–8, 2007.
27.
GosselinC. M.Adaptive robotic mechanical systems: a design paradigm. Trans., ASME, J. Mech. Des., 2006, 128, 192–198.
28.
JinsongG.ChaseW. K.MaglebyS. P.Comparison of assembly tolerance analysis by the direct linearization and modified Monte Carlo simulation methods1995Proceedings of the ASME Conference on Design engineering353–360, September 17–20, 1995 in Boston, Massachusetts, published by ASME publications in New York.
29.
ChaseW. K.JingsongG.MaglebyS. P.General 2-D tolerance analysis of mechanical assemblies with small kinematic adjustments. J. Des. Mfg, 1995, 5, 263–274.
30.
WittwerJ. W.ChaseW. K.HowellL. L.The direct linearization method applied to position error in kinematic linkages. Mech. Mach. Theory, 2004, 39, 681–689.
31.
HanselmanD.LittlefieldB.The student edition of MATLAB: Version 4, user's guide, 1995 (Prentice-Hall, New JerseyUpper Saddle River.
