Energy of high-amplitude sound that often appears in acoustic resonators with mean flow can be harnessed and converted into electricity for powering sensors and other devices. In this study, tests were conducted in a simple setup consisting of a pipe with a pair of baffles and a piezoelement. Tonal sound, corresponding to the second acoustic mode of the resonator, was excited due to vortex shedding/impinging on baffles in the presence of mean flow. Generated sound energy was partially converted into electrical energy by a piezoelement. About 0.55 mW of electric power was produced on a resistive electric load at acoustic pressure amplitudes in the pipe about 170 Pa and mean flow velocity 2.6 m/s.
HarrisC. M.Handbook of acoustical measurements and noise control, 1998 (Acoustical Society of America, Woodbury, New York).
2.
CulickF. E. C.Unsteady motions in combustion chambers for propulsion systems, AGARDograph AG-AVT-039, 2006 (NATO/RTO, Neuilly-sur-Seine Cedex, France).
3.
WilsonT. A.BeaversG. S.DeCosterM. A.HolgerD. K.RegenfussM. D.Experiments on the fluid mechanics of whistling. J. Acoust. Soc. Am., 1971, 50, 366–372.
4.
LiuF.PhippsA.HorowitzS.NgobK.CattafestaL.NishidaT.SheplakcM.Acoustic energy harvesting using an electromechanical Helmholtz resonator. J. Acoust. Soc. Am., 2008, 123, 1983–1990.
5.
NomotoH.CulickF. E. C.An experimental investigation of pure tone generation by vortex shedding in a duct. J. Sound Vib., 1982, 84, 247–252.
6.
BlackstockD. T.Fundamentals of physical acoustics, 2000 (Wiley, New York).
7.
MatveevK. I.CulickF. E. C.A study of the transition to instability in a Rijke tube with axial temperature gradient. J. Sound Vib., 2003, 264, 689–706.
