Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger

Abstract

A novel heat exchanger medium, a high-porosity (0.938) lattice-frame material (LFM), has been introduced for possible use in mechanically and thermally loaded heat exchanger applications. The LFM is made up of circular cylinders, forming tetrahedral unit cells. This paper describes the results of experiments and numerical simulation leading to a detailed understanding of the flow structure, pressure loss and heat transfer mechanisms.

It is shown that the circular LFM struts are responsible for approximately 85 per cent of the overall pressure losses in the unit cell by means of form drag at high Reynolds number. The LFM causes heat removal from the substrate by promoting flow mixing and also contributes to the overall heat transfer by convection from the strut surfaces. If a high thermal conductivity material is used, the strut and substrate contribute 57 and 43 per cent respectively of the total heat transfer. Steady numerical simulations show that a porosity of approximately 0.8 provides the best heat transfer performance for a fixed mass flowrate. However, the pressure loss monotonically increases as the porosity decreases within a range of porosity, 0.7 ≤ ε ≤ 0.938.

Keywords

periodic material multifunctional heat exchanger lattice-frame material (LFM)pressure drop heat transfer porosity

Get full access to this article

View all access options for this article.

References

Deshpande

V. S.

Fleck

N. A.

Ashby

M. F.

Effective properties of the octet-truss lattice material. J. Mech. Phys. Solids, 2001, 49, 1747–1769.

Deshpande

V. S.

Fleck

N. A.

Collapse of truss core sandwich beams in 3-point bending. Int. J. Solids Structs, 2001, 38, 6275–6305.

Kim

Hodson

H. P.

T. J.

Fluid-flow and substrate heat-transfer characteristics of ultralight lattice-frame materials. Int. J. Heat Mass Transfer, 2004, 47, 1129–1140.

Kim

Zhao

C. Y.

Hodson

H. P.

T. J.

Convective heat dissipation with lattice-frame materials. Mechanics of Mater., 2004 (in press).

Kim

Fluid-flow and heat transfer in a lattice-frame material. PhD thesis, Department of Engineering, University of Cambridge, 2003.

Coleman

H. W.

Steele

W. G.

Experimentation and Uncertainty Analysis for Engineers, 2nd edition, 1999 (John Wiley, New York).

FLUENT 5/6, User's Guide, 1998, pp. 1–4 (Fluent Inc., Lebanon, New Hampshire).

Kim

Fuller

A. J.

Hodson

H. P.

T. J.

An experimental study of thermal transport in lightweight metal foams at high Reynolds numbers. In Proceedings of the International Symposium on Compact Heat Exchangers, Grenoble, France, August 2002, pp. 227–232.

Zdravkovich

M. M.

Flow Around Circular Cylinders, Vol. 1: Applications, 1997, (Oxford Science Publications, Oxford).

10.

Bejan

Convection Heat Transfer, 2nd edition, 1995 (John Wiley, Chichester).

11.

Gnielinski

New equations for heat and mass transfer in turbulent pipe and channel flow. Int. Chem. Engng, 1976, 16, 359–368; reviewed by A. Bejan in reference [10], p. 365.

12.

T. J.

Evans

A. G.

On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity. Int. J. Heat Mass Transfer, 2001, 44, 2163–2175.