Abstract
The purpose of this paper is to evaluate the feasibility of a novel gap-controlled strategy for micro-EDM process using magnetic levitation. The tool is levitated and positioned accurately using a unique actuator arm. The actuator arm attained the required positioning accuracy in the thrust (Z) direction to ensure a uniform and smooth discharge free of arcing and short circuits. Experiments were carried out using a copper tool and EDM oil on Nimonic superalloy (Grade C-263). Material removal rate (79.26 µg/min), tool wear rate (19.75 µg/min), and average surface roughness (Ra = 1.196 µm) all proved the efficacy of the developed technology. Furthermore, the machining stability and average specific energy (1.7350 J/μg) were examined and compared to the experimental results of traditional EDM, as well as literature data. Maglev μ-EDM is substantially more stable than traditional EDM, according to a comparison of the current-voltage (V-I) curve. Microholes, micropores, recast layer, and other surface topographical features are detected in a low amount using FESEM. The bidirectional material movement and elemental diffusion are shown by elemental characterization using EDX analysis.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
