A novel quinoxaline-based phthalonitrile monomer, namely, 4,4′-(((quinoxaline-2,3-diylbis (oxy))bis (3,1-phenylene))bis (oxy))di-phthalonitrile (QDOP), was successfully synthesized by nucleophilic substitution reaction, which exhibits a low melting point (85°C) and a wide processing window (150°C). The QDOP monomer was cured with 4-aminophenoxy phthalonitrile (APPH) as catalyst by different temperature programs, and the curing process and kinetics were discussed in detail by non-isothermal differential scanning calorimetric (DSC). The QDOP polymer mainly forms triazine, isoindoline and phthalocyanine structure, as revealed by Fourier transform infrared (FTIR) spectroscopy, and its properties improved with the increase of post-curing temperature and curing time. After post-curing at 380°C, the polymer exhibited high storage modulus (3731 MPa), high glass-transition temperature (>400°C), and outstanding thermal stability and thermal oxidation stability.
WuMGuYHaoD, et al.Fluorinated phthalonitrile resin with excellent thermal stability and low dielectric constant for high‐frequency electronic packaging. Macromol Mater Eng2021; 307: 2100651. DOI: 10.1002/mame.202100651.
2.
ZuYZhangFChenD, et al.Wave-transparent composites based on phthalonitrile resins with commendable thermal properties and dielectric performance. Polymer2020; 198: 122490. DOI: 10.1016/j.polymer.2020.122490.
3.
WangZLZhengKGuoY, et al.Study of phthalonitrile resin modified by Si-B-C-N precursors with dynamic heat-resistant phase. J Therm Anal Calorim2023; 148(24): 1–12. DOI: 10.1007/s10973-023-12563-w.
4.
WangZLZhouXZhengK, et al.Simultaneously enhancing heat resistance and mechanical performance for phthalonitrile through in-situ formation of inorganic protective layer derived from low melting point oxide. Compos Appl Sci Manuf2023; 174: 107740. DOI: 10.1016/j.compositesa.2023.107740.
5.
WangZLHanYGuoY, et al.Preparation and characterization of a high heat resistant phthalonitrile resin modified by polyborosilazane ceramic precursor. Polym Adv Technol2022; 33: 1855–1866. DOI: 10.1002/pat.5642.
6.
LiuTQZhengFDingT-M, et al.Design and synthesis of a novel quinoxaline diamine and its polyimides with high-Tg and red color. Polymer2019; 179: 121612. DOI: 10.1016/j.polymer.2019.121612.
7.
StoefflerKAndjelicSLegrosN, et al.Polyphenylene sulfide (PPS) composites reinforced with recycled carbon fiber. Compos Sci Technol2013; 84: 65–71. DOI: 10.1016/j.compscitech.2013.05.005.
8.
WangHDayoAQWangJ, et al.Trifunctional quinoxaline‐based maleimide and its polymer alloys with benzoxazine: synthesis, characterization, and properties. J Appl Polym Sci2020; 138: 49694. DOI: 10.1002/app.49694.
9.
YuXYNaitoKKangC, et al.Synthesis and properties of a high-temperature naphthyl-based phthalonitrile polymer. Macromol Chem Phys2013; 214: 361–369. DOI: 10.1002/macp.201200492.
10.
KellerTMDominguezDD. High temperature resorcinol-based phthalonitrile polymer. Polymer2005; 46: 4614–4618. DOI: 10.1016/j.polymer.2005.03.068.
11.
LaskoskiMDominguezDDKellerTM. Synthesis and properties of a bisphenol A based phthalonitrile resin. J Polym Sci Polym Chem2005; 43: 4136–4143. DOI: 10.1002/pola.20901.
BaiSSunXChenX, et al.Synthesis and properties of a thioether bonded phthalonitrile resin. Mater Today Commun2020; 24: 101352. DOI: 10.1016/j.mtcomm.2020.101352.
14.
BabkinAVZodbinovEBBulgakovBA, et al.Low-melting siloxane-bridged phthalonitriles for heat-resistant matrices. Eur Polym J2015; 66: 452–457. DOI: 10.1016/j.eurpolymj.2015.03.015.
15.
YashwantraoGSahaS. Recent advances in the synthesis and reactivity of quinoxaline. Org Chem Front2021; 8: 2820–2862. DOI: 10.1039/d0qo01575j.
16.
ZhangHWuYZhangW, et al.Low cost and stable quinoxaline-based hole-transporting materials with a D-A-D molecular configuration for efficient perovskite solar cells. Chem Sci2018; 9: 5919–5928. DOI: 10.1039/c8sc00731d.
17.
LiuTQZhengFMaX, et al.High heat-resistant polyimide films containing quinoxaline moiety for flexible substrate applications. Polymer2020; 209: 122963. DOI: 10.1016/j.polymer.2020.122963.
18.
ChenCHYuTYWuJH, et al.Synthesis and properties of quinoxaline-containing benzoxazines and polybenzoxazines. ACS Omega2019; 4: 9092–9101. DOI: 10.1021/acsomega.9b01042.
19.
ShengHPengXGuoH, et al.Synthesis and thermal properties of a novel high temperature alkyl-center-trisphenolic-based phthalonitrile polymer. Mater Chem Phys2013; 142: 740–747. DOI: 10.1016/j.matchemphys.2013.08.033.
20.
ChenXLiuJXiZ, et al.Synthesis and thermal properties of high temperature phthalonitrile resins cured with self-catalytic amino-contanining phthalonitrle compounds. High Perform Polym2016; 29: 1209–1221. DOI: 10.1177/0954008316673419.
21.
SunBGShiHQYangKX, et al.Effects of 3-aminophenylacetylene on mechanical properties at elevated temperatures of carbon fiber/phthalonitrile composites. Compos Commun2020; 18: 55–61. DOI: 10.1016/j.coco.2020.01.007.
22.
HeXWuHLvJ, et al.Study on the curing kinetics of phthalonitrile promoted by bio-tyrosine cyclic peptide. Polym Test2020; 90: 106753. DOI: 10.1016/j.polymertesting.2020.106753.
PattersonAL. X-ray diffraction procedures for polycrystalline and amorphous materials. J Am Chem Soc1955; 77: 2030–2031. DOI: 10.1021/ja01612a110.
25.
XuJWangHZhangZ, et al.Synthesis and properties of a high‐performance pyrimidine‐containing self‐catalyzed phthalonitrile polymer. J Polym Sci Polym Chem2019; 57: 2287–2294. DOI: 10.1002/pola.29459.
26.
JiaZZhangXWangX, et al.Structural design and synthesis of naphthalene‐containing phthalonitrile polymer with excellent processability and high temperature properties. J Polym Sci2023; 61: 2292–2302. DOI: 10.1002/pol.20230295.
27.
WuMXuJBaiS, et al.A high-performance functional phthalonitrile resin with a low melting point and a low dielectric constant. Soft Matter2020; 16: 1888–1896. DOI: 10.1039/c9sm02328c.
28.
XiZChenXYuX, et al.Synthesis and properties of a novel high temperature pyridine-containing phthalonitrile polymer. J Polym Sci Polym Chem2016; 54: 3819–3825. DOI: 10.1002/pola.28278.
29.
WangTShiCYQadeer DayoA, et al.Synthesis and properties of novel self-catalytic phthalonitrile monomers with aliphatic chain and their copolymerization with multi-functional fluorene-based benzoxazine monomers. Eur Polym J2021; 161: 110862. DOI: 10.1016/j.eurpolymj.2021.110862.
30.
LaskoskiMSchearMBNealA, et al.Improved synthesis and properties of aryl ether-based oligomeric phthalonitrile resins and polymers. Polymer2015; 67: 185–191. DOI: 10.1016/j.polymer.2015.04.071.
31.
DominguezDDKellerTM. Low-melting phthalonitrile oligomers: preparation, polymerization and polymer properties. High Perform Polym2006; 18: 283–304. DOI: 10.1177/0954008306060143.
32.
VyazovkinSBurnhamAKCriadoJM, et al.ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data. Thermochim Acta2011; 520: 1–19. DOI: 10.1016/j.tca.2011.03.034.
33.
WangTDayoAQWangZL, et al.Novel self-promoted phthalonitrile monomer with siloxane segments: synthesis, curing kinetics, and thermal properties. New J Chem2022; 46: 4072–4081. DOI: 10.1039/d1nj05656e.
34.
KumarDChoudharyV. Curing kinetics and thermal properties of imide containing phthalonitrile resin using aromatic amines. Thermochim Acta2020; 693: 178749. DOI: 10.1016/j.tca.2020.178749.
35.
XuMLuoYLeiY, et al.Phthalonitrile-based resin for advanced composite materials: curing behavior studies. Polym Test2016; 55: 38–43. DOI: 10.1016/j.polymertesting.2016.08.008.
36.
ZuYZongLWangJ, et al.Kinetic analysis of the curing of branched phthalonitrile resin based on dynamic differential scanning calorimetry. Polym Test2021; 96: 107062. DOI: 10.1016/j.polymertesting.2021.107062.
OzawaT. A new method of quantitative differential thermal analysis. Bull Chem Soc Jpn1966; 39: 2071–2085. DOI: 10.1246/bcsj.39.2071.
39.
StarinkMJ. The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods. Thermochim Acta2003; 404: 163–176. DOI: 10.1016/s0040-6031(03)00144-8.
40.
QiYWengZWangJ, et al.A novel bio-based phthalonitrile resin derived from catechin: synthesis and comparison of curing behavior with petroleum-based counterpart. Polym Int2018; 67: 322–329. DOI: 10.1002/pi.5507.
41.
YeJLiQZhangS, et al.Melamine modified phthalonitrile resins: synthesis, polymerization and properties. Polymer2022; 256: 125156. DOI: 10.1016/j.polymer.2022.125156.
42.
van KrevelenDW. Some basic aspects of flame resistance of polymeric materials. Polymer1975; 16: 615–620, DOI: 10.1016/0032-3861(75)90157-3.
43.
WangHWangJGuoH, et al.A novel high temperature vinylpyridine-based phthalonitrile polymer with a low melting point and good mechanical properties. Polym Chem2018; 9: 976–983. DOI: 10.1039/c7py01990d.
44.
PengWYaoFHuJ, et al.Renewable protein-based monomer for thermosets: a case study on phthalonitrile resin. Green Chem2018; 20: 5158–5168. DOI: 10.1039/c8gc01824c.
45.
BaiSSunXZhangZ, et al.Synthesis and properties of A low melting point phthalonitrile resin containing high density nitrile groups. ChemistrySelect2020; 5: 265–269. DOI: 10.1002/slct.201903930.
ChowTS. Molecular interpretation of the glass transition temperature of polymer-diluent systems. Macromolecules1980; 13: 362–364. DOI: 10.1021/ma60074a029.
49.
LaskoskiMClarkeJSNealA, et al.Synthesis of bisphenol A-free oligomeric phthalonitrile resins with sulfone and sulfone-ketone containing backbones. J Polym Sci Polym Chem2016; 54: 1639–1646. DOI: 10.1002/pola.28020.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
