The cost of CO2 separation and energy consumption can be decreased through the use of CO2 adsorption. Due to the electron-rich heteroatoms in its network, polyimide (PI) has a remarkable affinity for CO2. Polyethylene glycol (PEG) can increase the layer spacing of polymers, so as to change the mass transfer of CO2 in it. Furthermore, the ether bond (-O-) in PEG has good affinity for CO2. In this study, PEG-1000 was introduced into PI aerogel by mild sol-gel method at low temperature, and freeze-drying was used to produce PI/PEG composite aerogels with directional pore structure. The effect of PEG-1000 content and directional pore structure of the PI/PEG composite aerogels on CO2 adsorption performance were further studied. The L-PI/PEG-4 composite aerogel, which contains 4 g PEG and is directionally frozen in liquid nitrogen, has a CO2 adsorption capacity of 16.76 cm3/g at 25°C and 1 bar. L-PI/PEG-4 aerogel also exhibits high CO2/N2 selectivity and adsorption cycle stability.
GuoYFTanCWangP, et al.Structure-performance relationships of magnesium-based CO2 adsorbents prepared with different methods. Chem Eng J2020; 379.
2.
WuYZhangYChenNQ, et al.Effects of amine loading on the properties of cellulose nanofibrils aerogel and its CO2 capturing performance. Carbohydr Polym2018; 194: 252–259.
3.
D'AlessandroDMSmitBLongJR. Carbon dioxide capture: prospects for new materials. Angew Chem-Int Edit2010; 49: 6058–6082.
4.
ZhangL-HLiW-CLiuH, et al.Thermoregulated phase-transition synthesis of two dimensional carbon nanoplates rich in sp2 carbon and unimodal ultramicropores for kinetic gas separation. Angew Chem-Int Ed Engl2018; 57: 1632–1635.
5.
SunJShangMZhangM, et al.Konjac glucomannan/cellulose nanofibers composite aerogel supported HKUST-1 for CO2 adsorption. Carbohydr Polym2022; 293: 119720.
6.
ShimizuTKanamoriKMaenoA, et al.Transparent ethenylene-bridged polymethylsiloxane aerogels: mechanical flexibility and strength and availability for addition reaction. Langmuir2017; 33: 4543–4550.
PeiXLZhaiWTZhengWG. Preparation and characterization of highly cross-linked polyimide aerogels based on polyimide containing trimethoxysilane side groups. Langmuir2014; 30: 13375–13383.
9.
LiXYJiangQQDouS, et al.ZIF-67-derived Co-NC@CoP-NC nanopolyhedra as an efficient bifunctional oxygen electrocatalyst. J Mater Chem A2016; 4: 15836–15840.
10.
WangQFXiaWGuoWH, et al.Functional zeolitic-imidazolate-framework-templated porous carbon materials for CO2 capture and enhanced capacitors. Chem-Asian J2013; 8: 1879–1885.
11.
QianJFSunFAQinLZ. Hydrothermal synthesis of zeolitic imidazolate framework-67 (ZIF-67) nanocrystals. Mater Lett2012; 82: 220–223.
12.
WuTDongJDe FranceKJ, et al.Porous carbon frameworks with high CO2 capture capacity derived from hierarchical polyimide/zeolitic imidazolate frameworks composite aerogels. Chem Eng J2020; 395: 124927.
13.
ZhongYKongYZhangJJ, et al.Preparation and characterization of polyimide aerogels with a uniform nanoporous framework. Langmuir2018; 34: 10529–10536.
14.
GaoYDongCZhangF, et al.Constructing polyimide aerogels with carboxyl for CO2 adsorption. Polymers2022; 14: 359.
15.
RezaeiFWebleyP. Structured adsorbents in gas separation processes. Sep Purif Technol2010; 70: 243–256.
OjuvaAAkhtarFTomsiaAP, et al.Laminated adsorbents with very rapid CO2 uptake by freeze-casting of zeolites. ACS Appl Mater Inter2013; 5: 2669–2676.20.
18.
FurmaniakSTerzykAPGaudenPA, et al.The influence of carbon surface oxygen groups on Dubinin–Astakhov equation parameters calculated from CO2 adsorption isotherm. J Phys-Condes Matter2010; 22: 085003.
19.
LiuYWilcoxJ. Molecular simulation studies of CO2 adsorption by carbon model compounds for carbon capture and sequestration applications. Environ Sci Technol2013; 47: 95–101.
20.
PlazaMGThurechtKJPevidaC, et al.Influence of oxidation upon the CO2 capture performance of a phenolic-resin-derived carbon. Fuel Process Technol2013; 110: 53–60.
21.
BondarVIFreemanBDPinnauI. Gas sorption and characterization of poly(ether-b-amide) segmented block copolymers. J Polym Sci Pt B-Polym Phys1999; 37: 2463–2475.
22.
ZhangYFanWHuangY, et al.Graphene/carbon aerogels derived from graphene crosslinked polyimide as electrode materials for supercapacitors. RSC Adv2015; 5: 1301–1308.
23.
ChengSShenDZhuX, et al.Preparation of nonwoven polyimide/silica hybrid nanofiberous fabrics by combining electrospinning and controlled in situ sol–gel techniques. Eur Polym J2009; 45: 2767–2778.
24.
XuWDingYHuangR, et al.High-performance polyimide nanofibers reinforced polyimide nanocomposite films fabricated by co-electrospinning followed by hot-pressing. J Appl Polym Sci2018; 135: 46849.
25.
MaCZhouJZhuH, et al.Constructing a high-efficiency MoO3/polyimide hybrid photocatalyst based on strong interfacial interaction. ACS Appl Mater Inter2015; 7: 14628–14637.
26.
GangadharKNChangsanVBuatongW, et al.Phase behavior of rifampicin in cholesterol-based liquid crystals and polyethylene glycol. Eur J Pharm Sci2012; 47: 804–812.
27.
WangCWangWXinG, et al.Phase change behaviors of PEG on modified graphene oxide mediated by surface functional groups. Eur Polym J2016; 74: 43–50.
28.
ChenYShaoGKongY, et al.Facile preparation of cross-linked polyimide aerogels with carboxylic functionalization for CO2 capture. Chem Eng J2017; 322: 1–9.
29.
MeadorMABAgnelloMMcCorkleL, et al.Moisture-resistant polyimide aerogels containing propylene oxide links in the backbone. ACS Appl Mater Inter2016; 8: 29073–29079.
HeSZhangYShiX, et al.Rapid and facile synthesis of a low-cost monolithic polyamide aerogel via sol–gel technology. Mater Lett2015; 144: 82–84.
32.
KumarSPrasadKGilJM, et al.Mesoporous zeolite-chitosan composite for enhanced capture and catalytic activity in chemical fixation of CO2. Carbohydr Polym2018; 198: 401–406.
33.
WeiHDengSHuB, et al.Granular bamboo-derived activated carbon for high CO2 adsorption: the dominant role of narrow micropores. ChemSusChem2012; 5: 2354–2360.
34.
ZhongMKimEKMcGannJP, et al.Electrochemically active nitrogen-enriched nanocarbons with well-defined morphology synthesized by pyrolysis of self-assembled block copolymer. J Am Chem Soc2012; 134: 14846–14857.
35.
WangCOkubayashiS. Polyethyleneimine-crosslinked cellulose aerogel for combustion CO2 capture. Carbohydr Polym2019; 225: 115248.
36.
OhYLeVDMaitiUN, et al.Selective and regenerative carbon dioxide capture by highly polarizing porous carbon nitride. ACS Nano2015; 9: 9148–9157.
37.
JiangMLiHZhouL, et al.Hierarchically porous Graphene/ZIF-8 hybrid aerogel: preparation, CO2 uptake capacity, and mechanical property. ACS Appl Mater Inter2018; 10: 827–834.
38.
ZhangTZhangWZhangY, et al.Gas phase synthesis of aminated nanocellulose aerogel for carbon dioxide adsorption. Cellulose2020; 27: 2953–2958.
39.
WuYZhangYChenN, et al.Effects of amine loading on the properties of cellulose nanofibrils aerogel and its CO2 capturing performance. Carbohydr Polym2018; 194: 252–259.
40.
CuiSChengWShenX, et al.Mesoporous amine-modified SiO2 aerogel: a potential CO2 sorbent. Energ Environ Sci2011; 4: 2070–2074.
41.
WuPDuPZhangH, et al.Microscopic effects of the bonding configuration of nitrogen-doped graphene on its reactivity toward hydrogen peroxide reduction reaction. Phys Chem Chem Phys2013; 15: 6920–6928.
42.
LiuYWilcoxJ. Effects of surface heterogeneity on the adsorption of CO2 in microporous carbons. Environ Sci Technol2012; 46: 1940–1947.
43.
LimGLeeKBHamHC. Effect of N-containing functional groups on CO2 adsorption of carbonaceous materials: a density functional theory approach. J Phys Chem C2016; 120: 8087–8095.
44.
LiZLZhouYLYanW, et al.Cost-effective monolithic hierarchical carbon cryogels with nitrogen doping and high-performance mechanical properties for CO2 capture. ACS Appl Mater Inter2020; 12: 21748–21760.
45.
ShenCWangZ. Tetraphenyladamantane-based microporous polyimide and its nitro functionalization for highly efficient CO2 capture. J Phys Chem C2014; 118: 17585–17593.
46.
YuSZhaoXZhangJ, et al.A novel combining strategy of cellulose aerogel andhierarchically porous metal organic frameworks (HP-MOFs) to improve the CO2 absorption performance. Cellulose2022.
47.
RaoLLiuSWangL, et al.N-doped porous carbons from low-temperature and single-step sodium amide activation of carbonized water chestnut shell with excellent CO2 capture performance. Chem Eng J2019; 359: 428–435.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
